• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.285-291
• /
• 2015

In this paper, a composite material analysis program based on the finite element method(FEM) is used. The purpose of this study was to verify whether the composite material analysis program which developed as part of a project of development of softwares and educational contents for structural vibration and composite material analysis that can calculate how similar the macroscopic mechanical behavior of the composite materials actually. Because composite materials are generally anisotropic, analysis of composite laminate is used for the constitutive equations of orthotropic material. For convenience, the unit is ommited in all calculations. To verify the accuracy of the finite element method based program, the deflection and stress distribution of the simply supported composite material laminated plate subjected to a uniform load distribution is compared with exact solution. Size and properties of the composite material laminate used for analysis are fixed variables, and by changing the number of elements and the total thickness of the laminate is compared with the exact solution to the resulting value, respectively.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.6
• /
• pp.41-50
• /
• 2012

This paper presents a new sequence alignment method using the divide approach, which solves the problem by decomposing sequence alignment into several sub-alignments with respect to exact matching subsequences. Exact matching subsequences in the proposed method are bounded on the generalized suffix tree of two sequences, such as protein domain length more than 7 and less than 7. Experiment results show that protein sequence pairs chosen in PFAM database can be aligned using this method. In addition, this method reduces the time about 15% and space of the conventional dynamic programming approach. And the sequences were classified with 94% of accuracy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1419-1424
• /
• 1998

In phased array antennas that scan elevation, the number of radiator rows is one of the important factors to minimizing both cost and weitht. Therefore, the antenna tilt angles having relation with element spacing are among the improtant design parameters. The exact optimum tilt angles for several types of uniformly and nonuniformly excited arrays are obtained theoretically. Four types of uniform linear arrays and Chebyshev array factors as a nonuniformly excited arrav are considered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.1059-1065
• /
• 1998

It is very crucial to make the phase holograms have the exact phase difference in the fabrication process. We have developed a fabrication criterion of obtaining the exact phase difference of the holograms by using the relation between the zeroth order intensity of diffected beam and the relative phsse difference of the fabricaated holograms. We have fabricated holograms having phaes of .pi. and .pi./2, respectively, and we could get multi-phase holograms by combining these two binary thase holograms.

• Journal of Communications and Networks
• /
• v.11 no.5
• /
• pp.480-488
• /
• 2009

Cooperative transmission is an effective solution to improve the performance of wireless communications over fading channels without the need for physical co-located antenna arrays. In this paper, selection combining is used at the destination instead of maximal ratio combing to optimize the structure of destination and to reduce power consumption in selective decode-and-forward relaying networks. For an arbitrary number of relays, an exact and closed-form expression of the bit error rate (BER) is derived for M-PAM, M-QAM, and M-PSK, respectively, in both independent identically distributed and independent but not identically distributed Rayleigh fading channels. A variety of simulations are performed and show that they match exactly with analytic ones. In addition, our results show that the optimum number of relays depend not only on channel conditions (operating SNRs) but also on modulation schemes which to be used.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.3
• /
• pp.122-129
• /
• 2001

Exact simulation of conducted EMI in switched mode power supplies is proposed. In order to achieve exact simulation, PSPICE active component ABM model and modified transformer model are proposed. Each model parameter is extracted from measurements and data-books. PSPICE simulation results with high frequency PCB pattern model are accordant with EMI measurements for a 50[W] isolated flyback converter. EMI relations of each component and EMI patterns are analyzed.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.189-192
• /
• 2004

Utilizing pump selection softwares is becoming a new general trend in pump industries, substituting the old fashioned pump catalogs. One of the most powerful pump selection softwares is developed, which features pump performance viscosity correction function as well as pump selection based on the exact pump performance curves, NPSH warning, automatic determination of impeller diameter cutting to meet the customer's performance specification, performance simulation for the rpm and diameter variation, standard motor recommendation according to the motor standards and enclosure types and automatic pump datasheet generation for sales submission, automatic pump drawings and dimension generation for installation check and part preparation. This software provides pump distributors and customers with a quick, easy and exact pump selection, various performance curves review (system curves, performance curve of series or parallel operation) of the selected pumps.

• International Journal of Reliability and Applications
• /
• v.8 no.1
• /
• pp.1-16
• /
• 2007

In this paper, we derive exact explicit expressions for the triple and quadruple moments of the lower record values from inverse the Weibull (IW) distribution. Next, we present and calculate the coefficients of the best linear unbiased estimates of the location and scale parameters of IW distribution (BLUEs) for different choices of the shape parameter and records size. We then use the higher order moments and the calculated BLUEs to compute the mean, variance, and the coefficients of skewness and kurtosis of certain linear functions of lower record values. By using the coefficients of the skewness and kurtosis, we develop approximate confidence intervals for the location and scale parameters of the IW distribution using Edgeworth approximate values and then compare them with the corresponding intervals constructed through Monte Carlo simulations. Finally, we apply the findings of the paper to some simulated data.

• Structural Engineering and Mechanics
• /
• v.22 no.4
• /
• pp.433-447
• /
• 2006

The problem of very large deflection of a circular cantilever arc device subjected to inward or outward polar force is studied. An exact elliptic integral solution is derived for the two cases and the results are checked using large displacement finite element analysis via the ANSYS package by performing a new novel modeling simulation technique for this problem. Excellent agreements have been obtained between the exact analytical solution and the numerical approach. From this study, a design chart for engineers is developed to predict the required value for the inward polar force for the device to switch on for a given angle forming the circular arc (${\theta}_o$). This study has several interesting applications in mechanical engineering, integrated circuit technology, nanotechnology and especially in microelectromechanical systems (MEMs) such as a MEM circular device switch subjected to attractive or repulsive magnetic forces due to the attachments of two magnetic poles at the fixed and at the free end of the circular cantilever arc switch device.

• Structural Engineering and Mechanics
• /
• v.58 no.5
• /
• pp.783-797
• /
• 2016

Exact solutions for stresses, strains, and displacements of a perforated rectangular plate by an arbitrarily located circular hole subjected to both linearly varying in-plane normal stresses on the two opposite edges and in-plane shear stresses are investigated using the Airy stress function. The hoop stress occurring at the edge of the non-central circular hole are computed and plotted. Stress concentration factors (the maximum non-dimensional hoop stresses) depending on the location and size of the non-central circular hole and the loading condition are tabularized.