• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.472-474
• /
• 2010

MOST Network는 차량내 멀티미디어 네트워크로 버퍼링없는 실시간 오디오 및 비디오를 전송할 수 있는 동기식 데이터 전송영역, 실시간을 요구하지 않는 패킷 데이터를 전송하는 비동기 영역, 그리고 MOST 디바이스를 제어하기 위한 control 채널이 존재한다. 본 논문에서는 차량용 멀티미디어 네트워크인 MOST Network에서 현재 널리 사용되고 있는 Ethernet과의 데이터 통신을 위한 Ethernet Frame 전송 방안을 제안한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.381-385
• /
• 2010

An aging Society solitary life old mans are increasing. The nurses have to visit old mans and must confirm their disease, because they do not act well. It is very difficult to take care old man, because the number of Nurses are small. This problem is solved by collection of data about condition of old mans from long distance. Data communication with Ethernet have benefit to collection of measurement of old man's condition. The Data storage system an long distance place are storaged data and after several day data was transmitted to the DB over the Ethernet. For Miniaturization of such system the system must be OS-less Embedded Ethernet Server system. Such system manages the file management system only with H/W. The Storage device is used SD-card. SD Card is small size and operates with small power. By using 512MB sd memory card, it is possible to storage during 5~6 years, 10 byte of temperature value per second. In this paper, we make a Embedded Ethernet Server using W3100A, Atmega128 MCU and data stroage device using SD-Card. This system operates with O/S-less Embedded Ethernet Server. We talk about file System, Storage and Ethernet. We explained about MCU Atmega128, Interface between LAN LSIand W3100A, Interface between W3100A and Phyceiver RTL8201, data I/O between MCU and SD-Card and File System. We shows the experiment device and result of monitoring.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.45-53
• /
• 2004

This paper proposes and analyzes a new media access control (MAC) scheduling algorithm, “Interleaved Polling with Deficit Round Robin (IPDRR)” that supports weighted fairness among ONUs in Ethernet Passive Optical Network (PON). The purpose of the proposed IPDRR algerian is not only to eliminate the unused bandwidth of upstream ONU traffic, but also to provide weighted fair sharing of upstream bandwidth among ONUs in Ethernet PON systems. Simulation results show that the IPDRR improves the utilization of upstream channel by removing the unused bandwidth and provides weighted fairness among ONUs, although the IPACT scheduling is unfair according to traffic characteristics.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1180-1187
• /
• 2010

In these days, data processing rate is increasing on shipboard. To solve the problems on the rate, Ethernet based IEC 61162-4 series standard established for integrated information management. But the standard is difficult to implement, so it is changed into Light-weight Ethernet standard. In this paper, we analyze the existing standard and compare it with Light-weight Ethernet standard. As a result, we draw its service requirements. Also we propose the services, and design and implement the service modules.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.1
• /
• pp.90-98
• /
• 2003

The real-time industrial network, often referred to as fieldbus, is an important element for building automated manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices, numerous fieldbus protocols have been announced. But the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. Therefore, as an alternative to fieldbus, the computer network technology, especially Ethernet (IEEE 802.3), is being adapted to the industrial environment. However, the crucial technical obstacle for Ethernet is its non-deterministic behavior that makes it inadequate for industrial applications where real-time data have to be delivered within a certain time limit. Recently, the development of switched Ethernet shows a very promising prospect for industrial application due to the elimination of uncertainties in the network operation resulting in much improved performance. This paper focuses on the application of the switched Ethernet for industrial communications. More specifically, this paper presents an analytical and experimental performance evaluation of the switched Ethernet and a case study about networked control system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4B
• /
• pp.217-226
• /
• 2007

By growth of digital media devices, a number of researches are in progress for transmission of isochronous traffic over network. Above all, network techniques that apply Ethernet, are in the limelight because of advantages of Ethernet. A standardization of network technique for isochronous traffic over Ethernet is in progress in IEEE 802.1 AVB TG. This paper proposed network technique for isochronous traffic over Ethernet model, that is, synchronous Ethernet model with synchronization method between devices. And this paper proposed bandwidth reservation method for transmission of isochronous traffic in synchronized devices. In this paper, synchronous Ethernet model is implemented through OPNET, efficiency of proposed methods is analyzed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.744-749
• /
• 2013

The protection switching technology is widely adopted in the fiber-optical transmission equipments based on TDM(Time Division Multiplexing), such as PDH, SDH/SONET. A variety of protection switching algorithms for Ethernet networks and the progress of standardization are summarized in the document. There are several kinds of protection switching algorithms for Ethernet networks, such as STP, RSTP, MSTP and etc. However, since Ethernet signal move through detour route, it causes much time to recover. Accordingly, it is difficult to secure a usability of Ethernet networks and QOS(Quality of Service). Also, if the protection switching protocol standardized by IEEE and ITU-T is used, it remains a inherent network switching time for protection. Therefore, a specific protection switching algorithm for Ethernet are needed for seamless and stable operation of Ethernet networks service for Distribution Automation System(DAS). A reliable protection algorithm with no switching delay time is very important to implement Self-healing service for DAS. This study of FPGA based protection switching algorithm for Ethernet networks shows that in case of faults occurrence on distribution power network, immediate fault isolation and restoration are conducted through interaction with distribution equipments using P2P(Peer to Peer) communication for protection coordination. It is concluded that FPGA based protection switching algorithm for Ethernet networks available 0ms switching time is crucial technology to secure reliability of DAS.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.79-88
• /
• 2015

In this paper, we examine Ethernet based vehicle network which is recently emerging technology. Current MOST for entertainment will be soon replaced with the emerging Ethernet based vehicle network. Although legacy standard Ethernet has several advantages it is not suitable for vehicle backbone network without any modification. As a result, many researches are happening on extending and modification of the Ethernet function for realtime and reliability. Time-triggered Ethernet, one of many trials known as AS6802, is investigated on the architecture and functionalities. We design the traffic model on Time-triggered Ethernet and analyse the latency of the network. We also consider the QoS requirement and environment of operating configuration for vehicle network.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.491-494
• /
• 2002

The real-time industrial network often referred to as fieldbus, is an important element for building automated manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices such as sensors, actuators, and controllers. numerous standard organizations and vendors have developed various fieldbus protocols such as Profibus, WorldFIP and Foundation Fieldbus. However, the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. In order to solve these problems, the computer network technology, especially Ethernet (IEEE 802.3), is being adopted lo the industrial environment. The crucial technical obstacle for Ethernet is that its non-deterministic behavior makes it inadequate for industrial applications where real-time data such as control command and alarm signal hale to be delivered within a certain time limit. Recently, the development of switched Ethernet shows a very promising prospect for industrial application due to the elimination of uncertainties in the network operation resulting in much improved performance. This paper focuses on the application of the switched Ethernet for industrial comm unications.

• ETRI Journal
• /
• v.26 no.4
• /
• pp.321-331
• /
• 2004

In this paper, we propose a new dynamic bandwidth allocation (DBA) algorithm for multimedia services over Ethernet PONs (passive optical networks). The proposed algorithm is composed of a low-level scheduler in the optical network unit (ONU) and a high-level scheduler in the optical line terminal (OLT). The hierarchical DBA algorithm can provide expansibility and efficient resource allocation in an Ethernet PON system in which the packet scheduler is separated from the queues. In the proposed DBA algorithm, the OLT allocates bandwidth to the ONUs in proportion to the weight associated with their class and queue length, while the ONU preferentially allocates its bandwidth to queues with a static priority order. The proposed algorithm provides an efficient resource utilization by reducing the unused remaining bandwidth caused by the variable length of the packets. We also define the service classes and present control message formats conforming to the multi-point control protocol (MPCP) over an Ethernet PON. In order to evaluate the performance, we designed an Ethernet PON system on the basis of IEEE 802.3ah "Ethernet in the first mile" (EFM) using OPNET and carried out simulations. The results are analyzed in terms of the channel utilization, queuing delay, and ratio of the unused remaining bandwidth.