• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.113-121
• /
• 2013

The road icing forecast and snow detection system using state evaluation algorithm of multi sensor optimizes snow melting system to control spread time and amount of chemical spread application This system operates integrated of contact/non-contact sensor and infrared camera. The state evaluation algorithm of the system evaluates road freezing danger condition and snowfall condition (snowfall intensity also) using acquired data such as temperature/humidity, moisture detection and result of image signal processing from field video footage. In the field experiment, it proved excellent and reliable evaluated result of snowfall state detection rate of 89% and wet state detection rate of 94%.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.3 no.1
• /
• pp.33-49
• /
• 1997

One of the most important missons that are imposed on merchant ship at sea is to accomplish the safe transportation of cargo loaded. Recently, a study on the seakeeping performance has been carried out on the development of evaluation system related to the synthetic safety of a ship at sea. The seakeeping performance is the ship's ability sailing at, and executing its misson against adverse environmental factors successfully and safely. Until now, however, there has not been any method of quantitative evaluation on the dynamic safety of the ship's cargo loaded. In this regards, this paper has introduced the evaluation method of dynamic safety of the ship's cargo. In order to evaluate the dynamic safety of cargo, the vertical and lateral acceleration which causes the collapse, racking and local structure failure of cargo was adopted as the evaluation factors in the ship's motions. The response amplitude of ship's motions in regular waves is manipulated by NSM (New Strip Method) on a given 2,700 TEU full container vessel under the wind forces of 7, 8 and 9 Beaufort scale. Each response of ship's motions induced by NSM was applied to short-crested irregular waves for stochastic process on evaluation factors and then vertical and lateral acceleration of each cargo was compared with significant amplitude of each acceleration. A representative dangerous factor was determined by comparing permissible values of stacking and racking forces occurred typically to the vertical and transverse directions with the container strength required on ISO 1496 at the positions of forecastle, poop and ship's midship respectively. Through the occurrence probability of the determined factor by Rayleigh's probability density function, the dangerousness which limits loads on container's side wall as an evaluation was applied in judging of the danger of the ship's cargo loaded.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.103-105
• /
• 2016

Shin(2015) etc. published use of smart phones on the effect the use of smart phones released in the ship duty performed by survey of using smart phones Status and Usage in previous studies, soon as the survey provided this environment(36% on sailing) where you can use your smart phone from the ship, at the risk of officers using survey questionnaires were analyzed smart phones that use about twice the risk than before. In this study, maritime those who have experienced a period of sailors aboard a diagnostic test subjects Ship Handling Simulation analysis evaluation item of Maritime Traffic Admit, Proximity evaluation of a ship evaluation, by measuring the degree of danger that the subjective evaluation and control of the ship evaluation to evaluate the risk on navigation safety. Also indicated the risk of a smart phone quantitatively by measuring the time that the awareness of dangerous situation depending on using smart phone or not.

• Journal of the Korea Institute of Construction Safety
• /
• v.4 no.1
• /
• pp.9-15
• /
• 2021

Recently, buildings have become larger, more complex, and various construction methods have been tried. As a result, the use of construction equipment continues to increase, as well as safety accidents. According to the Ministry of Employment and Labor's report on industrial accidents, the rate of deaths caused by construction equipment among construction accidents has been increasing steadily since 2009. In the safety field of other industries such as crime and traffic, research has been continuously conducted to develop quantitative indicators due to demands for development of evaluation indicators or risk index development. On the other hand, construction equipment has been studied to analyze disaster cases and come up with improvement measures, but there is no research related to risk index. Therefore, the research will develop a quantitative index that can determine the risk level of construction equipment in the field based on the accident case and verify the possibility of use in the field.

• Toxicological Research
• /
• v.28 no.3
• /
• pp.143-149
• /
• 2012

To prepare measures for practical policy utilization and the control of heavy metals, hazard control related institutions by country, present states of control by country, and present states of control by heavy metals were examined. Hazard control cases by heavy metals in various countries were compared and analyzed. In certain countries (e.g., the U.S., the U.K., and Japan), hazardous substances found in foods (e.g., arsenic, lead, cadmium, and mercury) are controlled. In addition, the Joint FAO/WHO Expert Committee on Food Additives (JECFA) recommends calculating the provisional tolerable weekly intake (PTWI) of individual heavy metals instead of the acceptable daily intake (ADI) to compare their pollution levels considering their toxicity accumulated in the human body. In Korea, exposure assessments have been conducted, and in other countries, hazardous substances are controlled by various governing bodies. As such, in Korea and other countries, diverse food heavy metal monitoring and human body exposure assessments are conducted, and reducing measures are prepared accordingly. To reduce the danger of hazardous substances, many countries provide leaflets and guidelines, develop hazardous heavy metal intake recommendations, and take necessary actions. Hazard control case analyses can assist in securing consumer safety by establishing systematic and reliable hazard control methods.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1236-1251
• /
• 2015

This study examined understanding and attitude of sustainable development(SD) of 38 college students in a nuclear power plant construction after education for sustainable development(ESD) through panel discussion. The results were as follows: First, after lesson 66% of students were expected that SD is possible if scientific technology is developed and a frugal life for the protection of environment is carried out. However, the remaining students regarded SD as an ideal concept, because they thought it is not possible to pursue environmental sustainability and socio-economic development simultaneously. Second, students' opinions in the evaluation of constructing a nuclear power plant in three aspects(environment, society and economy) before and after panel discussion were changed as follows; 1) After panel discussion, the objectors increased to 21% in economic evaluation, while the supporters increased to 11% in environmental evaluation. 2) Students majoring in engineering or natural sciences changed their opinions to agree in environmental evaluation because they considered a nuclear power plant safe and eco-energy. However students majoring in social science/business or liberal arts/arts changed their opinions to disagree in economic evaluation because they considered a nuclear power plant as high-cost energy when assessing danger-accidents cost, public consensus cost, operation and maintenance cost, and waste disposal cost. 3) This change of decision-making in students majoring in social science/business or liberal arts/arts after panel discussion was statistically significant(p<0.05). Implications of panel discussion as a teaching and learning method in ESD are also discussed.

• The Journal of the Korea Contents Association
• /
• v.15 no.8
• /
• pp.532-543
• /
• 2015

Damage of national infrastructures not only endangers the structural safety, but also has a direct and indirect influence on national economy and society. Since the influence of damage has been enhanced in the metropolitan areas, the infrastructures in danger should be identified and managed under disaster situations. This study suggests the importance factors for national infrastructures, calculates weights for the factors through AHP analysis, and develops the importance evaluation system for national infrastructures. The evaluation system provides the priority of infrastructures for local governments and facility managers and enables management based on the degree of importance in emergency situations. After disasters, the evaluation system will support a systematic decision-making for recovery priorities with a limited budget.

• Journal of information and communication convergence engineering
• /
• v.7 no.1
• /
• pp.7-12
• /
• 2009

The advanced computer network and Internet technology enables connectivity of computers through an open network environment. Despite the growing numbers of security threats to networks, most intrusion detection identifies security attacks mainly by detecting misuse using a set of rules based on past hacking patterns. This pattern matching has a high rate of false positives and can not detect new hacking patterns, making it vulnerable to previously unidentified attack patterns and variations in attack and increasing false negatives. Intrusion detection and prevention technologies are thus required. We proposed a network based hybrid Probe Intrusion Detection model using Fuzzy cognitive maps (PIDuF) that detects intrusion by DoS (DDoS and PDoS) attack detection using packet analysis. A DoS attack typically appears as a probe and SYN flooding attack. SYN flooding using FCM model captures and analyzes packet information to detect SYN flooding attacks. Using the result of decision module analysis, which used FCM, the decision module measures the degree of danger of the DoS and trains the response module to deal with attacks. For the performance evaluation, the "IDS Evaluation Data Set" created by MIT was used. From the simulation we obtained the max-average true positive rate of 97.064% and the max-average false negative rate of 2.936%. The true positive error rate of the PIDuF is similar to that of Bernhard's true positive error rate.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.110-113
• /
• 1994

In the hazardous areas where explosive substances in the form of gases, vapor or mists exist, electrical apparatus and installations must be of explosion-proof construction to prevent or limit the danger of the ignition of potentially explosive atmosphere. In Korea, six types of protection have been specified in the government regulations at present: flameproof enclosure, pressurization, oil immersion, increased safety, intrinsic safety, and special types. If electrical apparatus are made of explosion-proof construction in a way other than five above-mentioned types, and their performance is tested and approved by the reponsible authorities, they may be categorized as special type apparatus. In this paper, we introduced a special type of explosion-proof electrical apparatus, called non-incendive type, and presented its constructional requirements. We also investigated evaluation methods of non-incendive type apparatus to assure the explosion-proof performance, and proposed a new classification method of hazardous areas using probabilistic concept.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.361-364
• /
• 2005

Some bogie frames manufactured in 1999, 2000 year have the fatal problem. Three or four years later, the cracked end beam among them have discovered in 2002, 2003 year. The crack situation of the end beam have a bad effect on brake system. In that case, the cars would be in danger of derailment. To improve the end beam, a research of covering the whole field of welded type bogie frame was started. Main line real tests were performed at Young-Dong line. The stress of main positions for bogie frame was measured. Also up-down direction and left-right direction vibration acceleration of the bogie frame were measured. At this time the tests were performed for the three types bogie. The test result concludes that the crack cause of the end beam is not brake load but vibration at running mainly. It is estimated that the life of the improved car which end beam reinforced is safe within the car permitted life(25 years). The improvement methods of the end beam are presented by construction modification, parts modification. The integrity evaluation is inspected by analysis the real line test results, the improvement methods of the end beam.