• Journal of the Korean Solar Energy Society
• /
• v.31 no.6
• /
• pp.78-85
• /
• 2011

In this study, an underfloor air distribution(UFAD) system installed on the S. office building was evaluated for its indoor environmental quality performance. Field measurement and survey were conducted for the overall POE(Post Occupied Evaluation). PMV(including temperature, humidity, air velocity and globe temperature) and several environmental components were measured while thermal comfort, thermal sensation, acoustical environment and others. were investigated through survey. Except for the direct upper part of the air supply diffuser on the floor, the indoor velocity was less than 0.25m/s, which has been suggested by ASHRAES tandard 55 as the limit for thermal comfort. MRT of the perimeter zone of the room showed a higher value than that in the interior because of the introduced solar radiation through the building envelope. PMV was generally maintained in the range of thermal comfort (from -0.5 to +0.5), though it weighted to the warm side. It was reported to have 61% positive response on thermal comfort and 55% on neutral thermal sensation. The results of each survey item showed some gender-based differences. Specifically, female respondents had higher degree of dissatisfaction with indoor air cleanness and acoustical privacy. The working surface showed more than 400 lux and the equivalent noise level showed less than 50 dB(A). In conclusion, the results of the measurement and survey showed good agreement. Indoor environmental quality of the subject office room where the UFAD system was installed showed an overall excellent performance.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.19-30
• /
• 2006

The purpose of this study was to examine the effect of foot orthotics on the overall comfort and muscle activity during running. The subjects were 10 members from the joggers' club which consisted of 2 women and 8 men. These individuals ran on the treadmill by 4.0m/s speed with and without the custom foot orthotics. The data concerning the overall comfort was collected by a questionairre that examined the overall comfort, heel cushioning, forefoot cushioning, medio-lateral control, arch height, heel cup fit, shoe heel width, forefoot width, and shoe length The MegaWin ver. 2.1(Mega Electronics lid, Ma. Finland) was used to gain electromyography signals of the muscle activity; Tibialis anterior, medial gastronemius, lateral gastronemius, vastus lateralis, vastus medialis, biceps femoris, and rectus femoris were measured. The results of the study were as follows. 1. During running the overall comfort was higher for the foot arthotic condition than the nonorthotic condition. Among the inquiries the overall comfort showed the biggest difference comparing the two conditions. and the shoe heel width showed the highest score for contort. 2 The muscle activity of the biceps femoris, and vastus lateralis in the stance period decreased. due to the foot orthotics. The muscle activity of the vastus medialis in the swing period also decreased and the muscle activity tibialis anterior in the stance and swing stance decreased as well During running, orthotics showed positive result in foot comfort. The foot comfort related to decreased stress, muscle activity, and foot arch strain. Overall comfort and the adequate decrease of muscle activity were associated with injury prevention and the best method to prevent injury semms to be the maintenance of foot comfort.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.3
• /
• pp.368-377
• /
• 1998

The purpose of this study was to examine theory about indoor thermal comfort-environment as well as to determine thermal sensation and physiological responses for men in summer indoor environment, under various air temperature and relative humidity, with male university students. Subjective Evaluation, Heart Rate(Electrocardiogram), Electroencephalogram(EEG) were examined. We found that comfort of people was achieved at SE $T^{*}$ 24.7$^{\circ}C$, -0.82＜PMV＜0.93, subject's clothing(0.41c1o)and the difference of skin temperature was found at the calf area as air temperature changes. At low SE $T^{*}$, heart rate was decreased and at high SE $T^{*}$, heart rate was increased but there was no change EEG(keeping $\alpha$-wave).wave).

• Journal of the Ergonomics Society of Korea
• /
• v.21 no.3
• /
• pp.35-46
• /
• 2002

In this study, emotion changes were induced by four imaginations- pleasantness, unpleasantness, arousal, relaxation and it was examined using subjective evaluation and analysis of the physiological signals of the central and autonomic nerve systems whether the intended emotions were appropriately achieved, and whether these emotion changes could be distinguished from the analysis of physiological signals. Each of the four imaginations was implemented on 32 subjects for 30 seconds, while that Electroencephalogram (EEG), Eelectrocardiogram (RSP) were measured, and a subjective evaluation was implemented following the completion of the measurement. The analysis of the subjective evaluation revealed that the subjects underwent the four clearly differentiated imaginations, and the pleasantness level was classified into four imagination stages, pleasantness>relaxation>arousal=comfort>unpleasantness, and arousal level was classified into four imagination stages in the order of arousal>unpleasantness${\approx}$pleasantness>comfort>relaxation. The analysis of the EEG revealed that three stages of pleasantness level, pleasantness>relaxation=arousal=comfort>unpleasantness were classified from the values of ${\alpha}/{\alpha}+{\beta}\;and\;{\beta}/{\alpha}+{\beta}$, and about tour distinguishable stages of arousal level were obtained from the autonomic nervous system responses following the order of arousal>unpleasantness${\approx}$pleasantness> comfort> relaxation. It was found that intended emotion could be induced from the imagination, and these induced emotion changes could be differentiated using the physiological signals of the EEG and autonomic nervous system.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.5
• /
• pp.343-359
• /
• 2016

Objective:In this study, we designed working clothes for livestock farmers to wear in spring and autumn to improve their work efficiency, conducted a physiological test on their performance, and evaluated their comfort. Background: In recent years, livestock farming in Korea has expanded, yet farmers' safety and sanitation levels remain low in hazardous environments that include organic dust, toxic gas, and heat stress, as well as the risk of accidents. Furthermore, most livestock farmers wear ordinary or dust-resistant clothes that are unsuitable for rearing livestock and compromise their safety and health. Thus, it is important to design specialized working clothes for livestock farmers that are comfortable and that minimize their health and safety risks. Method: To this end, we examined the literature on livestock (poultry, swine, and cattle) farmers' safety and sanitation issues, designed appropriate working clothes, and tested them in terms of sensory feel, physiological response, and subjective comfort. Results: The respondents expressed satisfaction with the new working clothes. The results of a physiological test showed a decline in temperature and humidity inside the clothes, a lower pulse rate, and a lower oxygen intake compared to the measurements taken when famers wore their previous working clothes. This indicates a fall in heat stress and fatigue, which was mostly consistent with the results of the assessment of subjective comfort. Conclusion: The results of the analysis show an improvement in the comfort of the new working clothes compared to the dust-resistant clothes that are widely worn. Based on this study, the new working clothes need to be further tested and evaluated to improve the design. Application: This study is expected to contribute to designing better working clothes for livestock farmers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.5
• /
• pp.595-602
• /
• 2024

This paper analyzes serviceability guidelines and index related to the motion of floating structures concerning human comfort. The guidelines for the motion of floating structures regarding human comfort must meet requirements such as including frequency range of floating structure and providing index for vertical direction, which is a major component of human discomfort. Therefore, ISO 2631-1:1997 was found to be applicable. The evaluation of serviceability of the floating structure showed that the frequency-weighted RMS acceleration, due to the characteristics of frequency weighting function, is significantly influenced by the period of the floating structure. Additionally, the frequency-weighted RMS acceleration presented lower values compared to the general RMS acceleration. These results are expected to contribute to the establishment of reasonable guidelines for human activities to the motion of floating structures.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.1
• /
• pp.90-100
• /
• 2013

This study uses a survey questionnaire to identify the major customer age class of adult women who frequently mountain climb as well as analyze their purchasing behavior and preference of mountain climbing pants. The field survey, classified the types of mountain climbing pants, selected the types of mountain climbing pants that consumers preferred, and then analyzed the degrees of satisfaction for mountain climbing pants based on an evaluation of wearing. Specifically, the patterns of mountain climbing pants preferred by national brands and licensed brands were compared and analyzed. The validities of commercially available mountain climbing pants were analyzed through an evaluation of wearing comfort and an evaluation of wearing on a 3D simulation of the human body. The basic data for the development of mountain climbing pants are presented based on the results. The survey questionnaire results indicate that the major class of women consumers of mountain climbing goods was in the 40s to 50s; in addition, the types they most wore were straight type and functional cut type. The preferred brand was KOLONSPORT (which occupies a 21.2% market share), followed by THE NORTH FACE (13.0%), K2 (11.5%) and Kolping (10.0%). The main reason (26.8% of responses) that they preferred these brands was functionality. The difference in measurement of climbing pants patterns could be analyzed accurately in the pattern analysis, the wearing evaluation by the self-sonsory test and evaluation of wearing comfort through 3D simulation. The results of ANOVA on motions and items indicates that no significant difference was found among motions; however, a significant difference was recognized among items. A comparison of straight type and functional cut type showed that the functional cut type excelled slightly in wearing comfort.

• KIEAE Journal
• /
• v.15 no.6
• /
• pp.101-109
• /
• 2015

Purpose: Glazing and shading devices influence a lot on the thermal and visual environment in office buildings. Solar heat and daylight are contrary concept, therefore proper arrangement of thermal and optical performance is needed when designing a glazing and shading devices. The purpose of this study is to examine the conditions of the glazing and shading devices available for promoting the reduction of cooling loads + lighting loads and the improvement in thermal comfort and visual comfort for the summer season in an office building installed with venetian blind. Method: This study established 12 simulation cases which have different glazings and the positions of venetian blind for evaluating different thermal and optical performance. And by using EnergyPlus v8.1 and Window v7.2 program, we quantitatively analyzed cooling loads + lighting loads, thermal comfort and visual comfort in an office building installed with the glazing and shading devices. Result: Consequently, Case 9(Double Low-E+Exterior Blind) is the best arrangement of solar heat gain and daylight influx, thereby becomes the most excellent case of reducing cooling+lighting loads(46.8%) and simultaneously becomes the enhancement case in thermal comfort. Also, DGI(Daylight glare index) under clear sky conditions in summer was evaluated to be 19.6, and thereby satisfied the recommendation level of allowing visual comfort.

• KIEAE Journal
• /
• v.10 no.4
• /
• pp.59-66
• /
• 2010

Natural ventilation is major strategy of 'sustainable building'. It aims to supply fresh air to the indoor, and to remove heat from the indoor during summer. In the latter point of view, natural ventilation can be grouped into two main strategies, daytime ventilation and night cooing. If we take advantage of these two natural ventilation strategies, indoor thermal comfort can be significantly improved. This study focused on grasping the current situation and problem of indoor thermal comfort of the naturally ventilated residential buildings to seek for direction of later studies. Additionally, thermal comfort of residence where the interior blind and exterior insulation were applied was analyzed. It was analyzed that the percentage of the time which satisfy the indoor acceptable operative temperature during summer was 90 ~ 95% and the heat control performance of natural ventilation has a limitation. When the interior blind and exterior insulation were applied, indoor thermal comfort was significantly improved. However, it still need more improvement.

• Journal of the Korean housing association
• /
• v.20 no.4
• /
• pp.19-29
• /
• 2009

The purpose of this study is to evaluate the air diffusion performance of a range of indoor units for room airconditioners; the wall-mounted type, floor-standing type, and ceiling-mounted type. These types of units, which have been widely used in housing spaces, will be studied with respect to thermal comfort and the energy performance using CFD analysis. In this study, current air conditioning status and related problems in housing spaces are examined, and a CFD analysis is performed in order to compare and analyze the thermal comfort and energy efficiency across each type of indoor-unit using the PMV, ADPI, EUC and FCEI indexes. The analysis results collectively considering thermal comfort and energy performance indicated that the ceiling-mounted type 4-way indoor unit showed the best diffusion performance in terms of thermal comfort, and had the second best diffusion performance in terms of energy performance after the wall-mounted type under certain conditions.