• KSBB Journal
• /
• v.14 no.4
• /
• pp.490-494
• /
• 1999

This study was carried out to examine some factors affecting the supercritical carbon dioxide extraction of genistein from soybean. The factors investigated in this study were pressure, temperature, flow rate of carbon dioxide, and concentration of modifier. It was foumd out that genistein is not extracted in the absence of modifier. Ethanol was found to be more effective modifier than methanol. 70% of genistein was extracted at 35$^{\circ}C$, 300bar and ethanol 15% (w/v) as compared with the performances of organic solvent extraction.

• KSBB Journal
• /
• v.16 no.1
• /
• pp.95-98
• /
• 2001

Various factors affecting the supercritical carbon dioxide extraction of daidzein from soybean were studied. Daidzein was not extracted with pure supercritical carbon dioxide. The ethanol was an efficient modifier for supercritical carbon dioxide to extract daidzein. The extraction efficiency increased as the pressure increased up to 300 bar. At $35^{\circ}C$ and 300 bar, 93% of daidzein was extracted with supercritical carbon dioxide modified with 15% of ethanol.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1057-1061
• /
• 2002

Effects of modifier and soaking on extraction of triterpenoid saponin (glycyrrhizin) from liquorice were examined using supercritical $CO_2(SC-CO_2)$ at 50 MPa, $60^{\circ}C$, and flow rate of 3 mL/min, and glycyrrhizin content was analyzed by HPLC. Additon of undiluted methanol, ethanol or isopropanol as modifier to $SC-CO_2$ had little influence on extraction yield of glycyrrhizin. Soaking process using water increased the extraction yield as the sample to solvent ratio was increased. Addition of 70% methanol, ethanol or isopropanol to $SC-CO_2$ significantly increased the extraction yields, with 70% methanol resulting in the highest yield. When water at 90% (w/w) of sample weight was used for soaking, the extraction yield and rate increased, 70% ethanol-modified $SC-CO_2$ was almost equal to that obtained using 70% methanol.

• KSBB Journal
• /
• v.18 no.5
• /
• pp.347-351
• /
• 2003

The extraction of glycyrrhizic acid from licorice using supercritical carbon dioxide (SCCO$_2$) was investigated with respect to the effects of extraction parameters such as the kind and amount of modifier, temperature, pressure, and extraction time. The conventional organic solvent extraction was also conducted for a quantitative comparison. The content of glycyrrhizic acid in crude extracts was analyzed by HPLC and the yield of glycyrrhizic acid was computed as a weight percent recovery. The optimal pressure and temperature for SCCO$_2$ extraction were found to be 40 MPa and 80$^{\circ}C$, respectively, when SCCO$_2$ was modified with 70% aqueous ethanol. Under the same pressure and temperature, the highest recovery was attained to be 104.57% in the first 60 min when the concentration of 60%, aqueous ethanol in SCCO$_2$ was 15%.

• Analytical Science and Technology
• /
• v.21 no.5
• /
• pp.392-396
• /
• 2008

Acer tegmentosum is a tree used to treat various liver diseases in Korea. There have been some concern regarding the safety of Acer tegmentosum due to some toxic chemical compounds in its stems. Supercritical fluid extraction (SFE) was employed to develop a removing method of toxic compounds from Acer tegmentosum. The toxic compounds were effectively extracted with ethanol modified supercritical fluid $CO_2$. The optimum condition of SFE was 100 bar of pressure, $40^{\circ}C$ of extraction temperature, 3 mL/min of $CO_2$ flow rate, 0.2 mL/min of modifier (ethanol) flow rate.

• Journal of Life Science
• /
• v.13 no.5
• /
• pp.569-575
• /
• 2003

Supercritical $CO_2$ extraction was applied to extraction of the valuable compound for benign prostatic hyperplasia from saw palmitto. Three levels of parameters, temperature $(35^{\circ}C,\; 60^<\circ}C)$, pressure 22∼30 Mpa and ethanol modified solvent concentration, were used as the independent variables of central composite to rotate the design. The extracting pressure and temperature interaction was significantly affected the extraction of valuable compounds. The ethanol was an efficient modifier to extract valuable compound by supercritical carbon dioxide. The optimal processing conditions were extracting pressure, 30 Mpa, extracting temperature, $60^<\circ}C$, ethanol modifier, 15% for extracts of the valuable compounds from saw palmitto. In conclusion, it was found that supercritical $CO_2$ extraction can successfully be applied to extract high quality extracts from saw palmitto.

• Korean Journal of Materials Research
• /
• v.13 no.11
• /
• pp.725-731
• /
• 2003

The effect of organic processing parameters on the dispersion stability of the BaTiO$_3$-based dielectric particles and borosilicate glass particulate suspensions was investigated in a system where organic solvents, dispersant, binder and modifier were used as processing additives in a low temperature cofired ceramic fabrication processes. Two- and three-component organic solvents were used to disperse ceramic particles and it was found the better stability in the particulate suspension prepared in a bi-solvent, which was consists of toluene and ethanol in a non-azeotropic composition. The addition amount of organic additives had a great impact on dispersion in the present investigation. The flow curves of the suspensions prepared with binder and modifier were fitted according to the power-law equation, which indicates that the internal structure of the suspension could be disturbed under the applied shear stress. Finally, the LTCC green tapes were successfully tape-cast based upon the optimum formulation of LTCC suspension and its microstructure was compared with that of the hard-agglomerates.

• Analytical Science and Technology
• /
• v.10 no.5
• /
• pp.325-331
• /
• 1997

Among various CE separation methods, micellar electrokinetic capillary chromatography(MECC) method using sodium dodecylsulfate(SDS) provides rapid and accurate separation of organic explosive constituents with easy. The running buffer was composed with 2.5 mM borate and 25mM SDS(pH 8.5). Addition of 1M urea and 10% organic modifiers (acetonitrile, methanol and ethanol) improves the resolution of adjacent explosive constituents. When 15 explosive constituents were developed in MECC, most constituents were separated successively while RDX/TNB and DNN/DEP were not, and detection limits of separated compounds are in range of 1 to 4 ppm.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.11
• /
• pp.1019-1023
• /
• 1995

A light-emitting silicon material was prepared by electrochemical etching of n-Si single crystal wafers in a solution of hydrofluoric acid and ethanol. Visible photoluminescence from the silicon was inhomogeneous and decayed rapidly in the ambient laboratory conditions or with photoirradiation. Substantial improvements in photoluminescence which include little-dependent luminescence peak energy with excitation energy variation and longer-lasting room temperature visible photoluminescence were achieved when the surface of photoluminescent silicon material was derivatized with the surface modifier of octadecylmercaptan. Surface modification of the photoluminescent silicon was evidenced by the measurements of contact angles of static water drops, FT-IR spectra and XPS data, in addition to changed photoluminescence. Similar improvements in photoluminescence were observed with the light-emitting silicon treated with dodecylmercaptan, but not with octadecane. The present results indicate that sulfurs of octadecylmercaptans or dodecylmercaptans appear to coordinate the surface Si atoms of LESi and perturb the surface states to significantly change the luminescent characteristics of LESi.

• KSBB Journal
• /
• v.19 no.6 s.89
• /
• pp.427-432
• /
• 2004

The purpose of this study is to investigate the feasibility of a cosolvent-modified supercritical $CO_2\;(scCO_2)$ extraction technique for the production of licorice extracts with high levels of glabridin. The effects of various parameters such as the type and amount of modifiers, extraction temperature ($40{\sim}80^{\circ}C$) and pressure ($10{\sim}50.0\;MPa$) on the extraction efficiency were examined at a fixed flow rate of 1 mL/min. The organic solvent extraction with pure methanol was also conducted for a quantitative comparison with the $scCO_2$ extraction. The recovery of glabridin from licorice was found to be extremely small for pure $scCO_2$. However, the addition of modifiers such as ethanol and acetone to $scCO_2$ resulted in a significant improvement in the recovery of glabridin. The recovery of glabridin was observed to increase with pressure at a constant temperature. Furthermore, the purity of the glabridin obtained from the $scCO_2$ extraction was higher compared with the organic solvent extraction.