• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.291-296
• /
• 2007

This study presents the evaluation process for door module. Its objective evades the resonance generated at module plate due to the operation of window regulator motor. For this study, the design improvement process is composed of experimental methods having three steps. First step is modal analysis at door assembly status for acquisition of dynamic characteristics which are modal frequency and damping. Second step is a vibration experiment to get the test mode considered an efficiency of window regulator motor. Last step is a vibration measurement by the form of $6{\times}6$ array on module plate. A vibration measurement of 6x6 array form can be got to three analysis results which are a transfer path of vibration using cross correlation function, a vibration map using OA level and a contribution by frequency band using coherent output power spectrum on module plate. These results are applied to SDM(structural dynamic modification) for design improvement to get around the resonance on module plate by the excitation of window regulator motor.

• Journal of the Korean Society for Precision Engineering
• /
• 제22권6호
• /
• pp.144-151
• /
• 2005

Spin coater is regarded as a major module rotating at high speed to be used build up polymer resin thin film layer fur bonding process of GaAs wafer. This module is consisted of spin unit for spreading uniformly, align device, resin spreading nozzle and et. al. Specially, spin unit which is a component of module can cause to vibrate and finally affect to the uniformity of polymer resin film layer. For the stability prediction of rotation velocity and uniformity of polymer resin film layer, it is very important to understand the dynamic characteristics of assembled spin coater module and the dynamic response mode resulted from rotation behavior of spin chuck. In this paper, stress concentration mode and the deformed shape of spin chuck generated due to angular acceleration process are presented using analytical method for evaluation of structural safety according to the revolution speed variation of spin unit. And also, deformation form of GaAs wafer due to dynamic behavior of spin chuck is presented fur the comparison of former simulated results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.918-923
• /
• 2007

Currently, automotive industries improve the vehicle performance and reduce the development period of vehicle using each module part for the high quality and performance of vehicles. However each component part doesn't generate the noise and vibration problems, sometime these problems are generated on the assembly status between vehicle chassis frame and each module part. On this study, in order to analysis the dynamic characteristics of a shield door module that is a typical module part of vehicles, the acquisition and evaluation process about the vibration and noise of shield door module is developed. Also the possibility to apply to shield door module of the developed process is verified by the comparison with the dynamic characteristics between plastic and steel module plate.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• 제32A권10호
• /
• pp.93-101
• /
• 1995

The evaluation of the logic capability and the library generation method of the multiplexor-based logic module is described. Optimizing logic module for silicon area and logic capability is essential to build a efficient FPGAs(Field-Programmable Gate Arrays). Because the multiplexor-based logic module can implement a large number of functions, it presents difficulties for library-based approaches. However, the logic functions of the logic module can be significantly reduced by lmiting the number of variables and sum-of-products and by removing same functions with different variable ordering using algorithm presented in this paper.

• Journal of Acupuncture Research
• /
• 제30권3호
• /
• pp.27-38
• /
• 2013

Objectives : This study was designed to evaluate patient satisfaction of Korean medicine therapy using treatment tool by psychological type. Methods : 48 subjects were participated in this study. Before a treatment, we analyzed a patient's phychological type first by using a questionnaire. And then we divided 3 groups which were called a rational sympathy module group, emotional sympathy module group, control group. Manner of medical consultation according to patient's phychological type was carried out in all groups. After all treatment, we conducted a survey about medical service perception index, patient happiness index, medical satisfaction index. To evaluate a satisfaction degree, we analyzed results of survey statistically. Results : The results of the analysis, both rational sympathy module group and emotional sympathy module group got a higher score than control group statistical significantly on medical service perception index. Emotional sympathy module group got a higher score than control group statistical significantly on patient happiness index and medical satisfaction index. But rational sympathy module group only had a higher tendency than control group on patient happiness index and medical satisfaction index. Emotional sympathy module group got a higher score than rational sympathy module group on medical service perception index, patient happiness index and medical satisfaction index. Conclusions : Korean medicine therapy using treatment tool by psychological type consisted of patient's phychological type questionnaire and manner of medical consultation could improve a patient's satisfaction. It was more effective in emotional sympathy module group than rational sympathy module group.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.671-672
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.501-502
• /
• 2010

• Current Photovoltaic Research
• /
• 제6권2호
• /
• pp.39-42
• /
• 2018

When the PV module is illuminated in a high temperature region, solar cells are also exposed to the high temperature external environment. The operating temperature of the solar cell inside the module is increased, which causes the power drops. Various efforts have been made to reduce the operating temperature and compensate the power of solar cells according to the outdoor temperature such as installing of a cooling system. Researches have been also reported to lower the operating temperature of solar cells by improving the heat dissipation properties of the backsheet. In this study, we conducted a test to measure the internal temperature of each module components and the external temperature when the light was irradiated according to the surrounding temperature. Backsheets with different thermal conductivities were compared in the test. Finally, in order to explain the temperature difference between the solar cell and the outside of the module, we proposed an evaluation method of the heat transfer characteristics of photovoltaic modules with different backsheet.

• Journal of the Korean Society for Precision Engineering
• /
• 제17권8호
• /
• pp.140-150
• /
• 2000

In this paper module of a product is determined by the characteristics of a product itself and process. To analyze the characteristics of the product information on subassemblies and parts can be obtained by analyzing the existing product. Based on the analysis of characteristics of product structure and function determination rules of a module degree could be proposed for assembly and disassembly process and product structure and function. By applying these rules of a module, module of a product is classified into full half and non-module depending on the module degree of a product. As a result of module degree analysis simpler assembly process and reduced structural interference can be realized. For the product function simpler updated and multi function can be also achieved.

• Architectural research
• /
• 제17권2호
• /
• pp.75-81
• /
• 2015

Insulation and condensation performance evaluation (I&CPE) is an important energy analysis. While considerable amount of data are already represented in a Building Information Model (BIM), the lack of interoperability between BIM modeling and I&CPE programs prevents the simulation process from being efficient and accurate. This study proposes a prototype of a BIM-based I&CPE simulation program, in order to enhance the interoperability between BIM modeling and I&CPE programs. This study discusses the information flow process, defines the required information and its level of detail, develops standardized libraries, and finally proposes a prototype that consists of a data extraction module, conversion module, and performance module. The assurance of interoperability between systems might greatly benefit architects and energy professionals.