• Korean Journal of Mathematics
• /
• 제27권3호
• /
• pp.691-705
• /
• 2019

In the present paper is to classify Beta-almost (${\beta}$-almost) Ricci solitons and ${\beta}$-almost gradient Ricci solitons on almost $CoK{\ddot{a}}hler$ manifolds with ${\xi}$ belongs to ($k,{\mu}$)-nullity distribution. In this paper, we prove that such manifolds with V is contact vector field and $Q{\phi}={\phi}Q$ is ${\eta}$-Einstein and it is steady when the potential vector field is pointwise collinear to the reeb vectoer field. Moreover, we prove that a ($k,{\mu}$)-almost $CoK{\ddot{a}}hler$ manifolds admitting ${\beta}$-almost gradient Ricci solitons is isometric to a sphere.

• 대한수학회논문집
• /
• 제37권1호
• /
• pp.213-228
• /
• 2022

In the present paper, we aim to study Yamabe soliton and Riemann soliton on Lorentzian para-Sasakian manifold. First, we proved, if the scalar curvature of an 𝜂-Einstein Lorentzian para-Sasakian manifold M is constant, then either 𝜏 = n(n-1) or, 𝜏 = n-1. Also we constructed an example to justify this. Next, it is proved that, if a three dimensional Lorentzian para-Sasakian manifold admits a Yamabe soliton for V is an infinitesimal contact transformation and tr 𝜑 is constant, then the soliton is expanding. Also we proved that, suppose a 3-dimensional Lorentzian para-Sasakian manifold admits a Yamabe soliton, if tr 𝜑 is constant and scalar curvature 𝜏 is harmonic (i.e., ∆𝜏 = 0), then the soliton constant λ is always greater than zero with either 𝜏 = 2, or 𝜏 = 6, or λ = 6. Finally, we proved that, if an 𝜂-Einstein Lorentzian para-Sasakian manifold M represents a Riemann soliton for the potential vector field V has constant divergence then either, M is of constant curvature 1 or, V is a strict infinitesimal contact transformation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권4호
• /
• pp.554-562
• /
• 2006

Two lines of mice, M16 selected for rapid growth and a randomly selected control ICR as well as their reciprocal crosses were used to study the effects of genotype on whole-body energetics and intestinal responses to monensin. Six mice, eight weeks of age, from each line or reciprocal cross were assigned to one of two treatments, 1) drinking water containing 20 mmol/L monensin dissolved in 0.5% V/V ethanol, and 2) drinking water containing 0.5% V/V ethanol (control) for two weeks. After 11 days (age of 9 weeks and 4 days), whole-body $O_2$ consumption was measured. At the end of two weeks, jejunal $O_2$ consumption, intestinal tissue composition and histomorphometrics as well as the rate and efficiency of glucose absorption were estimated. In comparison with the control, monensin administration in drinking water resulted in less daily water intake (13.4 vs. 15.5 ml/mouse, p<0.01), less protein to DNA ratio of jejunal mucosa (5.41 vs. 6.01 mg/mg, p<0.05), lower villus width (88 vs. $100{\mu}m$, p<0.05), and less jejunal tissue $O_2$ consumption enhancement by alcohol (7.2 vs. 10.5%, p<0.01) in mice. Other than those changes, monensin had little (p>0.05) effect on variables measured in either line of mice or their reciprocal cross. In contrast, the M16 line, selected for rapid growth, as compared to the ICR controls or the reciprocal crosses, had less initial (pre-monensin treatment) whole-body $O_2$ consumption per gram of body weight (1.68 vs. $2.11-2.34{\mu}mol/min{\cdot}g$ BW, p<0.01) as compared to the ICR and reciprocal crosses. In addition, the M16 mice exhibited greater growth (412 vs. 137-210 mg/d, p<0.05), better feed efficiency (41.7 vs. 19.9-29.3 mg gain/g feed, p<0.05), shorter small intestines adjusted for fasted body weight (1.00 vs. 1.22-1.44 cm/g FBW, p<0.05), wider villi (109 vs. $87-93{\mu}m$, p<0.05), more mature height of enterocytes (28.8 vs. $24.4-25.1{\mu}m$, p<0.05) and a lower rate (91 vs. $133-145{\eta}mol\;glucose/min{\cdot}g$ jejunum, p<0.05) and less energetic efficiency (95 vs. $59-72{\eta}mol$ ATP expended/${\eta}mol$ glucose uptake, p<0.05) of glucose absorption compared to the ICR line and the reciprocal cross. Monensin had little (p>0.05) effect on whole-body $O_2$ consumption and jejunal function, whilst selection for rapid growth resulted in an apparent down-regulation of intestinal function. These data suggest that genetic selection for increased growth does not result in concomitant changes in intestinal function. This asynchrony in the selection for production traits and intestinal function may hinder full phenotypic expression of genotypic growth potential.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.35-42
• /
• 2011

In this study, ground calcium carbonate (GCC) was modified by Layer-by-Layer (LbL) multilayering with polyelectrolytes. Cationic polyacrylamide (C-PAM) and poly sodium 4-styrene sulfonate (PSS) were used as cationic and anionic polyelectrolytes to modify GCC. The characteristics of the modified GCC were examined in terms of zeta potential and particle size with the addition level of polyelectrolyte and layer number. The GCC could form an assembly of cationic and anionic polyelectrolytes through consecutive adsorption process. The zeta potential of the modified GCC moved toward the cationicity and reached the plateau with the increase of the addition level of C-PAM. With layering of anionic PSS, the GCC had the negative charge. The particle size was dependent on the zeta potential. It was also observed by optical microscope. As the PSS was in the presence of the outermost layer, the GCC showed the better dispersability. It indicated that the surface charge and particle size can be controlled by adjusting the addition level of polyelectrolyte and the layer number.

• Restorative Dentistry and Endodontics
• /
• 제13권2호
• /
• pp.221-235
• /
• 1988

The purpose of this study was to observe characteristic properties through the polarization curves and EMPA images from 4 different types of amalgam obtained by using the potentiostats (EG & G PARC) & EPMA (Jeol JSM-35), to investigate the degree of corrosion of each phase of amalgam on the oxidation peak, and to identify corrosion products from the corroded amalgam by use of X-ray diffractometer(Rigaku). After each amlgam alloy and Hg were triturated as the direction of the manufacturer by means of the mechanical amalgamator(Shofu), the triturated mass was inserted into the cylindrical metal mold which was 12mm in diameter and 10mm in height and was condensed by means of routine manner. The specimen was removed from the mold and stored at room temperature for about 7 days. The standard surface preparation was routinely carried out. Anodic polarization measurement was employed to compare the corrosion behaviours of the amalgams in 0.9% saline solution(pH6.8~7.0) and artificial saliva (pH6.8~7.0) at $37^{\circ}C$. The open circuit potential was determined after 30 minutes' immersion of specimen in electrolyte and the potential scan was begun at the potential of 100mV cathodic from the corrosion potential. The scan rate was 1mV/sec and the surface area of amalgam exposed to the solution was 0.64$cm^2$ for each specimen. All the potentials reported are with respect to a saturated calomel electrode (SCE). EPMA images on the determined oxidation peaks of each amalgam in artificial saliva were observed. X-ray diffraction patterns of each sample were recorded before and after polarization in artificial saliva (Aristaloy, Caulk Spherical, Dispersalloy and Tytin: at +770mV, +585mV, +8.10m V and +680m V respectively) by use of a recording diffractometer. Nickel filtered Cu $K_{{\alpha}_1}$ radiation was used and sample was scanned at $4^{\circ}(2{\theta})/min.$ from $25^{\circ}$ to $80^{\circ}$. The following results were obtained. 1. Oxidation peak potential in artificial saliva shifted to more anodic direction than that in saline solution. 2. The corrosion potential of high copper amalgam was more anodic than the potential of low copper amalgam. 3. The current density was lower in artificial saliva than in saline solution. 4. One of the corrosion products, AgCl was identified by X-ray diffraction analysis. 5. ${\gamma}_2$ phase was the most susceptible to corrosion and e phase was stable in low copper amalgam and ${\eta}$' phase and Ag-Cu eutectic were susceptible to corrosion in high copper amalgam.

• Korean Chemical Engineering Research
• /
• 제51권4호
• /
• pp.418-425
• /
• 2013

고정층 반응기를 사용하여 상압에서 에탄올로부터 방향족화합물 제조에 관한 ZSM-5 제올라이트의 금속성분 및 실리카/알루미나 비의 영향을 고찰하였으며, 반응온도, 중량공간속도(WHSV), 반응물인 에탄올에 물 및 메탄올 첨가 영향도 검토하였다. 촉매로는 Si/$Al_2$ 비율이 23~280 범위의 상용 ZSM-5에 Zn, La, Cu, Ga 성분을 함침시켜 촉매 활성 및 안전성 테스트에 사용하였다. 촉매의 특성분석을 위해 암모니아 승온탈착 실험($NH_3$-TPD)과 질소 흡-탈착실험을 수행하였다. 실험결과, 방향족화합물의 선택도에 관한 ZSM-5에 함침한 금속성분과 ZSM-5의 Si/$Al_2$비에 크게 영향을 받았는데, 함침금속은 Zn-La > Zn > La > Cu > Ga 순으로 감소하였으며, ZSM-5의 적절한 산점을 가진 Si/$Al_2$=50, 80에서 가장 우수하였다. 최적 반응온도($437^{\circ}C$)와 공간속도($0.8h^{-1}$)에서 방향족화합물의 선택도는 초기 72%에서 30시간 이후 56%로 서서히 감소하는 경향을 나타내었다.

• 한국해양공학회지
• /
• 제6권1호
• /
• pp.43-51
• /
• 1992

The hydrodynamic performance of a floating-type OWC (Oscillating Water Column) chamber is studied numerically and experimentally in this study. The numerical approach based on two-dimensional linear theory of floating wave absorber was attempted to design an efficient wave energy absorber, while model test was performed in a wave basin to test a performance of designed model and validate the reliability of developed numerical code. The focus of study is placed mainly on the experimental study to evaluate the principal characteristics of the designed OWC chamber in regular waves. The effects of the variation of wave height on OWC device and of air pressure inside chamber are also presented. Finally, the measured results were compared with computed ones, and it was shown that the designed chamber works with high efficiency $(\eta_H>1$ over most of wave lengths covered by present study. It is therefore concluded that the developed code is capable of being successfully employed to design OWC chambers at various ocean environments, even though there exist some minor discrepancies between measured and computed results.

• 생약학회지
• /
• 제48권3호
• /
• pp.187-194
• /
• 2017

Peptidoglycan in inserts and mammals is well known to improve biological functions in the host's immune system. However, it is unclear how Peptidoglycan exerted its anti-inflammatory capacity especially in clam worm (Marphysa sanguinea). In this experiment, the anti-inflammatory and antioxidant effects of clam worm extract treated with (PCWE) peptidoglycan (Micrococcus luteus) in RAW264.7 cells were examined by measuring MDA, catalase, SOD, GSH-Px and inflammatory cytokines (nitric oxide, iNOS, interleukin-$1{\beta}$ and tumor necrosis factor-${\alpha}$). PCWE significantly increased the activities of catalase, SOD and GSH-Px and decreased the level of MDA. Interestingly, PCWE induced activities of SOD and GSH-Px more than clam worm extract without peptidoglycan (CWE). In addition, PCWE decreased NO production, iNOS, COX-2, TNF-${\alpha}$ and IL-$1{\beta}$ better than CWE. Taken together, these results indicate that PCWE has the potential as a natural antioxidant and a therapeutic for inflammation-related diseases.

• 대한화장품학회지
• /
• 제23권2호
• /
• pp.71-96
• /
• 1997

We have used a novel liquid surface forces apparatus to determine the variation of disjoining pressure with film thickness for dodecane-water-dodecane emulsion films. The LSFA allows measurement of film thicknesses in the range 5-100 nm and disjoining pressure from 0-1500 Pa. Disjoining pressure isotherms are given for films stabilised by the nonionic surfactnat n-dodecyl pentaoxyethylene glycol ether$(C_{12}E_5)$ and n-decyl-$\beta$-D-glucopyranoside($C_{10}- $\beta$-Glu)$ and the anionic surfactant sodium bis(2-ethylhexyl) sulphosuccinate(AOT) in the presense of added electrolyte. For $C_{12}E_5$ and AOT, the emulsion films are indefinitely stable even for the highest concentration of NaCl tested (136.7 Nm) whereas the $C_{10}-{eta}-Glu$ film shows coalescence at this salt concentration. For film thicknesses greater than approximately 20 nm with all three surfactants, the disjoining pressure isotherms are reasonably well described in terms of electrostatic and van der Waals, forces. For the nonionic surfactant emulsion films, the charge properties of the monolayers are qualitatively similar to those seen for foam films. For AOT emulsion films, the monolayer surface potentials estimated by fitting the isotherms are similar to the values of the zeta potential measured for AOT stabilised emulsion droplets. For thin emulsion films certain systems showed isotherms which suggested the presence of an additional repulsive force with a range of approximately 20 nm.

• 한국수소및신에너지학회논문집
• /
• 제24권5호
• /
• pp.421-427
• /
• 2013

We report on the time dependent degradation of cell in dye-sensitized solar cells (DSSC). The photovoltaic performance of DSSC over a period of time was investigated in liquid electrolyte based on triiodide/iodide during six days. It was found that the short circuit current density ($j_{sc}$) of the cell dropped from 9.9 to $7mA/cm^2$ while efficiency (${\eta}$) of the cell decreased from 4.4 to 3.3%. The parameters corresponding to fundamental electronic and ionic processes in a working DSSC are determined from the electrochemical impedance spectrascopy (EIS) at open-circuit potential ($V_{oc}$). EIS study of the DSSC in the this work showed that the electron life time ${\tau}_r$ and chemical capacitance $C_{\mu}$ decreased significantly after six days. It was correlated the $j_{sc}$ and efficiency decreased after six days.