• Journal of the Korean Ceramic Society
• /
• v.53 no.2
• /
• pp.162-166
• /
• 2016

0.75BF-0.25BT ceramics were prepared by sintering at $980-1040^{\circ}C$ in air or under atmosphere powder. A sample with 1 mole %-excess $Bi_2O_3$ was also prepared to compensate for $Bi_2O_3$-evaporation. Physical and piezoelectric properties of these three samples were compared. When the sintering temperature increased from $980^{\circ}C$ to $1040^{\circ}C$, the density of the sample sintered in air decreased continuously due to Bi-evaporation. Due to the suppression of Bi-evaporation, the sample sintered under atmosphere powder had a higher density at sintering temperatures above $1000^{\circ}C$ than did the sample sintered in air. The addition of 1 mole %-excess $Bi_2O_3$ successfully compensated for Bi-evaporation and kept the density at the higher value until $1020^{\circ}C$. Grain size increased continuously when the sintering temperature increased from 980 to $1040^{\circ}C$, irrespective of the sintering atmosphere. When the sintering temperature increased, the piezoelectric constant ($d_{33}$) and the electromechanical coupling factor ($k_p$) increased for all samples. The sample with 1 mole % excess-$Bi_2O_3$ showed the highest density and the best piezoelectric properties at sintering temperature of $1020^{\circ}C$.

• KSBB Journal
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2003

Screening of a strain was carried out to produce an enantioselective lipase toward the precursor of ltraconazole as azole-containg compounds, which are well known as antifungal drug agents. An Acinetobacter sp. SY-01 strain which can selectively hydrolyze the racemic substrates was isolated and the racemic substrate was resolved to the S-ester in 95.6% enantiomeric excess after 74.8% hydrolysis. The optimum temperature and pH for the conversion were $50^{\circ}C$, pH 7.0. However, the temperature and pH had no effect on the enantiomeric excess. Addition of solvents decreased the conversion and slightly increased the enantiomeric excess. However, the kind of solvents had no effect on enantiomeric excess. The substrate concentration decrease enantiomeric excess and this is confirmed by the products generated from hydrolysis, and also enantiomeric excess could be increased by the removal of reaction products.

• Journal of the Korean Society of Combustion
• /
• v.9 no.1
• /
• pp.1-10
• /
• 2004

The results of a series of experiments executed by using two pilot-scale oxy-fuel burners are presented. The oxy-fuel burners are designed for maximum capacity of 50,000kcal/hr, 200,000kcal/hr and installed in the test furnace. The effects of turn-down ratio, excess oxygen ratio, nozzle exit velocity, injection angle, and swirl vane angle on the combustion characteristic are investigated. Temperature distributions are measured using R-type and Molybdenum sheathed C-type thermocouple at various points of the flame. The results showed that maximum temperature and mean temperature increase with the increase of turn-down ratio and momentum. The maximum flame temperature was increased about 35% compared to the case of equivalent air operated condition. In addition, optimum burner type, excess oxygen ratio and nozzle characteristics are obtained for this oxy-fuel glass melting furnace.

• Journal of Biosystems Engineering
• /
• v.25 no.4
• /
• pp.293-300
• /
• 2000

Automated greenhouse production system often require crop growth monitoring involving accurate quantification of plant physiological properties. Conventional methods are usually burdensome, inaccurate, and harmful to crops. A thermal image analysis system can accomplish rapid and accurate measurements of physiological-property changes of stressed crops. In this research a thermal imaging system was used to measure the leaf-temperature changes of several crops according to nutrient stresses. Thermal images were obtained from lettuce, cucumber, and pepper plants. Plants were placed in growth chamber to provide relatively constant growth environment. Results showed that there were significant differences in the temperature of stressed plants and non-stressed plants. In a case of the both N deficiency and excess, the leaf temperatures of cucumber were $2^{\circ}C$ lower than controlled temperature. The leaf temperature of cucumber was $2^{\circ}C$ lower than controlled temperature only when it was under N excess stress. For the potassium deficiency or excess stress, the leaf temperaures of cucumber and hot pepper were $2^{\circ}C$ lower than controls, respectively. The phosphorous deficiency stress dropped the leaf temperatures of cucumber and hot pepper $2^{\circ}C$ and $1.5^{\circ}C$ below than controls. However, the leaf temperature of lettuce did not change. It was possible to detect the changes in leaf temperature by infrared thermography when subjected to nutrition stress. Since the changes in leaf temperatures were different each other for plants and kinds of stresses, however, it is necessary to add a nutrient measurement system to a plant-growth monitoring system using thermography.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.4
• /
• pp.399-405
• /
• 1994

Beacuse of the energy resources exhaustion, the aggravating environmental air pollution and the smoke phenomena etc., the importance of clean gas fuel compared with liquid fuel is highly considered in recent years. The combustion system which consists of porous media is actively studied as a new method for solving above problems. Therefore, excess enthalpy combustion using porous media was interested by many researchers and investigated through numerical and experimental analysis. In this study, the simplified combustor has the unique combustion characteristics of mixture gas preheated effect using radiative and convective heat energy by changing the flow passage of unburned gas with solenoid valves and has the intensive excess enthalpy phenomena As the result of according to reduce equivalence ratio, flame temperature was remarkably higher than adiabatic flame temperature. This show the ability of super-lean combustion.

• Journal of the Korean Ceramic Society
• /
• v.30 no.1
• /
• pp.46-54
• /
• 1993

$\beta$-SiC was chemically vapor deposited by pyrolysis of MTS＋H2 gas mixture. The experiments were conducted in the temperature range of 1100~150$0^{\circ}C$ with a r.f. induction furnace under atmospheric pressure. The IR, XRD, EDS and AES analysis revealed that the free Si was always codeposited with SiC below 140$0^{\circ}C$, regardless of the total flow rate and MTS concentration, whereas $\beta$-SiC single phase was deposited at 150$0^{\circ}C$. C3H8 or CH2Cl2 as an excess C sources, was supplied with MTS in order to obtain stoichiometric SiC at low temperature. With the addition of C3H8 or CH2Cl2, the deposition rate was increased and $\beta$-SiC single phase could be deposited even at temperature as low as 110$0^{\circ}C$. In the absence of C3H8 or CH2Cl2, the microhardness of the layer was quite low (

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.2 s.33
• /
• pp.171-178
• /
• 2007

Objective : The aim of this study was to evaluate Yangdorak and D.I.T.I. for analysis of Symptom-complexes. Method : This study was selected 26 acne patients in Dongshin University Oriental Medical Hospital. We used Yangdorak (SME5800N, Sord Medicom Co., Korea) and D.I.T.I. (Digital Infrared Thermal Imaging 256, Dorex Inc, Orange CA, USA) and investigated the results of Yangdorak and D.I.T.I.. We made a comparison according to Deficiency or Excess(虛實) of acne patients. Result : In comparing Yangdorak results according to Deficiency or Excess(虛實) of acne patients, Triple-energizer(三焦), Intestine(大腸), Liver(肝), Stomach(胃) meridian in Excess group are higher than Deficiency group, and Kidney(腎) meridian in Deficiency group are lower than Excess group. D.I.T.I. reveald hyperthemia of face and chest on acne patients. The temperature of face and chest on Excess group is higher than Deficiency group. There is no statistically significant value compared with data of other group.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.399-404
• /
• 2008

The influence of gas hydrate dissociation on submarine slope stability was studied in this paper. Gas hydrates are stable under high pressure and low temperature conditions. Once gas hydrate dissociates due to natural or human activities, it generates large amount of gas and water. During gas hydrate dissociation, a pore pressure between soil particles increases and results in the loss of an effective stress and degradation of soil stiffness. A pore pressures model was proposed to calculated excess pore pressures generated by gas hydrate dissociation at the Storegga Slide. A slope stability analysis for the Storegga Slide using a two dimensional finite difference method was carried out by considering excess pore pressures due to gas hydrate dissociation. Since the excess pore pressure calculated by the proposed method resulted in the considerable loss of stiffness and strength in slope, a submarine slope failure occurred at the Storegga slide was well simulated.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.89-92
• /
• 2008

The extreme heat watch warning system(EHWWS) that Korea Meterological Administration carried out a preliminary from July 1, 2007, considered both daily maximum temperature and daily maximum heat index simultaneously. It was requested revision of the standard level of EHWWS to solve the difficulty of forecasting occurred when we were considering two parameters simultaneously and we did not considering heat index according to areas. For this, we established three type standard, such as type 1 that considered both daily maximum temperature and daily maximum heat index, Under the extreme heat day that daily minimum temperature was more than $25^{\circ}C$, type 2 that considered daily maximum temperature and type 3 that considered only daily maximum heat index and then analyzed whether these 3 types satisfies the excess mortality of the extreme heat warning or not. As a results, type 1 and 2 were more explain away excess mortality each warning step than type 3. type 2 could also apply case of not to consider heat index according to areas and had a merit for extreme heat forecasting easily because the standard was simple. Therefore we think type 2 is more suitable and reasonable standard for Korea extreme heat watch warning system(KEHWWS) than type 1. In addition, we need to develop model that exactly predicts the excess mortality will be take place during the extreme heat warning and construct KEHWWS.

• Microbiology and Biotechnology Letters
• /
• v.45 no.4
• /
• pp.358-364
• /
• 2017

Asymmetric PCR preferentially amplifies one DNA strand for use in DNA hybridization studies. Linear-After-The-Exponential-PCR (LATE-PCR) is an advanced asymmetric PCR method which uses innovatively designed primers at different concentrations. This study aimed to optimise LATE-PCR parameters to produce single-stranded DNA of Candida spp. and Aspergillus spp. for detection via probe hybridisation. The internal transcribed spacer (ITS) region was used to design limiting primer and excess primer for LATE-PCR. Primer annealing and melting temperature, difference of melting temperature between limiting and excess primer and concentration of primers were optimized. In order to confirm the presence of single-stranded DNA, the LATE-PCR product was hybridised with digoxigenin labeled complementary oligonucleotide probe specific for each fungal genus and detected using anti-digoxigenin antibody by dot blotting. Important parameters that determine the production of single-stranded DNA in a LATE-PCR reaction are difference of melting temperature between the limiting and excess primer of at least $5^{\circ}C$ and primer concentration ratio of excess primer to limiting primer at 20:1. LATE-PCR products of Candida albicans, Candida parapsilosis, Candida tropicalis and Aspergillus terreus at up to 1:100 dilution and after 1 h hybridization time, successfully hybridised to respective oligonucleotide probes with no cross reactivity observed between each fungal genus probe and non-target products. For Aspergillus fumigatus, LATE-PCR products were detected at 1:10 dilution and after overnight hybridisation. These results indicate high detection sensitivity for single-stranded DNA produced by LATE-PCR. In conclusion, this advancement of PCR may be utilised to detect fungal pathogens which can aid the diagnosis of invasive fungal disease.