• 한국의류학회지
• /
• 제24권7호
• /
• pp.1004-1014
• /
• 2000

The purpose of this study was to develop a well-fitting bodice basic pattern for high school irk. Two bodice patterns were first made based on the most recent existing drafting methods and sensory evaluation was done on the patterns by the present researchers Two high school girls possessing standard physical condition tried and evaluated the functionality of the garments made by the two bodice patterns. Based on the results of the evaluation, a new bodice basic pattern was developed. The new bodice basic pattern was drafted by long measurement method. The dimensions of new bodice basic pattern were as follows. Bust circumference=B/2+4cm, Arms hole depth=C.B/2+1.5cm, Back width=B/6+4cm, Front width=B/6+3cm, Back neck width=B/12+0.5cm, Back neck depth=Back neck width/3cm, Front neck width=B/12cm, Front neck depth=B/12+0.5cm. The sensory and functional evaluations were also conducted for the new bodice basic pattern and the two patterns drafted by the existing methods. The new bodice basic pattern showed better fit both visually and functionally than the existing patterns. SPSS package including means, standard deviation and one-sample T-test were used for data analysis.

• 대한디지털의료영상학회논문지
• /
• 제11권2호
• /
• pp.109-114
• /
• 2009

Carried out an experiment for quantitative evaluation about intraoral sensor among oral dental imaging equipments in PACS environment. For evaluation, testing environment & evaluation criteria are established that refer to the 'IEC 62220-1-2' and experimented with set up the standard radiation penetration that correspond with RQA-3(IEC 61267). Results of experiments using the image J, derived the ESF(edge spread function), LSF (line spread function) and calculated the MTF(modulation transfer function) finally. As a result, the MTF that 0.1, 0.2sec are 10% about 10 lp/mm and 0.32 sec is the 10% about 9 lp/mm in level represents the value of the MTF. Change of scan condition in dental environmental, according to the MTF value taken note that no changes can be seen enough. However, the dimensions of each other size $1(1200{\times}1600)$, size $2(1440{\times}1920)$ intraoral sensors for 3 lp/mm, respectively 40%, 90% of the note might have been the difference between the value of MTF, in accordance with standard sensors might note differences could be observed.

• 한국안전학회지
• /
• 제26권5호
• /
• pp.17-22
• /
• 2011

This study proposes feature extraction method of pattern recognition by evaluation of weld defects in weld zone of titanium. For this purpose, analysis objectives in this study are features of attractor quadrant and fractal dimension. Trajectory changes in the attractor indicated a substantial difference in fractal characteristics resulting from distance shifts such as porosity of weld zone. These differences in characteristics of weld defects enables the evaluation of unique characteristics of defects in the weld zone. In quantitative fractal feature extraction, feature values of 0.87 and 1.00 in the case of part of 0.5 skip distance and 0.72 and 0.93 in the case of part of 1.0 skip distance were proposed on the basis of fractal dimensions. Attractor quadrant point, feature values of 1.322 and 1.172 in the case of ${\phi}1{\times}3mm$ porosity and 2.264 and 307 in the case of ${\phi}3{\times}3mm$ porosity were proposed on the basis of distribution value. The Proposed feature extraction of pattern recognition in this study can be used for safety evaluation of weld zone in titanium.

• 대한조선학회논문집
• /
• 제56권3호
• /
• pp.187-199
• /
• 2019

In the case of gas carriers and oil tankers, pipes are installed on the upper deck as a moving passage to load LPG, LNG, crude oil, etc. Pipes used for loading or unloading liquid cargo in cargo holds are connected to the hull through support structures. However, many cases of hull damage have been reported where the various equipment and support structures are installed on the upper deck. It is assumed that not only the structural discontinuity where the hull and the pipe support structure meet, but also action due to the pipe loads and the hull girder bending moment are simultaneously affected. This paper deals with the design and strength evaluation of the support structure of pipes and cables installed on the upper deck of commercial ships and offshore structures. For these supporting structures, design conditions and working loads were defined. The design procedure was established through the structure analysis on the method of determining the member dimensions. A series of finite element analysis was performed on the factors to be considered in the design and the effects were discussed. The accuracy and design periods of the strength evaluation was improved and reduced by application of the automation program in the finite element analysis. It is also expected that the design reliability of the shipyard is improved.

• 한국도서관정보학회지
• /
• 제36권3호
• /
• pp.85-107
• /
• 2005

기관 리포지토리에 대한 평가지표를 개발하기 위하여 국내외 기관 리포지토리에 대한 문헌 연구를 통하여 평가요소를 도출하였으며, 도출된 평가 요소들이 도서관 업무 현장에서의 적용가능성과 타당성을 검증하기 위하여 국내외 16개 대학도서관을 대상으로 사례연구와 20개 대학도서관을 대상으로 델파이조사를 실시하였다. 연구결과, 4개 평가영역과 29개 평가지표를 도출하였다. 제안된 평가지표는 향후 dCollection 사업을 수행하는 대학도서관의 운영현황을 객관적으로 평가하여 바람직한 방향으로 운영을 개선할 수 있는 하나의 지침으로써 활용될 수 있을 것이다.

• 간호행정학회지
• /
• 제7권2호
• /
• pp.285-300
• /
• 2001

To meet standards for high quality of care and satisfied customers, an evaluation tool about nursing care is necessary. And, We need to evaluate our practice continuously for the improvement in quality and outcomes. This study was intended to develop an evaluation tool about nursing care in NSICU, and was progressed of 3 steps; development, content validity verification and reliability verification. Data were obtained and analysed from Feb. To April, 2000. Development process of the study was as follows A preliminary list was made item by item on the basis of clinical Experience, literature review and patients' record review. Then the standards, criteria and indicators of preliminary evaluation tool were set by 5 clinical nursing panel, and their content validity was reviewed by 27 ICU nurses. Finally, an evaluation tool was developed and verified the reliability at c-university hospital located in Kwang-Ju. The results of this was as follows 1) The evaluation tool of this study developed 8 standards, 39 criterias and 106 indicators. The standards were divided into two dimensions. One was process dimension which contained 4 standards(26 criteria), The other was outcome dimension which contained 4 standards(13 criteria). 2) the Average content validity of the tool was 3.39 at standards, 3.55 at criteria and 3.51 at indicators. 3) Interrater reliability of the tool is r=.7993(p<.001) & internal consistency reliability ${\alpha}$ is .6031 4) Scores of NSICU Patients who participated in this study were 57 at total mean score, 58 at process mean score and 56 at outcome mean score The evaluation tool developed in this study seems to be useful in evaluation nursing practice appropriately for the improvement of nursing care in NSICU. I hope that this evaluation tool can be used effectively in NSICU as an intervention for the improvement of quality control.

• 대한인간공학회지
• /
• 제36권2호
• /
• pp.123-144
• /
• 2017

Objective: The objective of this study is to evaluate affection on how users perceive colors viewed from an automotive visual display according to cultural and radical differences including North America, Europe, and Southeast Asia. This study especially aims to identify effects of the variation of tone and chroma of representative color groups by analyzing affection differences depending on cultural and racial differences targeting the colors constituted through variation of tone and chroma, centered on representative colors. Background: The colors of the menu, information display or background viewed through an automotive visual display are an important factor stimulating consumer's affection, and therefore an effort to express the vehicle's brand and product image through colors is made. The studies on colors focus only on the research on unique characteristics of colors, but an affective approach lacks according to cultural and racial differences on colors considering tone and chroma variation within a color from the currently used automotive visual displays. Method: To grasp the visual affection felt by users, this study extracted affective adjectives related with colors through existing literature and a dictionary for adjectives, and presented human affection dimensions on colors through evaluation of various colors. Prior to carrying out affection evaluation, the basic light sources, red (R), green (G), and blue (B) constituting the colors used for automotive visual displays were defined as a representative color group, respectively. When colors in a color group are constituted, the evaluation target of each color group consisted of the colors considering the variation of tone and chroma by changing color sense through RGB values of the remaining two light sources. And then, this study carried out affection evaluation on the constituted colors targeting the subjects with cultural and racial differences. Results: As a result of evaluating the constituted colors with representative affections, there were statistically significant differences between the groups having cultural and racial differences. As a result of S-N-K post-hoc analysis on the colors showing significant differences, North America and Europe were classified as heterogeneous groups. In some cases, Korea was classified as the homogeneous group with North America, but Korea was mainly classified as the homogenous group with Europe. Conclusion: The representative affections on colors from an automotive visual display was drawn as three affective dimensions: passionate, neat, and masculine. Based on these, the affection of Korea and Europe on the constituted colors showed significant differences from that of North America, as a result of affection evaluation on the constituted colors viewed through the visual display by reflecting cultural and racial factors. Regarding representative color groups, bigger cultural and racial differences were revealed in terms of affection on red and green colors than on blue color, and variation of affection was the biggest in the red color. Application: This study analyzed correlations of affection considering the colors constituted through variation of tone and chroma, and the culture and race in the representative color groups constituting a visual display. The results of this study are predicted to be utilized in coordination and selection of colors viewed from an automotive visual display taking into account culture and race.

• 한국디지털건축인테리어학회논문집
• /
• 제13권1호
• /
• pp.33-41
• /
• 2013

Considering the fact that quality of life(QOL) conceptually has objective and subjective attributes but difficulties in measuring the subjective aspect cause a number of studies not to be balanced, this study exploits AHP(Analytical Hierarchy Process) which has been used for systematic decision making to include the other aspect. As the first step of the process decision making hierarchy model is set by content analysis of the UNDP QOL index and additional review of previous studies. 'Improving urban QOL' is a goal on top, 'Economical QOL', 'Environmental QOL', 'Social QOL' and 'Physical QOL' are dimensions of sub-goal(means objectives), and further decomposition follows. AHP shows that the dimensions of economical, physical, environmental and social QOL scored higher respectively. The aim of the model is to measure and prioritize the urban QOL in the two case study cities. The final score of the each city could be computed by integration of relative weights of dimensions for urban QOL. The final score of QOL for city A was 0.6642 and for city B the figure decreased to 0.3358. The method of this study could be used in stages of the process of urban planning. First stage is when planners try to have a correct and reliable perspective from the existed conditions of the city. Second stage is when the projects should be investigated to be confirmed for their efficiency. In other words planners can direct the scarce resources towards the aspects of QOL which are more important. And the results revealed that using AHP creates opportunity to involving the different groups in the stage of criteria weighting so that the attitudes of local community could be integrated well to the decision making to be suitable for a new paradigm of participatory and communicative planning.

• 한국의료질향상학회지
• /
• 제6권1_2호
• /
• pp.108-119
• /
• 1999

Background : To study any interference of demonstrated in different patient satisfaction scores for the same questionnaires handled by hospital staff and by independent surveyors, respectively. Methods : This study included 728 subjects who were admitted to a university hospital from June 22 to July 1, 1999. The contents of the questionnaire were composed of six dimensions: hospital structure and process, staffs technical competence and humaneness, information & education and communication. Measurements were performed on a 5-score Likert scale. T-test and logistic regression analysis were also performed. Results : In an outpatient survey, satisfaction scores from a questionnaire delivered by hospital staff were significantly higher than independent surveyors for the dimension of communication, but no differences were shown among other dimensions. In an inpatient survey, satisfaction scores by hospital staff were higher for the process and communication dimensions(p<0.05). In particular, in both the inpatient and outpatient surveys, the difference of satisfaction scores for personnel items were significant between groups. After adjustment for age and sex those differences were significant between groups. Conclusion : To minimize the bias on questionnaire survey, the effects of personnel, who deliver and gather the questionnaire should be carefully considered in the evaluation of health service satisfaction.

• 대한의용생체공학회:의공학회지
• /
• 제41권4호
• /
• pp.147-153
• /
• 2020

This study was to evaluate the usability of self-developed phantom for evaluating automatic exposure control (AEC) using three-dimensions (3D) printer. 3D printer of fused deposition modeling (FDM) type was utilized to make the self-developed AEC phantom and image acquisitions were conducted by two different type of scanners. The self-developed AEC phantom consisted of four different size of portions. As a result, two types of phantom (pyramid and pentagon shape) were created according to the combination of the layers. For evaluating the radiation dose with the two types of phantom, the values of tube current, computed tomography dose index volume (CTDIvol), and dose length product (DLP) were compared. As a result, it was confirmed that the values of tube current were properly reflected according to the thickness, and the CTDIvol and DLP were not significantly changed regardless of AEC functions of different scanners. In conclusion, the self-developed phantom by using 3D printer could assess whether the AEC function works well. So, we confirmed the possibility that a self-made phantom could replace the commercially expensive AEC performance evaluation phantom.