• 한국안전학회지
• /
• 제19권3호
• /
• pp.14-19
• /
• 2004

The objective of the present work is to examine evaporation cooling of droplet due to surface roughness under radiative heat input condition. The surface temperatures varied from $80\~160^{\circ}C$ on aluminum alloy (AL 2024) and surface roughness was $0.18{\mu}m,\;1.36{\mu}m$. The results are as follows; Regardless of surface roughness under radiative heat input condition, as droplet diameter is larger, the in-depth temperature of solid decreases and evaporation time increases. In the case of $0.18{\mu}m\;and\;1.36{\mu}m$ of surface roughness, the larger the surface roughness is, the less the evaporation time is and the larger the temperature within the solid is. In the case of $Ra=0.18{\mu}m$ evaporation time and time averaged heat flux for radiative heat input case is shorter than for the conductive case.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.289-290
• /
• 2012

In this study, it was evaluated about shrinkage properties of high strength concrete according to poly mix fiber and moisture evaporation condition. As a results, When concrete was mixed with poly mix fiber of spalling control, it reduced effect of shrinkage independent of the evaporation conditions of unsealed and sealed.

• 열처리공학회지
• /
• 제19권3호
• /
• pp.141-148
• /
• 2006

An experimental study is presented for water droplet impingement on a steel surface in the process of heat treatment. The objective of the present work is to examine characteristic of evaporation cooling due to surface roughness and droplet diameter under conductive heat input condition. The surface temperatures varied from $80{\sim}155^{\circ}C$, surface roughness was from $R_a=0.12{\mu}m$ to $R_a=1.14{\mu}m$ and droplet diameter was from 2.4 mm to 3.0 mm. The results show that the total evaporation time is shorter for the larger surface roughness and the smaller droplet size, the time average heat flux has maximum value for the larger surface roughness and the smaller droplet size. The total evaporation time has not influence on the nuclear boiling region.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2125-2131
• /
• 1991

본 연구에서는 고온고압의 기류중에 투입된 미소연료액적의 증발에 관한 정보 를 구하여 분무연소기구의 해명을 위한 기초테이터를 제공하려 시도한다.

• 한국지반신소재학회논문집
• /
• 제18권1호
• /
• pp.79-89
• /
• 2019

본 연구는 기존의 콘크리트 투수블록이 아닌 재활용 합성수지를 활용하여 제작된 투수블록의 열섬현상 완화의 기능성 측면인 표면온도의 저감효과를 확인하고자 야외계측과 실내실험을 진행하였다. 야외계측은 건조한 상태와 습윤상태를 고려하여 3일 동안 계측하였고, 실내실험은 건조 조건, 강우 모사 조건, 표층 습윤 조건 등으로 구분하여 온도의 변화와 실험 후 함수율의 증발비율을 확인하였다. 야외계측 결과, 가뭄이 지속되거나 일정수준의 수분이 표층에 없는 건조한 상태에서는 수분의 증발에 의한 기화잠열로 냉각효과가 발휘되기 보다는 투수블록 표면의 알베도에 의한 차이로 표면의 온도가 감소하는 것을 확인하였다. 실내실험 결과, 재생 합성수지 투수블록(RS 투수블록)은 콘크리트 투수블록보다 건조한 상태일때는 더 높은 표면온도를 기록하였으나 강우 모사조건에서는 공극내 수분의 증발이 모세관력에 의해 지속적으로 유지되어 더 높은 온도 저감율 보이는 것으로 나타났다. 실내실험 후 증발율을 측정한 결과 수분의 증발율이 높을수록 온도의 저감효과는 증가하는 것을 확인하였다. 이 결과를 바탕으로 증발율과 온도의 저감율에 대한 상관관계식을 도출하였다.

• 한국분무공학회지
• /
• 제26권2호
• /
• pp.73-80
• /
• 2021

Evaporation characteristics of single butanol gel fuel were investigated in different mass ratios of gellant and ambient temperatures. Gel fuel was made by adding the pure water and hydroxypropylmethyl cellulose (HPMC) into the 1-butanol. Increase of viscosity was observed when the loading of HPMC increased. The evaporation process of gel droplet could be divided into three stages: droplet heating, micro-explosion and crust formation. Elevation of ambient temperature helped boost the evaporation in all experimental cases, but the effect was mitigated when the mass ratio of HPMC increased. Increase of HPMC weight ratio reduced the evaporation rate.

• 한국지구과학회지
• /
• 제24권1호
• /
• pp.22-29
• /
• 2003

Temporal and spatial variability of precipitation (P), evaporation (E), and moisture balance (P-E; precipitation minus evaporation) has been investigated over the tropical ocean during the period from January 1998 to July 2001. Our data were analyzed by the EOF method using the satellite P and E observations made by the Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR) and the Special Sensor Microwave/Imager (SSM/I). This analysis has been performed for two three-year periods as follow; The first period which includes the El Ni${\tilde{n}}$o in early 1998 ranges from January 1998 to December 2000, and the second period which includes the La Ni${\tilde{n}}$o events in the early 1999 and 2000 (without El Ni${\tilde{n}}$o) ranges from August 1998 to July 2001. The areas of maxima and high variability in the precipitation and in the P-E were displaced from the tropical western Pacific and the ITCZ during the La Ni${\tilde{n}}$o to the tropical middle Pacific during the El Ni${\tilde{n}}$o, consistent with those in previous P studies. Their variations near the Korean Peninsula seem to exhibit a weakly positive correlation with that in the tropical Pacific during the El Ni${\tilde{n}}$o. The evaporation, out of phase with the precipitation, was reduced in the tropical western Pacific due to humid condition in boreal summer, but intensified in the Kuroshio and Gulf currents due to windy condition in winter. The P-E variability was determined mainly by the precipitation of which the variability was more localized but higher by 2-3 times than that of evaporation. Except for the ITCZ (0-10$^{\circ}$N), evaporation was found to dominate precipitation by ${\sim}$2 mm/day over the tropical Pacific. Annual and seasonal variations of P, E, and P-E were discussed.

• 열처리공학회지
• /
• 제18권6호
• /
• pp.375-382
• /
• 2005

This paper presents the results of experimental investigation for the effect of heat conduction on the evaporation cooling of water droplet in the process of heat treatment. The experiments are mainly focused on the surface temperature, the surface roughness and the droplet diameter at aluminum. The range of surface temperature is from $80^{\circ}C$ to $140^{\circ}C$, surface roughness is from $R_a=0.18{\mu}m$ to $R_a=1.36{\mu}m$ and droplet diameter is from 2.4 mm to 3.0 mm. The results show that the total evaporation time is shorter for the larger surface roughness, the time averaged heat flux has maximum value for the larger surface roughness and exist the critical heat flux. The total evaporation time has a big influence on the evaporation region for the smaller droplet size, but the total evaporation time has not influence on the nuclear boiling region.

• Transactions on Electrical and Electronic Materials
• /
• 제7권1호
• /
• pp.21-25
• /
• 2006

In this study, liquid crystal (LC) aligning properties for homeotropic alignment on the $SiO_x$ thin film by electron beam evaporation method with electron beam system in accordance with the evaporation angles were investigated. Also, the control of pretilt angles homeotropic aligned LC on $SiO_x$ thin film as the function of the evaporation angles were studied. The uniform vertical LC alignment on the $SiO_x$ thin film surfaces with electron beam evaporation was achieved with all of the thin film angle conditions. It is considerated that the LC alignment on the $SiO_x$ thin film by electron beam evaporation is attributed to elastic interaction between LC molecules and micro-grooves at the $SiO_x$ thin film surface created by evaporation. The values of the pretilt angles according to the evaporation angle were from about $0.7^{\circ}$ to about $3.4^{\circ}$. The highest pretilt angles of about $3.4^{\circ}$ in aligned NLC on the $SiO_x$ thin film surfaces by electron beam evaporation were measured under the condition of $45^{\circ}$. Also, good LC alignment states on the treated $SiO_x$ thin film layer by electron beam evaporation were observed at annealing temperature of $250^{\circ}C$. Consequently, the high pretilt angle and the good thermal stability of LC alignment on the $SiO_x$ thin film by electron beam evaporation can be achieved.

• 한국지반공학회논문집
• /
• 제32권5호
• /
• pp.37-48
• /
• 2016

본 연구는 실제 시공 환경에서 투수성 보도블록의 표면 유출 및 배수 특성을 알아보고자 하였으며, 표층 및 노반을 포함한 시편을 대상으로 불포화 상태에서 도심 내 우수 조건을 고려한 배수 실험을 진행하였다. 일정한 시간 간격을 두고 반복적인 배수 실험 및 공극 막힘 실험이 시행되었으며, 정량적 분석을 위하여 3D X-ray CT 이미지 분석 및 증발 실험을 시행하였다. 실험 결과, 시간 간격 동안 발생한 증발로 인해 공극 내 물이 공간적으로 재분포되어 표면 유출을 야기시키는 것으로 나타났다. 특히, 공기에 노출되어 있는 표층보다 시편 하부에 위치한 노반의 공극 변화가 투수성 보도블록의 배수, 증발 등 전체적인 수리학적 거동을 크게 저하시켰다. 또한 공극 내 침전물은 증발로 인한 변화를 증진 시키며, 이 때 저하된 배수 성능은 쉽게 회복되지 않는 것으로 나타났다. 그리고 선행우수조건에 의하여 배수 성능이 저감되면서 최대 표면 유출 높이가 증가하는 것으로 나타났다.