• 한국보육지원학회지
• /
• 제11권2호
• /
• pp.21-37
• /
• 2015

본 연구의 목적은 유아대상 한글학습용 애플리케이션의 내용을 전통적 언어교육에서 사용하는 언어 교수방법인 발음중심 교수방법과 총체적 교수방법으로 분류하여 비교분석함으로써 학습용 애플리케이션 내용 개선을 위한 시사점을 찾는 데에 있다. 이를 위해, 선행연구에서 사용된 유아용 애플리케이션 평가 척도에서 학습내용과 관련된 4개 하위영역을 선택하여 이를 수정, 보완하여 총 51개 애플리케이션을 대상으로 분석을 실시하였다. 그 결과, 총체적 교수방법의 애플리케이션이 발음중심 교수방법의 애플리케이션보다 인터랙션을 잘 활용하는 것으로 드러났다. 또한, 총체적 교수방법의 애플리케이션은 교육의도에 적합한 그래픽의 사용, 매력적인 캐릭터 및 피드백을 통한 능동적 학습활동 유도에서 발음중심 교수방법의 애플리케이션을 앞섰다. 이 연구결과는 효율적인 한글학습을 위한 양질의 애플리케이션 개발을 위한 기초자료로 활용될 수 있다.

• Archives of Plastic Surgery
• /
• 제35권3호
• /
• pp.243-247
• /
• 2008

Purpose: For a proper wound care, the correct evaluation of wound is very important. Usually the evaluation of wound was subjective, and as a result, wound care was empirical. There were many attempts to objectify the wound evaluation, and one of them was measurement of the wound pH. The purpose of this study is to observe the wound pH changes during wound healing phase. Methods: From 2005 to 2007, we measured the pH values of 6 acute wounds, which were split thickness skin graft donor sites. In addition, we measured the pH values of 18 chronic wounds, which were 17 pressure sores and 1 tuberculosis ulcer. After pH meter ($SkinCheck1^{(R)}$, Hanna Instruments, Italy) was calibrated, wound pH was checked. Wound was cleansed with saline gauze and dressed with polyurethane foam dressing($Medifoam^{(R)}$, Biopol, Korea). Results: In split thickness skin graft donor sites, the pH raised(mean pH value: $7.45{\rightarrow}7.62$) when the wound was on the process of healing(*p=0.027, analysis of Wilcoxon signed-rank test). If wound became re-epithelialised, the pH value dropped to that of normal skin. However, we could not find a relation between time and the pH values in chronic wound. Conclusion: We could observe the consistent wound pH changes during wound healing phase in acute wound.

• 한국과학교육학회지
• /
• 제20권2호
• /
• pp.200-213
• /
• 2000

교육부의 제6차 교육 과정 개편과 더불어 모든 고등 학교의 필수 교과로 도입된 공통 과학이 현재 고등 학교에서 어떻게 운영되고 있는가를 조사해 본 연구이다. 그 결과 3.2%의 학교에서만이 교사 1인이 담당하고 있었고 나머지 대부분의 학교에서는 담당 과학 교사의 전공별로 각 단원을 분담하여 가르치고 있었다. 이 경우 각 단원에 통합 과학적인 요소들이 많아서 애로가 많음을 토로하고 있었으며, 시간표상에 배치된 공통 과학이 다른 학과목과 같이 편성되어 있기 때문에 하나의 학습 주제를 해결하기엔 시간이 너무 짧다는 의견들이 많았다. 또한 공통 과학을 위한 전문 실험실이 없고 담당 학생수가 너무 많아서 고민하고 있었다. 또한 공통 과학의 지식 편은 강의식 학습으로, 탐구 편은 탐구 학습으로 운영하고 있었으며, 평가는 지식편인 경우, 객관식 또는 주관식 질문지법을 이용하여 평가하였으며. 탐구편인 경우, 학생들의 보고서를 중심으로 평가하고 있었다. 공통 과학에 대한 학생들의 반응은 보통을 넘지 못하고 있어서 과학에 대한 흥미 도를 고조시키기 위하여 도입된 본래의 의도에서 빗나가고 있음을 나타내고 있었다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권9호
• /
• pp.4341-4347
• /
• 2016

Background: Patient safety is one of the key components of nursing care for cancer cases. Valid and reliable context-based instruments are necessary for accurate evaluation of patient safety in oncology units. The aim of the present study was to develop and evaluate the psychometric properties of the Patient Safety Violation Scale in medical oncology units in Iran. Materials and Methods: In this methodological study, a pool of 58 items was generated through reviewing the existing literature. The validity of the 58-item scale was assessed through calculating impact score, content validity ratio, and content validity index for its items as well as conducting exploratory factor analysis. The reliability of the scale was evaluated by assessing its internal consistency and testretest stability. Study sample consisted of 300 oncology nurses who were recruited from thirteen teaching hospitals affiliated to Tehran University of Medical Sciences, Tehran, Iran. Results: Sixteen items were excluded from the scale due to having low impact scores, content validity ratios, or content validity indices. In exploratory factor analysis, the remaining 42 items were loaded on five factors including patient fall, verification of patientidentity, harm during care delivery, delay in care delivery, and medication errors. These five factors explained 62% of the total variance. The Cronbach's alpha of the scale and the test-retest interclass correlation coefficient were equal to 0.933 and 0.92, respectively. Conclusions: The 42-item Patient Safety Violation Scale is a simple and short scale which has acceptable validity and reliability. Consequently, it can be used for assessing patient safety in clinical settings such as medical oncology units and for research projects.

• Safety and Health at Work
• /
• 제15권2호
• /
• pp.213-219
• /
• 2024

Background: The design, implementation, and evaluation are three important stages of occupational safety and health (OSH) interventions. Historically, there has been a tendency to prioritize implementation, often neglecting detailed design and rigorous outcome evaluation. Currently, much has changed, and contemporary approaches recognize the interdependence of these stages, considering them integral to the success of any intervention. This work presents a comprehensive procedure for implementing interventions, not only to ensure short-term effectiveness but also their long-term sustainability through continuous monitoring. The focus is on a national OSH project introducing a near-miss management system (NMS) in Italy. Methods: Initial meetings were convened among project partners, complemented by interviews with diverse stakeholders, to plan implementation steps and test the NMS. Tailored questionnaires were designed for diverse stakeholder groups - initial promoters, company managers and employers, and employees - facilitating targeted implementation, and three case studies were started in Italian regions to assess the structured implementation, involving intervention promoters and collaborating companies. Results: The primary outcome is the development of practical tools, specifically three questionnaires, which are considered valuable for establishing an effective human-centered implementation strategy, meticulously designed to facilitate ongoing monitoring of processes and continual enhancement of instruments intended for NMS integration within companies. Conclusions: This work lays the foundation for successful NMS implementation in Italy and, although the outlined procedure had specific objectives, it also provides valuable insights applicable in enhancing the effectiveness and sustainability of interventions across diverse contexts. It underscores the importance of comprehensive planning, stakeholder engagement, and continuous evaluation in achieving lasting OSH interventions.

• 한국표면공학회지
• /
• 제1권1호
• /
• pp.5-13
• /
• 1967

Up to this date, numerous methods of analysis of electropling solutions are published. Some, however, need lots of works before reaching final results, or require high technique and special instruments, and also some are unaccurate due to unclearnes of end point. Like our undevelop countries, technicians of electroplating shops are most high school graduates or under, and have not much knowledge on chemistry. Furthermore, those technicians have to control their plating solutions by themselves without having enough analytical laboratory equipment . Therefore, in this paper the simplest, besides accurate method is investigated after comparing numerous methods published. Among the methods of copper determinations from acid and alkaline copper plating baths, EDTA titration method are chosen, due to these methods are the simpest and fastest for the evaluation of metal content, without requirng any special instrument. For acid copper solutions, chelate titrations were accurate enough. Since the end point of titration of chelate method is variable according to the kind of indicators and other metal's coexisitence as well as solution component, many difficulties were encountered from cyanide copper, on the contrary of acid copper bath. PAN , PV, and MX indicators were tried , but it is found that MX is the best. In chyanide solution ,due to cyanide is the masking reagent , elimination of this component is essential , and finally found that elimination CN-by precipitation with AgNO$_3$ solution was the simplest and the most accurate way among others. This method was very accurate for the new plating solutions even coexistence with organic brightners. However used solutions for long months running have to be predetermined the accurate copper value by thiosulfate method form time to time, before chelate titration by means of AgNO$_3$ precipitation. Always some constant deviations will be seen according to the solutions nature. Therefore those deviation values have to be compensated each time.

• 한국표면공학회지
• /
• 제16권4호
• /
• pp.199-214
• /
• 1983

Up to this date, numerous methods of analysis of electroplating solutions are published. Some, however, need lots of works before reaching final results, or require high technique and special instruments, and also some are unaccurate due to unclearnes of end point. Like our undevelope countries, technicians of electoplating shops are most high school gradutes or under, and have not much knowledge on chemistry. Furthermore, those technicians have to control their plating solutions by themselves without having enough analytical laboratory equiIJment. Therefore, in this paper the simplest, besides accurate method is investigated after comparing nu.merous methods published. Among the methods of 'copper determinations from acid and alkaline copper plating baths, EDT A titration method are chosen, due to these methods are the simplest and fastest for the evaluation of metal content, without requiring any special instrument. For acid copper solutions, chelate titrations were accurate enough. Since the end point of titration of chelate method is variable according to the kind of .indicators androther metal's coexsistence as well as solution comIJonent, many difficulties were encountered from cyanide' copper, on the contrary of acid copper bath. PAN, PV, and MX indicators were tried, but it is found that MX is the best. In cyanide solution, due to cyanide is the masking reagent, elimination of this component is essential, and finally found that elimination eN- by precipitation with AgN03 solution was the simplest and the most accurate way among others. This method was very accurate for the new plating solutions even coexistence with organic brightners. However used solutions for long months running have to be predetermined the accurate copper value by thiosulfate method from time to time, before chelate titration by means of AgN03 precipitation. Always some constant deviatioJ;ls will be seen according to the solutions nature. Therefore those deviation values have to be compensated each time.

• 한국작물학회지
• /
• 제58권3호
• /
• pp.301-307
• /
• 2013

연구용 NIR 장비에서 수집된 벼 생엽의 질소 함량 검량식 및 데이터베이스를 현장용 NIR 장비에 검량식을 이설, 검증함으로서 현장 적용 가능성을 평가하기 위해 수행한 결과는 다음과 같다. 1. 2003년부터 2009년까지 스펙트럼을 수집한 시료 중 선발 된 A 데이터 세트(개체수 454점)의 총 질소범위는 2.041%~4.933%, 2012년 수집된 B 데이터 세트(258점)는 2.180%~3.690%이며 각각의 전체 평균은 3.497%, 2.712%였다. 2. A, B 데이터 세트에서 유도된 검량식 결과 결정계수($R^2$)는 각각 0.845, 0.777,표준오차(SEC)는 0.196, 0.126, SECV는 0.238, 0.150이었다. 3. 연구용 NIR 장비 400 nm~2500 nm 파장에서 얻어진 데이터베이스를 현장용 NIR 장비 1200 nm~2400 nm 파장에 맞게 잘라 이설한 후 2012년 데이터베이스에 업데이트 확장한 후 작성된 검량식 결과 결정계수($R^2$)는 0.880, 표준오차(SEC)는 0.191이었다. 4. 연구용 NIR 장비에 구축된 데이터베이스를 현장용 NIR 장비에 맞춰 데이터베이스를 확장 업데이트하고 검량식을 이설한 결과 연구용 장비와의 표준오차는 0.005%로 거의 동일한 수준의 결과를 얻었다.

• 한국축산시설환경학회지
• /
• 제18권sup호
• /
• pp.81-90
• /
• 2012

본 연구는 종래의 실험실 및 연구용 근적외선 분광분석기를 보급형 현장용 다수의 장비를 이용하여 신속하게 현장에서 조사료의 품질 평가의 예측 정확성을 평가하기 위하여 3년간 전국에서 수집된 이탈리안 라이그라스 사일리지 241점을 이용하여 연구용 장비 Unity Model 2500X에 구축된 Database를 활용하여 현장용 보급형 장비 Unity Model 1400에 맞춰 Database를 업데이트 하고 검량선을 작성 한 후 검량선 이설 알고리즘을 사용하여 검량선 이설결과 연연구용 장비와 거의 동일한 수준의 결과로 0.000%~0.343%로의 차이로서 현장에서 신속하게 NDF, ADF 및 조단백, 조회분등의 화학적 성분 및 수분, pH 젖산의 발효품질, 그리고 TDN, RFV의 조사료 품질 평가치를 실험실 수준과 같이 5분내에 동시에 분석 할수 있는 결과를 얻었다. 하지만 3년 동안 얻어진 검량선 작성용 시료는 유기적인 시료이므로 지역적 년도별 차이를 가져올 수 있다. 이는 향후 모집단에 의한 지속적인 검량식의 업데이트 및 Database 관리기법이 실험실 분석 및 이를 이용 검량식을 유지 관리 할수 있는 중앙 Control Center 의해서 관리되어져야 지속적인 현장분석이 가능하다는 것을 강력히 시사한다. 현장분석기라 하더라도 조사료 같은 농산물은 계속 변화하는 성질을 가지고 있으므로 현장분석시 변위를 쉽게 파악하여 이를 신속히 보강 하지 않으면 장기적인 분석이 되지 않는다. 그동안 여러 근적외선 분광법의 연구들이 이루어져 왔지만 현장에서 직접 사용할 수 없었을 뿐 아니라 지속성의 결여로 장비들이 잘 활용되지 않고 있었다. 조사료 같은 농산물 등은 단기적으로 맞지만 불과 1년 정도가 지나면 분석결과가 상당히 신뢰성이 결여되어 활용도가 떨어지는 현실이다. 결론적으로 조사료의 향후 계속적인 시료의 보강과 모집단 분석을 이용한 체계적인 관리 및 시료의 확충방식을 직관적으로 할 수 있는 GD(Global Distance) 및 ND(Neighbour Distance) 기법의 신호등 방식으로 손쉬운 한글화된 운영체재를 사용하게 된다면 향후 효과적인 분석을 수행할 수 있어 이에 대한 여러 기대효과가 예상되어진다. 마지막으로는 동일 목적으로 다수의 장비를 운영할 경우 장비마다 동일한 시료가 동일한 결과가 나올 수 있도록 하는 기법 및 손쉽게 검량식을 작성 할 수 있는 프로그램과 작성된 검량식을 장비에 직접 기존의 컴퓨터 Network에 연결 전송하고 관리하는 Network 기능이 필수적이라 할 수 있겠다.

• 대한한의학회지
• /
• 제25권4호
• /
• pp.139-146
• /
• 2004

Objective : While the demand for herbal medicine has increased continuously, scientific data attesting to pharmacological activity are still insufficient. One important reason, especially in child patients, is the shortage of standardized instruments for clinical research. This study was designed to develop a scale to assess the effect of herbal medicine in children. Methods : The authors chose Gami-jiwhangtang (GJT) as a standard formulation and developed a scale, Bahn's Drug Evaluation Scale (BaDES), for this experiment. Forty-two healthy children, 7 and 8 years old, living in Seoul, Korea, volunteered to use GJT. The experimental group received GJT for 6 weeks, whereas the control group received no medicine. The children's mothers in both groups completed the BaDES on the sixth and twelfth week after GJT was commenced. Results : The experimental group showed a significant improvement in overall physical condition and gastrointestinal function as compared with the control group. Conclusion : These results suggest that BaDES may be a useful assessment tool for measuring the effect of herbal medicine.