• Journal of The Korean Association of Information Education
• /
• v.3 no.1
• /
• pp.134-142
• /
• 1999

The demand for recognizing the color as well as the object shape is increasing to use the detailed information, because-the expense of color input/output devices become cheap. The research on the color correction should be researched for the exact color presentation and color reproduction of color input/output systems. In this paper, we researched on the color correction of color scanner. The characterization of color scanner is a two step process of gray-balancing and color transformation. The decoupling of the gray-balancing from the color transformation enables the portability of the scanner characterization. We used the least square methods for the line fitting and the Neural Network for the storage space and computation speed. The output of Neural Network is similar to the target value in three-dimensional tristimulus space. The proposed color correction method can be used for all scanners of a manufacturer's model because of the portability.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.25.1-25.9
• /
• 2015

Background: During the orthognathic surgery, it is important to know the exact anatomical location of the mandibular foramen to achieve successful anesthesia of inferior alveolar nerve and to prevent damage to the nerves and vessels supplying the mandible. Methods: Cone-beam computed tomography (CBCT) was used to determine the location of the mandibular foramen in 100 patients: 30 patients with normal occlusion (13 men, 17 women), 40 patients with skeletal class II malocclusion (15 men, 25 women), 30 patients with skeletal class III malocclusion (17 men, 13 women). Results: The distance from the anterior border of the mandibular ramus to mandibular foramen did not differ significantly among the three groups, but in the group with skeletal class III malocclusion, this distance was an average of $1.43{\pm}1.95mm$ longer in the men than in the women (p < 0.05). In the skeletal class III malocclusion group, the mandibular foramen was higher than in the other two groups and was an average of $1.85{\pm}3.23mm$ higher in the men than in the women for all three groups combined (p < 0.05). The diameter of the ramus did not differ significantly among the three groups but was an average of $1.03{\pm}2.58mm$ wider in the men than in the women for all three groups combined (p < 0.05). In the skeletal class III malocclusion group, the ramus was longer than in the other groups and was an average of $7.9{\pm}3.66mm$ longer in the men than women. Conclusions: The location of the mandibular foramen was higher in the skeletal class III malocclusion group than in the other two groups, possibly because the ramus itself was longer in this group. This information should improve the success rate for inferior alveolar nerve anesthesia and decrease the complications that attend orthognathic surgery.

• Journal of Korean Academy of Nursing
• /
• v.41 no.1
• /
• pp.80-91
• /
• 2011

Purpose: This study was conducted to test the effects of a community health promotion project for farmers cultivating garlic. Bandura's self-efficacy theory (1986) and Chaskin's community capacity framework (2001) were used as the theoretical framework. Methods: A nonequivalent control group pretest-posttest design was used. Study participants were 72 garlic farmers (intervention: 36, control: 36). The community health promotion project consisted of health promotion program and community capacity building strategies and was provided for 12 weeks (8 during farming off-season and 4 during farming season). Data were collected between February 23 and May 31, 2009 and were analyzed using chi-square test, Fisher's exact test, t-test, and repeated measure ANOVA using SPSS/WIN 12.0. Results: For the experimental group, significant improvement was found for self-efficacy, farming related health behavior, physical fitness (muscle strength, muscle endurance, upper body flexibility, lower body flexibility, cardiovascular endurance, balance, agility), farmer's syndrome, and health related quality of life as compared to the control group. Conclusion: The findings of the study indicate that the community health promotion project for garlic farmers is effective and can be recommended as a nursing intervention for health promotion of garlic cultivating farmers.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.554-560
• /
• 2019

Excore Nuclear Flux Monitoring System in Nuclear Power Plant monitors continuous reactor power up to maximum 200%. The monitoring method, however, has to be different depending on the reactor power level. Because the logarithmic pulse signals must be counted and processed exactly due to large uncertainty if their levels are low, on the other hand, they must be processed through statistical methodolgies if theirs are high to get exact monitoring values, in point of thermal degradation view. Therefore, we developed thermal degradation input signal selection circuit to transfer low level reactor power monitoring circuit to high level reactor power circuit at rated value in this paper. We proved their validities through testing them using real data used in nuclear power plant and analyzed their results. And, These methods will be used to measure the neutron level of excore nuclear flux monitoring system in nuclear power plant.

• Journal of Korean Neurosurgical Society
• /
• v.50 no.1
• /
• pp.30-35
• /
• 2011

Objective : Morphometric data for the sympathetic ganglia (SG) of the upper thoracic spine was investigated to identify the exact location of the SG in order to reduce normal tissue injury in the thoracic cavity during thoracoscopic sympathectomy. Methods : In 46 specimens from 23 formalin-fixed adult cadavers, the authors measured the shortest distance from the medial margin of the T1, T2 and T3 SG to the most prominent point and medial margin of the corresponding rib heads, and to the lateral margin of the longus colli muscle. In addition, the distance between the most prominent point of the rib head and the lateral margin of longus colli muscle and the width of each SG were measured. Results : The shortest distance from the medial margin of the SG to the prominent point of corresponding rib head was on average 1.9 mm on T1, 4.2 mm, and 4.1 mm on T2, T3. The distance from the medial margin of the SG to the medial margin of the corresponding rib head was 4.2 mm on T1, 5.9 mm, and 6.3 mm on T2, T3. The mean distance from the medial margin of the SG to the lateral margin of the longus colli muscle was 6.7 mm on T1, 8.8 mm, 9.9 and mm on T2, T3. The mean distance between the prominent point of the rib head and the lateral margin of the longus colli muscle was 4.8 mm on T1, 4.6 mm, and 5.9 mm on T2, T3. The mean width of SG was 6.1 mm on T1, 4.1 mm, and 3.1 mm on T2, T3. Conclusion : We present morphometric data to assist in surgical planning and the localization of the upper thoracic SG during thoracoscopic sympathectomy.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.4
• /
• pp.333-339
• /
• 2009

Objective : Few studies on the clinical spectrum of automated pressure-controlled discography (APCD)-defined positive discs have been reported to date. Thus, the present study was undertaken to analyze clinical parameters critical for diagnosis of discogenic pain and to correlate imaging findings with intradiscal pressures and pain responses in patients with APCD-positive discs. Methods : Twenty-three patients who showed APCD-positive discs were selected for analysis. CT discogram findings and the degrees of nuclear degeneration seen on MRI were analyzed in comparison to changes of intradiscal pressure that provoked pain responses; and clinical pain patterns and dynamic factors were evaluated in relation to pain provocation. Results : Low back pain (LBP), usually centralized, with diffuse leg pain was the most frequently reported pattern of pain in these patients. Overall, LBP was most commonly induced by sitting posture, however, standing was highly correlated with L5/S1 disc lesions (p<0.01). MRI abnormalities were statistically correlated with grading of CT discogram results (p<005); with most pain response observed in CT discogram Grades 3 and 4. Pain-provoking pressure was not statistically correlated with MRI grading. However, it was higher in Grade 3 than Grade 4. Conclusion : APCD-positive discs were demonstrated in patients reporting centralized low back pain with diffuse leg pain, aggravated by sitting and standing. MRI was helpful to assess the degree of nuclear degeneration, yet it could not guarantee exact localization of the painful discs. APCD was considered to be more useful than conventional discography for diagnosis of discogenic pain.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.11
• /
• pp.1043-1051
• /
• 2007

The digital sun sensor calculates the incident sunlight angle using the sunlight image registered on a CMOS image sensor. In order to accomplish this, an exact center of the sunlight image has to be determined. Therefore, an accurate estimate of the centroid is the most important factor in digital sun sensor development. The most general method for determining the centroid is the thresholding method, and this method is also the simplest and easy to implement. Another centering algorithm often used is the image filtering method that utilizes image processing. The sun sensor accuracy using these methods, however, is quite susceptible to noise in the detected sunlight intensity. This is especially true in the thresholding method where the accuracy changes according to the threshold level. In this paper, a template method that uses the sunlight image model to determine the centroid of the sunlight image is suggested, and the performance has been compared and analyzed. The template method suggested, unlike the thresholding and image filtering method, has comparatively higher accuracy. In addition, it has the advantage of having consistent level of accuracy regardless of the noise level, which results in a higher reliability.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.64-71
• /
• 2010

Since 2010, it is estimated that the old building to be dismantled potentially will be about 8.9 million house in domestic country. Consequently, now domestic demolition market size of about 1.5 trillion won is forecasted to be grow rapidly into the size of 5.8 trillion won. But in the domestic country, preparation of the raw and regulation for the demolition industry is very insufficient compared with advanced country, and the related research is also very insufficient. Therefore, in this study, it is performed to analyse and predict a trend of domestic demolition market after analysing a current trend in overseas demolition industry. A demolition industry is a related industry fallen behind over 25 years compared with a construction industry. The exact analysis of those trends will make it possible to set the standard for demolition waste management. Also this study suggests methods be able to develop the demolition industry into main area of construction industry through those analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9C
• /
• pp.555-563
• /
• 2011

In this paper, we propose an object based 2D image to 3D conversion algorithm by using motion estimation, color labeling and non-local mean filtering methods. In the proposed algorithm, we first extract the motion vector of each object by estimating the motion between frames and then segment a given image frame with color labeling method. Then, combining the results of motion estimation and color labeling, we extract object regions and assign an exact depth value to each object to generate the right image. While generating the right image, occlusion regions occur but they are effectively recovered by using non-local mean filter. Through the experimental results, it is shown that the proposed algorithm performs much better than conventional conversion scheme by removing the eye fatigue effectively.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.2 s.8
• /
• pp.15-22
• /
• 1996

As the exact geographical information has been nowadays required for effective developing and using of national land, in the country, there has been interested in using of GPS, and its practical use is expected. Various kinds of fundamental research for practical use of GPS is being accomplished. In this study, a test was carried out over 9 stations with baseline of the range of 1.5 to 210km, and the accuracy of baseline length by GPS relative positioning was variously considered. As result of this study, using a GPS receiving L1 frequency only, baseline accuracy for 2 hour observation was of the order of 0.3ppm for the 10km, and for I hour was below 1ppm. Using a GPS receiving dual frequency(L1/L2), baseline accuracy was of the order of 0.3ppm for the 100km to 200km as 3 hour observation using double difference methods by carrier phase. With basic on the result of this study, when observation and baseline processing are proceeded by the selected optimum observation time and using of baseline processing method, we can expect that geographical information will be acquired effectively.