• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.2
• /
• pp.131-139
• /
• 2002

There have been many studies about marginal discrepancy of single restorations made by various systems and materials. But many of statistical inferences are not definite because of sample size, measurement number, measuring instruments. etc. The purpose of this study was to compare the marginal adaptations of the anterior single restorations made by different systems and to consider more desirable statistical methods in analysing the marginal fit. The in vitro marginal discrepancies of three different all-ceramic crown systems (Celay In-Ceram. Conventional In-Ceram. IPS Empress 2 layering technique) and one control group (PFM) were evaluated and compared. The crowns were made from one extracted maxillary central incisor prepared with a 1mm shoulder margin and $6^{\circ}$ taper walls by milling machine. 10 crowns per each system were fabricated. Measurements or a crown were recorded at 50 points that were randomly selected for marginal gap evaluation. Non-parametric statistical analysis was performed for the results. Within the limits of this study, the following conclusions were drawn: 1 Mean gap dimensions and standard deviations at the marginal opening for the maxillary incisor crowns were $98.2{\pm}40.6{\mu}m$ for PFM, $83.5{\pm}18.7{\mu}m$ for Celay In-Ceram, $104.9{\pm}44.1{\mu}m$ for conventional In-Ceram, and $45.5{\pm}11.5{\mu}m$ for IPS Empress 2 layering technique. The IPS Empress 2 system showed the smallest marginal gap (P<0.05). The marginal openings of the other three groups were not significantly different (P<0.05). 2 The marginal discrepancies found in this study were all within clinically acceptable standards ($100\sim150{\mu}m$). 3. When the variable is so controlled that the system may be the only one, mean value is interpreted to be the marginal discrepancy of a restoration which is made by each system and standard deviation is to be technique-sensitivity of each one. 4. From the standard deviations. the copy-milling technique (Celay/In-Ceram) was not considered to be technique-sensitive in comparison with other methods. 5. Parametric analysis is more reliable than non-parametric one in interpretation of the mean and standard deviation. The sample size of each group has to be more than 30 to use parametric statistics. The level of clinically acceptable marginal fit has not been established. Further studies are needed.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.9 no.2
• /
• pp.190-200
• /
• 2002

Purpose; The purpose of this study was to develop an instrument to measure sexual satisfaction in Korean adults. Method: Development of items for the instrument was done by a collecting, reorganizing, reducing and selecting process based on the literature. A total of 19 items were selected in this process. For evaluation of the appropriateness of the 19 items, questionnaires were given to an expert group consisting of 18 professionals (7 men and 11 women). Eighteen items having a response of 70% in 'very good' item or 'good' item were included as items for the instrument. With these 18 items, a 5 point Likert scale was developed, and reliability and validity tests of the scale were done. The subjects for the test were 1,127 Korean adults living in 11 areas in Korea, Data were collected from Dec. 1, 2000 to Feb. 28, 2001 and analyzed with SPSS/PC+ 10.0 program. Item analysis and factor analysis were used to assess the reliability and validity of the scale. Chronbach alpha and corrected item-total correlation were obtained to verify internal consistency, and principal component analysis with the varimax rotation was used to identify structure validity of the developed tool. Result: Reliability of the scale was .9503 and corrected item-total correlations of the items were distributed from .5208 to 7899. As a result of the factor analysis, the items were categorized into three factors. The cumulative variance of the three factors was 67.1%, and all of the variances of the factors were above 5%. Because factor 1 (8 items) indicated a special feeling of psychological satisfaction with sexual activity, it was named 'psychological factor'. Factor 2 (8 items) indicated a feeling of satisfaction in the interaction with sexual partner through communication and variation, therefore it was named 'interactional factor'. Factor 3 (2 items) was about the frequency and duration of sexual intercourse and indicated physical dimensions of satisfaction, so it was named 'physical factor'. The average score for sexual satisfaction of the 1,127 subjects was 65.32 (${\pm}12.71$), and histogram of the score showed a normal distribution with skewness - .425. Conclusion: Finally, a Korean Sexual Satisfaction Scale(KSSS) was accepted as a 5 point Likert scale with 18 items after the statistical test for reliability and validity. In conclusion, KSSS is a useful instrument which is valid and reliable can be used to understand the sexuality of Korean adults.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.184-193
• /
• 2016

Purpose: To evaluate marginal leakage of bulk fill flowable composite resin filling with different curing time by using microcomputed tomography technology. Materials and Methods: 30 previously extracted human molars were randomly divided into 6 groups based upon restorative system and different curing time. Class II cavities (vertical slot cavities) were prepared. An individual metallic matrix was used to build up the proximal wall. The SonicFill or SureFil SDR flow was inserted into the preparation by using 1 bulk increment, followed by light polymerization for different curing times. The different exposure times were 20, 40, and 60 seconds. All specimens were submitted to 5,000 thermal cycles for artificial aging. Micro-CT scanning was performed by using SkyScan 1272. One evaluator assessed microleakage of silver nitrated solution at the resin-dentin interface. The 3D image of each leakage around the restoration was reconstructed with CT-Analyser V.1.14.4. The leakage was analyzed with the Mann-Whitney test. Results: Significant differences were observed between the light curing times, but no significant differences were found between the bulk fill composite resins. Increasing in the photoactivation time resulted in greater microleakage in all the experimental groups. Those subjected to 60 seconds of light curing showed higher microleakage means than those exposed for 20 seconds and 40 seconds. Conclusion: Increasing the photoactivation time is factor that may increase marginal microlekage of the bulk fill composite resins. Further, micro-CT can nondestructively detect leakage around the resin composite restoration in three dimensions.

• Korean Journal of Social Welfare
• /
• v.61 no.2
• /
• pp.247-276
• /
• 2009

The purpose of this essay is to explore the methodological standpoint and the meaning of 'Discourse Analysis' in policy science. I discussed it in three dimensions including: 1) the ontological point of view, 2) the epistemological perspective, and 3) researcher's position in policy research. 1) From the ontological standpoint, I explained the policy as a text, context, discourse, and ideology, that is focused on being constructed by the formative power of language. 2) The ontological standpoint produced "the argumentative turn" in the policy analysis, and many policy analysts emphasize the argumentative process of policy making and evaluation. This argumentation process includes the interpretative and critical viewpoints as well as the normative and ethical characteristics of policies in the discourse analysis. We should reexamine reality critically because discourse is ultimately influenced by the prevailing cultural and social norms. Therefore, an interpretative and critical viewpoint is an epistemological perspective in the discourse analysis. This critical approach creates an awareness of the limitations on our thinking under the particular major discourse, and requires the self-reflection within and beyond the discourse. This process leads to the human emancipation. 3) In order to achieve this emancipation, the last approach suggests that we need to scrutinize "the subject" as a researcher, who is also influenced and subjectified by the major discourse and, thus must deconstruct his or herself. Last but not least, we should emphasize the researcher's role as a listener of the minor voice(discourse) and even the silence of the clients.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.936-942
• /
• 2018

The diagnostic multi-leaf collimator preventing unnecessary dose from entering into patients during the diagnostic examination was made in this study. The movement of the entire 50 leaves was embodied with the group of 25 ones thereof configured in a pair facing each other on the left and right of the median line. Dimensions of the length, width, and height of each shielding leaf were $5{\times}0.5{\times}0.5cm^3$ resulting in the maximum boost field of $10{\times}10cm^2$. The material of multi-leaf collimator had the excellence on the machinability with the use of the SKD-11 alloy tool steel having the high wear resistance against frequent movement, and it was devised to control both-side's shielding leaves by moving 2 motors unlike existing remedial multi-leaf collimator that use as many motors as the number of 50 shielding leaves. Thereafter, the transmission dose of leaves, cross-leaf leakage dose, and inter-leaf leakage dose were measured by the developed multi-leaf collimator attached to X-ray equipment. An ionization chamber was used to detect doses there from, and the comparative analysis was carried out by means of the radiographic film that was easy to detect the dose leakage in between each leaf. Results obtained from the test conducted in comparative analysis yielded approximately 98%, 96%, and 94% of shielding efficiency realized at each level of energy of 80kV, 100kV, and 120kV it was confirmed there was no dose leakage resulted from the varied level of irradiation energy. Thus the multi-leaf collimator to be developed based on this study is thought that it could fully reduce the unnecessary dose to patients in the diagnostic test and the shielding efficiency thereof is expected to be increasing if it is made in a miniaturized form with a way of increasing the thickness of each leaf later for an extended application to general diagnostic purposes.

• Korean Journal of Biological Psychiatry
• /
• v.17 no.2
• /
• pp.94-102
• /
• 2010

Objectives : Eye movement desensitization and reprocessing(EMDR) is a novel, time-limited psychotherapy originally developed for treatment of psychological trauma. The effectiveness of this therapy has been validated only for posttraumatic stress disorder ; however, EMDR is often applied to other psychiatric illnesses, including other anxiety disorders and depression. This pilot study tested the efficacy of EMDR added to the routine treatment for individuals with acute stage schizophrenia. Methods : This study was conducted in the acute psychiatric care unit of a university-affiliated training hospital. Inpatients diagnosed with schizophrenia were randomly assigned to either three sessions of EMDR, three sessions of progressive muscle relaxation(PMR) therapy, or only treatment as usual(TAU). All the participants received concurrent typical treatments(TAU), including psychotropic medication, individual supportive psychotherapy and group activities in the psychiatric ward. The Positive and Negative Syndrome Scale(PANSS), the Hamilton Depression Rating Scale and the Hamilton Anxiety Rating Scale were administered by a clinical psychologist who was blinded to the patients' group assignment. Results : Forty-five patients enrolled and forty patients(89%) completed the post-treatment evaluation. There were no between-group differences in the withdrawal rates of patients during the treatment or at the three-month follow-up session. All three groups improved significantly across each of the symptomatic domains including schizophrenia, anxiety, and depressive symptoms. However, a repeated measures ANOVA revealed no significant differences among the groups over time. Effect size for change in total PANSS scores was also similar across treatment conditions, but effect size for negative symptoms was large for EMDR(0.60 for EMDR, 0.39 for PMR and 0.21 for TAU only). Conclusion : These findings supported the use of EMDR in treating the acute stage of schizophrenia but the results failed to confirm the effectiveness of the treatment over the two control conditions in three sessions. Further studies with longer courses of treatment, more focused target dimensions of treatment, and a sample of outpatients are necessary.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.558-570
• /
• 2015

A study on the green ship design for Ultra Large Container Ship (ULCS, 18,000 TEU Class Container Ship) was performed based on the four step procedures of the initial design and hull form optimization to maximize economic and propulsive performance. The first, the design procedure for ULCS was surveyed with economic evaluation considering environmental rules and regulations. The second, the characteristics of single and twin skeg container ships were investigated in view of initial design and performances. The third, the hull form optimization for single and twin skeg ships with the same dimensions was conducted to improve the resistance and propulsive performances at design draught and speed by several variations and the results of the optimization were verified by numerical calculations of CFD and model test. The last, for the estimated operating profile of draught and speed, the hull forms of single and twin sked ships were optimized by CFD. From this study, the methodologies to optimize the hull form of ULCS were proposed with considerations during the green ship design and the improvement of the energy efficiency for the optimized hull forms was confirmed by the proposed formula of the total energy considering design conditions, operating profile and fuel oil consumption.

• Journal of Service Research and Studies
• /
• v.9 no.3
• /
• pp.17-38
• /
• 2019

With recent dispersion of sharing economy, consumption culture of sharing, instead of ownership, gets wide spread in the age groups of 20-30. Even though the market of car sharing expands rapidly, little research has been done in the area of service quality and consumer behavior regarding car sharing services. Given that future market potential gets larger, it seems highly meaningful to conduct research on customer satisfaction and their usage behavior regarding car sharing services. This paper intends to analyze main factors affecting overall customer satisfaction on car sharing services; satisfaction on service quality, satisfaction on service product, and satisfaction on service experience. Each dimension of the three factors is also analyzed to see if there is any differences between major three brands. Further analysis has been done for checking any effects of gender and usage purpose of customers on the overall customer satisfaction. Key results of the analysis show all the three main factors have significant effect on overall customer satisfaction. Each dimension of service quality has significant effect on satisfaction on service quality. Dimensions of parking lot accessability and vehicle maintenance in service product evaluation, have greater effect on satisfaction on service product. In service experience, positive affect have greater effect than negative affect on satisfaction on service experience. Women users perceive larger overall customer satisfaction on car sharing services than men users. On the types of usage purpose, Users with purpose of tour and dating/meeing friends perceive larger overall customer satisfaction on car sharing services than user without it. Further managerial implications of car sharing services are also provided.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.6
• /
• pp.383-390
• /
• 2019

A helideck is one of the essential structures in offshore platforms for the transportation of goods and operating personnel between land and offshore sites. As such, it should be carefully designed and installed for the safety of the offshore platform. In this study, a structural design optimization method for a lightweight offshore helideck is developed based on a genetic algorithm and an attainable design set concept. A helideck consists of several types of structural members such as plates, girders, stiffeners, trusses, and support elements, and the dimensions of these members are typically pre-defined by manufacturers. Therefore, design sets are defined by collecting the standard section data for these members from the American Institute of Steel Construction (AISC), and integer section labels are assigned as design variables in the genetic algorithm. The objective is to minimize the total weight of the offshore helideck while satisfying the maximum allowable stress criterion under various loading conditions including self-weight, wind direction, landing position, and landing condition. In addition, the unity check process is also utilized for additional verification of structural safety against buckling failure of the helideck.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.125-133
• /
• 2010

Researches and studies which have been conducted so far on external confinement of long span concrete columns have mainly concentrated on concentric loading. But, long span bridge concrete columns over the sea are mainly subjected to concentrated axial load, and at the same time lange amount of moment by eccentric load. This paper experimentally investigates the performance of externally confined high-strength concrete columns subjected to loading mechanism and evaluates the effectiveness of two confinement materials carbon fibre and high performance glass fibre. Twelve short columns with the same dimensions were cast and tested Six columns were reinforced with hoop bars, the remaining six columns were reinforced with spiral bars and wrapped with three layers of carbon failure and high performance glass FRP sheets. Test variables considered were the shape of internal reinforcement and strengthening materials according to loading location. The experimental results showed that eccentric load could obviously lower down the maximum failure load of FRP-confined concrete columns, compared with the columns under concentric load. And compared with the carbon FRP-confined reinforced concrete columns, high performance glass FRP-confined columns displayed a higher load capacity and ductility, when tested both concentrically and eccentrically.