• Nuclear Engineering and Technology
• /
• v.25 no.4
• /
• pp.539-547
• /
• 1993

A stochastic approach using continuous time Markov process is presented to model the one-dimensional nuclide transport in fractured rock media as a further extension for previous works［1-3］. Nuclide transport of decay chain of arbitrary length in the single planar fractured rock media in the vicinity of the radioactive waste repository is modeled using a continuous time Markov process. While most of analytical solutions for nuclide transport of decay chain deal with the limited length of decay chain, do not consider the case of having rock matrix diffusion, and have very complicated solution form, the present model offers rather a simplified solution in the form of expectance and its variance resulted from a stochastic modeling. As another deterministic way, even numerical models of decay chain transport, in most cases, show very complicated procedure to get the solution and large discrepancy for the exact solution as opposed to the stochastic model developed in this study. To demonstrate the use of the present model and to verify the model by comparing with the deterministic model, a specific illustration was made for the transport of a chain of three member in single fractured rock medium with constant groundwater flow rate in the fracture, which ignores the rock matrix diffusion and shows good capability to model the fractured media around the repository.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.91-101
• /
• 1993

To predict accurately the thermal hydraulic behavior of light water reactors during normal or abnormal operation, the accurate estimation of the void distribution is required. Up to date, many techniques for predicting void fraction of two-phase flow systems have been suggested. Among these techniques, the drift-flux model is widely used because of its exact calculation ability and simplicity. However, to get more accurate prediction of void fraction using drift-flux model, slip and flow regime effects must be considered more properly In the drift-flux method, these two effects are accounted for by two drift-flux parameters ; $C_{o}$ and (equation omitted). At earlier stage, $C_{o}$ is measured in a circular tube. In this study, $C_{o}$ is experimentally determined by measuring local void fraction and vapor velocity distribution in a rectangular subchannel having 4 heating rods which simulates nuclear subchannels. The measurements are peformed with two-electrical conductivity probes which are known to be adequate for measuring local parameters. The experiments are performed at low flow rate and the system pressure less than 3 atmo spheric pressure. In this experiment, (equation omitted), is not measured, but quoted from well-known empirical correlation to formulate $C_{o}$. Finally, $C_{o}$ is expressed as a function of channel averaged void fraction. fraction.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.12
• /
• pp.57-67
• /
• 2009

Along with the advanced construction technologies, the maximum size of coarse aggregate used for dam construction ranges from several cm to 1m. Testing the original gradation samples is not only expensive but also causes many technical difficulties. Generally, indoor tests are performed on the samples with the parallel grading method after which the results are applied to the design and interpretation of the actual geotechnical structure. In order to anticipate the exact behavior characteristics for the geotechnical structure, it is necessary to understand the changes in the shear behavior. In this study, the Large Triaxial Test was performed on the parallel grading method samples that were restructured with river bed sand-gravel, with a different maximum size, which is the material that was used to construct Dam B in Korea. And the Stress - Strain characteristics of the parallel grading method samples and the characteristics of the shear strength were compared and analyzed. In the test results, the coarse-grained showed strain softening and expansion behavior of the volume, which became more obvious as the maximum size increased. The internal angle of friction and the shear strength appeared to increase as the maximum size of the parallel grading method sample increased.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.4
• /
• pp.33-46
• /
• 2007

HWAW (Harmonic Wavelet Analysis of Wave) method, which is non-destructive method using body and surface waves, has the advantages of obtaining 2D subsurface imaging because it uses a short receiver spacing to obtain the $V_s$ profile of whole depth. Even though the reliability of HWAW method has already been verified by using the numerical simulation in the various layered models, it is very difficult to evaluate the reliability of HWAW in the field because the exact $V_s$ values of the experimental site are unknown. In this study, a model testing site where the material properties and layer information could be controlled was constructed to verify the reliability of HWAW method. The detailed geometry of the testing site was strictly measured by surveying, and 140 vertical and horizontal geophones were established at the boundary of each layer to evaluate the dynamic material properties. Using the interval travel times between the upper and lower geophones, the body wave velocities of each layer were 2 dimensionally obtained as reference data, and comparative study using HWAW method was performed. By comparing 2D Vs profile obtained by HWAW method to the reference data, the reliability of HWAW method was verified.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.12
• /
• pp.5-14
• /
• 2006

In general, the dredged ground was composed of a big difference of sediment shape through segregating sedimentary of finer soil in case of reclaiming by dredged coarse soils. Therefore, this study was performed to evaluate the change of settling velocity of flow, and the density of sedimentary which is based on settling tests and self-weight consolidation tests, and consolidation test by seepage force according to the percentage of coarse of Kunsan dredge soils. The Yano's method has been applied to estimate the settlement of self-weight consolidation in finer soils at design but it only considers pouring water content and elevation of interface, therefore the other method needs to be introduced for the exact prediction of the settlement of coarse soil in which the segregation sedimentation is occurring. In this study, the settlement of self-weight consolidation was calculated by the change of the density of segregating sedimentary of coarse and finer soils which was analyzed by Yano's method to extend a serious of researches. The self-weight consolidation by Yano's method will not reflect the segregated settling in dredging coarse soil under 40% of #200 passing percentage. As a result, the evaluation technique of settlement of self-weight consolidation considering a change of the density of segregating sedimentary is suggested as a reasonable method that considers the sediment shape of coarse soil.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.2
• /
• pp.348-354
• /
• 2023

A tattoo is a cultural form that has been handed down to mankind for a long time. Traditional tattoo customs that have been handed down and developed in the various cultures of mankind have the important value of academic research in various fields such as history, art, society, etc. The Derung people, one of the minorities living in Yunnan Province and nearby areas in the southwest of China, have 'facial tattoo' customs. The traditional culture of the Derung people, which had maintained the form of primitive society until 1949 when the People's Republic of China was established, was passed down through oral tradition, so there are no preserved materials about their tattoo culture, showing the need for research on the culture. Therefore, it was conducted in two ways: a research on modern and contemporary literature and a field trip to Yunnan Province. The exact reason and time of facial tattoo customs are unknown, but the customs disappeared after being banned in 1966 due to the Chinese Cultural Revolution. The symbols and functions of facial tattoos can be largely divided into four categories, including religious worship, coming-of-age ceremonies, aesthetic decorations, and ethnic and social history, through an on-site survey and research by modern and contemporary scholars. And, it is known that women of the Derung People get tattoos from the age of 7 to 8. The design of facial tattoos became more complicated for upper-class women and simpler for lower-class women depending on the area they live. Tattoos are mainly performed by relatives, and mainly bamboo skewers and lixivium extracted from the bottom of the pot are used as the materials. Currently, there are fewer than 25 women of the Derung people with facial tattoos, and most of them are elderly. Therefore, they seem to disappear altogether within a few decades. Therefore, it is urgent to have documentation on the unique facial tattoo culture of the Derung people.

• Journal of Oriental Neuropsychiatry
• /
• v.34 no.2
• /
• pp.71-82
• /
• 2023

Objectives: The existing reductionist approach has not reached complete understanding of the cause of schizophrenia. The objective of this study was to investigate yin-yang and five-element characteristics reflected on four time pillars of birth of patients with schizophrenia through comparison with the general population in the perspective of consilience-based holistic approach. Methods: This study was conducted using a random sequential recruitment method for the general population and individuals with schizophrenia aged 18 to 64 based on the exact date and time of birth using structured questionnaires. Relative positional relations of yin-yang and five-element with day master were primarily examined. In addition, the strength of day master with a score range of 0~100 points was assessed through operational score allocation. Results: Of 591 participants, 576 (346: general population, 230: individuals with schizophrenia) were analyzed. Between-group analyses showed no significant difference in the distribution of types of day master (χ²=10.41, df=9, p=0.318). However, significant between-group differences were shown in the distribution of the strength of day master (t=2.14, p=0.032) and frequency of restraining month branch (χ²=5.23, df=1, p=0.022). In logistic regression analysis, 10-point increase on the strength of day master decreased the probability of onset of schizophrenia over the age of 30 by 29.6% (p=0.002; 95% confidence interval, 0.566~0.876). Conclusions: Findings in this study suggest that four time pillars of birth might be associated with schizophrenia through yin-yang and five-element theory and synchronicity principle, implicating the plausibility of consilience-based holistic approach in the determination of risk factors or cause of schizophrenia.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.9
• /
• pp.135-145
• /
• 2009

Generally, the phases of constructing information systems are consisted of systems planning and selection, system analysis, system design, and system implementation and operation. These systems require many efforts and costs for additional development of modification requirements due to a frequent changes of business environments and business processes. Especially, inconsistencies between system design and system implementation usually happen during development steps because of the difficulties of program developments due to difficulties of capturing exact user requirements and frequent changes of user requirements. This paper proposes a scheme of implementing meta-data based applications for enterprises in order to reduce inconsistencies between system design and system implementation and to overcome limits of the existing coding-based development methods of applications which must use until disuse if they are developed once. Also, this paper presents a framework of repository system to systematically manage and utilize meta-data. The core concept of the proposed scheme makes outputs generated in the phases of system analysis and design into meta-data and is to easily develop and customize application programs using meta-data repository. Also, to show the applicability of the proposed scheme, it is applied to implement ERP system of 'H' automotive part manufacturer. As a result, the proposed scheme can gain improvements such as easiness and productivity of program development, easiness of maintenance, reusability of program components, etc.

• Journal of Life Science
• /
• v.32 no.3
• /
• pp.241-248
• /
• 2022

NF-κB acts as a critical transcription factor in inflammation and innate immunity, and it is also closely involved in cell survival and tumorigenesis via induction of anti-apoptotic genes. In these processes, NF-κB cooperates with multiple other signaling molecules and pathways, and although many studies have demonstrated that Hsp90 regulates NF-κB activity, the exact mechanism is unclear. In this study, we investigated the relationship between Hsp90 and IKKγ in the regulation of NF-κB using expression plasmids of IKK complex components. Wild-type and deletion mutants of IKKγ were expressed together with Hsp90, and the combined regulatory effect of Hsp90 and IKKγ on NF-κB activation was assayed. The results show that Hsp90 activates NF-κB by promoting the phosphorylation and degradation of IκBα and that activation of NF-κB by NIK and LPS was increased by Hsp90. IKKγ elevated the effect of Hsp90 on NF-κB activation by increasing phosphorylation and degradation of IκBα. The positive regulation on NF-κB by Hsp90 and IKKγ was also proved in analysis with IKKβ-EE, the constitutively active form of IKKβ. In experiments with the deletion mutants of IKKγ, the N-terminal IKKβ binding domain, C-terminal leucine zipper, and zinc finger domains of IKKγ were found not necessary for the positive regulation of NF-κB activity. Additionally, the expression of pro-inflammatory cytokines was synergistically elevated by Hsp90 and IKKγ. These results indicate that inhibiting the interaction between Hsp90 and IKKγ is a possible strategic method for controlling NF-κB and related diseases.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.4
• /
• pp.287-295
• /
• 2022

As low altitude long-range artillery threat has been strengthened, the development of anti-artillery interception system to protect assets against its attacks will be kicked off. We view the defense of long-range artillery attacks as a typical dynamic weapon target assignment (DWTA) problem. DWTA is a sequential decision process in which decision making under future uncertain attacks affects the subsequent decision processes and its results. These are typical characteristics of Markov decision process (MDP) model. We formulate the problem as a MDP model to examine the assignment policy for the defender. The proximity of the capital of South Korea to North Korea border limits the computation time for its solution to a few second. Within the allowed time interval, it is impossible to compute the exact optimal solution. We apply approximate dynamic programming (ADP) approach to check if ADP approach solve the MDP model within processing time limit. We employ Shoot-Shoot-Look policy as a baseline strategy and compare it with ADP approach for three scenarios. Simulation results show that ADP approach provide better solution than the baseline strategy.