• 제목/요약/키워드: evaluation rule

검색결과 580건 처리시간 0.022초

ISO 기반 Moon Pool형 다이버 보트 구조 건전성 평가 (Evaluation of Structural Integrity of the ISO-based Moon Pool Type Diver Boats)

  • 강병모;오우준;나현호;최주석
    • 해양환경안전학회지
    • /
    • 제24권5호
    • /
    • pp.597-603
    • /
    • 2018
  • 본 연구는 수중 및 여가활동에 대한 수요 증가에 따른 다이버들을 위한 보트의 구조 건전성에 관한 것이다. 대상 선박은 선체 중앙부에 Moon Pool 구조를 갖추고 있는 소형 쌍동선이며, 연구수행은 ISO Rule 기반의 허용응력 산정을 통한 유한요소 해석법을 이용하여 연구를 수행하였다. 연구수행 방법은 ISO 12215-5와 TC118.1225-7에서 정의하고 있는 계수를 산정하고, 종방향굽힘 모멘트, 비틀림 모멘트, 선저슬래밍 하중 등을 적용하여 ISO 기준과 허용응력 설계법(ASD)에 의한 적합성 여부를 판정하고 유한요소해석(FEA)를 활용한 극한강도 설계법을(LFRD)를 적용하여 수행하였다. 연구결과 문풀형 구조를 가진 선박도 ISO규정, KR규정을 적용하여 설계시 구조적 건전성을 확보하는 것으로 사료된다.

Rheological Evaluation of Petroleum Jelly as a Base Material in Ointment and Cream Formulations : Linear Viscoelastic Behavior

  • Park, Eun-Kyoung;Song, Ki-Won
    • Journal of Pharmaceutical Investigation
    • /
    • 제41권3호
    • /
    • pp.161-171
    • /
    • 2011
  • The objective of the present study is to systematically characterize a linear viscoelastic behavior of petroleum jelly in small amplitude oscillatory shear flow fields correspondent to the rheological ground state. With this aim, using a strain-controlled rheometer, the dynamic viscoelastic properties of commercially available petroleum jelly have been measured at $37^{\circ}C$ (body temperature) over a wide range of angular frequencies at an extremely small strain amplitude of 0.1 %. In this article, the linear viscoelastic behavior was reported in detail and then explained from a structural view-point of petroleum jelly and discussed in depth with respect to the consumer's requirements. Main findings obtained from this study can be summarized as follows : (1) The storage modulus is always greater than the loss modulus over an entire range of angular frequencies studied, meaning that the linear viscoelastic behavior of petroleum jelly is dominated by an elastic nature rather than a viscous nature. (2) Petroleum jelly shows a desirable linear viscoelastic behavior with respect to the consumer's requirements because it is undesirable for the product to flow down from the skin at an initial stage upon contact with the human skin. (3) A fractional derivative model shows an excellent applicability to describe a linear viscoelastic behavior of petroleum jelly. However, this model should be used with a special caution because there exists no physical meaning for the model parameters. (4) A modified form of the Cox-Merz rule gives a good ability to predict the relationship between steady shear flow properties (nonlinear behavior) and dynamic viscoelastic properties (linear behavior) for petroleum jelly.

ESPI System을 이용하여 측정한 국부 변형률이 저사이클 피로수명에 미치는 영향에 관한 연구 (Effect of Local Strain on Low Cycle Fatigue using ESPI System)

  • 김경수;김기성;권정민;박성모;김범일
    • 대한조선학회논문집
    • /
    • 제43권2호
    • /
    • pp.213-219
    • /
    • 2006
  • Low cycle fatigue cracks are mainly detected at discontinuous welded locations with high stresses under repeated cyclic static loads due to cargo leading and unloading. Theoretical and analytical methods have been used for evaluation of local stress and strain which have an effect on a prediction of fatigue life, but those have difficulties of considering stress concentration at notched location and complicated material behavior of welded joint or heat affected zone. Electronic speckle pattern interferometry(ESPI) system is nondestructive and non-contact measurement system which can get the relatively accurate full field strain at critical positions such as welded zone and structural discontinuous location. In this study, local strain was measured on welded cruciform joint by ESPI system and then low cycle fatigue test was performed. Effect of local strain on low cycle fatigue life was examined by measured values using ESPI system. Moreover, experimental fatigue life was compared with established S-N curves using theoretical local strain and stress calculated by Neuber's rule.

Evaluation of constitutive relations for concrete modeling based on an incremental theory of elastic strain-hardening plasticity

  • Kral, Petr;Hradil, Petr;Kala, Jiri
    • Computers and Concrete
    • /
    • 제22권2호
    • /
    • pp.227-237
    • /
    • 2018
  • Today, the modeling of concrete as a material within finite element simulations is predominantly done through nonlinear material models of concrete. In current sophisticated computational systems, there are a number of complex concrete material models which are based on theory of plasticity, damage mechanics, linear or nonlinear fracture mechanics or combinations of those theories. These models often include very complex constitutive relations which are suitable for the modeling of practically any continuum mechanics tasks. However, the usability of these models is very often limited by their parameters, whose values must be defined for the proper realization of appropriate constitutive relations. Determination of the material parameter values is very complicated in most material models. This is mainly due to the non-physical nature of most parameters, and also the large number of them that are frequently involved. In such cases, the designer cannot make practical use of the models without having to employ the complex inverse parameter identification process. In continuum mechanics, however, there are also constitutive relations that require the definition of a relatively small number of parameters which are predominantly of a physical nature and which describe the behavior of concrete very well within a particular task. This paper presents an example of such constitutive relations which have the potential for implementation and application in finite element systems. Specifically, constitutive relations for modeling the plane stress state of concrete are presented and subsequently tested and evaluated in this paper. The relations are based on the incremental theory of elastic strain-hardening plasticity in which a non-associated flow rule is used. The calculation result for the case of concrete under uniaxial compression is compared with the experimental data for the purpose of the validation of the constitutive relations used.

AHP를 활용한 디지털 게임의 속성에 관한 연구 (Research on the Attributions of Digital Game Using AHP)

  • 권용만
    • 디지털융복합연구
    • /
    • 제14권7호
    • /
    • pp.431-437
    • /
    • 2016
  • 게임이 산업화된 1970년대 이후 게임의 정의를 통하여 그 속성을 연구하려는 노력이 계속되어 왔으며, 본 연구는 Katie Salen과 Eric Zimmerman이 통합적으로 정리한 규칙, 목표, 갈등, 활동, 의사결정, 자발성, 예술성 등 7개의 게임속성에 대하여 AHP 이론에 근거하여 그 중요도를 분석하였다, 이를 위하여 게임업계 전문가를 통한 게임 속성에 대한 쌍대비교 설문을 실시한 후 데이터를 분석하였으며, 게임이용자 등을 대상으로 하는 2차 설문을 통하여 그 결과가 분석모델과 일치함을 확인하였다. 게임속성의 중요도를 분석한 결과, 위에서 언급한 7개의 요인 중 목표(24%)의 중요도가 가장 큰 것으로 나타났으며, 예술성(16%), 자발성(15%), 규칙(13%) 등이 그 뒤를 잇고 있다. 이는 게임개발에 있어서 게임 이용자가 수행해야할 목표를 분명히 제시하는 것과 아울러 이펙트 등의 영상효과를 크게 고려해야 함을 암시하는 것으로, 본 연구는 게임 개발에 있어서 우선적으로 고려할 속성이 무엇이며 그 중요도는 얼마나 되는가를 체계적으로 규명하였다.

1924세대용 브래지어 원형개발 및 그레이딩에 관한 연구 (A Study on the Development of the Basic Brassiere Pattern and a Grading Method for the 1924 Generation)

  • 오송윤;최혜선
    • 한국의류학회지
    • /
    • 제31권4호
    • /
    • pp.633-645
    • /
    • 2007
  • The purpose of this study is to develop brassiere patterns which are both fitting and functional for women aged 19 to 24(the 1924 generation). We suggested a 'size chart for body measurements' for constructing basic brassiere patterns with six sizes of '70, 75', 'AA, A, B cups', which are used most frequently by the 1924 generation consumers. The scope of research was in reference to the statistical analysis results of the Size Korea(2004) body measurements and the results of the data from the preceding research. The 'drafting method for constructing basic brassiere patterns for the 1924 generation consumers' was completed by selecting a total of 18 subjects, 3 for each six sizes in the scope of research, and three wearing tests were carried out with the subjects. We compiled one brassiere pattern in six sizes obtained with the drafting method of constructing a basic brassiere pattern on another by block pattern in order to observe the phase of change in dimensions and shapes of paper pattern. The result was converted into the variations of a x-axis and a y-axis, and we suggested 'Size Grading Rule' and 'Cup Grading Rule' for the basic brassiere patterns. As the results of the wearing evaluation of the basic brassieres and measuring the variation in body dimensions by wearing brassieres, the dimensions and shapes of the basic brassieres suggested in this research proved to be fitting and to have a wearing effect that brings together and supports the breasts.

사용자 구분에 의한 지역적 연관규칙의 유도 (Deriving Local Association Rules by User Segmentation)

  • 박세일;이수원
    • 한국정보과학회논문지:소프트웨어및응용
    • /
    • 제29권1_2호
    • /
    • pp.53-64
    • /
    • 2002
  • 연관규칙 탐사기법은 트랜잭션들을 대상으로 항목간 또는 속성간의 연관관계를 발견하는 방법으로, 데이터 집합의 구조를 쉽게 통찰할 수 있다는 장점으로 인하여 활발히 연구되어 왔다. 그러나 현재까지의 연구들은 전체 사용자 중 공통적인 특성을 지닌 사용자 그룹이 존재할 경우, 이러한 그룹별 연관규칙을 찾아낼 수 없다는 한계점을 지닌다. 본 논문에서는 이러한 점을 해결하기 위하여, 속성선택 및 사용자 구분 기법을 이용하여 사용자를 부분집합으로 구분하고 그 부분집합별로 연관규칙을 발견한다. 또한 위와 같이 얻어진 지역적 연관규칙이 전체 사용자를 대상으로 한 전역적 연관규칙보다 해당 부분집합에 더욱 적합하다는 사실을 여러 연관규칙 평가치를 이용하여 평가한다.

다차원 데이터 큐브 모델을 이용한 구제역의 위기 대응 방안 분석 (Crisis Management Analysis of Foot-and-Mouth Disease Using Multi-dimensional Data Cube)

  • 노병준;이종욱;박대희;정용화
    • 한국콘텐츠학회논문지
    • /
    • 제17권5호
    • /
    • pp.565-573
    • /
    • 2017
  • 재난 재해 발생 시, 정부의 위기 대응방식에 대한 사후 평가는 향후 유사한 위기 상황이 발생할 경우를 대비하고 국가의 장기적인 위기관리의 초석이 되는 필수적인 단계이다. 본 논문에서는 국내에서 발생한 구제역에 관하여 정부에서 어떠한 대응 전략을 펼쳤는지를 언론에 보도된 기사 내용을 통해 분석한 연구로써, 먼저 온라인 뉴스 기사로부터 구제역에 관한 키워드들을 추출하여 데이터 큐브를 구성한 후, OLAP 연산과 연관규칙 분석을 수행함으로써 시간 축에 따른 정부의 위기상황 대응행동 및 그에 따른 사회적 파급 효과들을 분석한다. 구제역이 가장 심각했던 2010년 11월부터 2011년 12월까지 국내에서 발생한 구제역에 관한 정부의 위기 상황 대응 방법을 사례분석을 통해 분석하였다.

연관성 규칙의 탐색을 위한 순수 대칭적 J 측도의 활용 (Utilizing Purely Symmetric J Measure for Association Rules)

  • 박희창
    • Journal of the Korean Data Analysis Society
    • /
    • 제20권6호
    • /
    • pp.2865-2872
    • /
    • 2018
  • 데이터 마이닝 분야에서 개발된 기법에는 연관성 규칙, 군집분석, 의사결정나무, 신경망 등 여러 가지가 있는데 이들 중에서 연관성 규칙은 지지도, 신뢰도, 그리고 향상도 등 여러 가지 연관성 평가 기준을 이용하여 항목들 간에 특정한 연관성을 탐색하는 기법이다(Park, 2014). 이러한 연관성 규칙은 Agrawal et al.(1993)이 처음 제안하였으며, 그 이후로 여러 연구자들에 의해 연구가 진행되고 있으며, 최근에는 교차 엔트로피와 관련된 연구들이 발표되고 있다(Park, 2016b). 본 논문에서는 기존에 발표된 J 측도에 방향성과 순수성을 고려한 순수 대칭적 J 측도를 제안하고 예제를 활용하여 그 유용성에 대해 알아보았다. 그 결과, 동시발생빈도가 증가함에 따라 순수 대칭적 J 측도가 기존의 J 측도와 대칭적 J 측도, 순수 교차 엔트로피 측도보다 훨씬 분명하게 변하는 것을 알 수 있었으며, 불일치빈도의 크기에 따라서도 순수 대칭적 J 측도가 변화하는 폭이 더 커짐에 따라 연관성 유무를 더 분명하게 파악할 수 있었다. 따라서 순수 대칭적 J 측도는 데이터가 존재하는 어느 분야에서든지 연관성 규칙의 평가에 적용이 가능할 것으로 생각된다.

회귀 매니폴드 3-D PCA 기반 새로운 이미지 분석 방법 (A New Image Analysis Method based on Regression Manifold 3-D PCA)

  • 이경민;인치호
    • 한국인터넷방송통신학회논문지
    • /
    • 제22권2호
    • /
    • pp.103-108
    • /
    • 2022
  • 본 논문에서는 회귀 매니폴드 3-D PCA 기반 새로운 이미지 분석 방법을 제안한다. 제안된 방법은 대용량 이미지 데이터 입력 시 효율적인 차원 축소를 위해 개선된 매니폴드 3-D PCA와 PCA의 비선형 확장이 가능한 오토인코더를 기반으로 설계된 구조로 회귀분석 알고리즘으로 구성된 새로운 이미지 분석 방법이다. 오토인코더의 구성으로는 이미지 픽셀 값을 3차원 회전을 통한 최전의 초평면을 도출하는 회귀 매니폴드 3-D PCA와 딥러닝 구조와 유사한 Bayesian Rule 구조를 적용한다. 성능 검증을 위해 실험을 수행한다. 미세먼지 이미지를 활용하여 이미지를 향상되며, 이를 분류 모델을 통한 정확도 성능 평가를 수행한다. 그 결과 딥러닝 성능에 유효함을 확인할 수 있다.