• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1799-1810
• /
• 2011

Origin-Destination(OD) trip survey being used in travel demand forecasting has been obtained through totalizing process with direct sample survey techniques such as plate license survey, roadside interview, household travel survey, and cordon line counts. However, the OD survey has many discrepancies in sampling, totalizing process, and such discrepancies contains problems of difference between forecasted traffic volume and observed data. On the other hand, transit smart card data recently collected has credible resource of obtaining travel information for bus and metro. This paper presents parameter estimation of gravity model by using transit smart card data. Through the parameter estimation method, we estimated =0.57, ${\beta}$=0.14 of gravity model for bus, and ${\alpha}$=-0.21, ${\beta}$=0.05 for metro. The statistical test such as T-test, coefficient of correlation, Theil`s inequality coefficient showed no difference between observed volume and estimated volume. Elasticities of bus and metro derived in this paper are also reasonable.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.22-32
• /
• 2013

Since the percentage of vehicles equipped with Hi-pass, an electronic toll collecting device, has increased rapidly, it is very crucial to determine the optimal location of Hi-pass lanes at a toll plaza in terms of traffic control and operation. In this study, the appropriateness of existing Hi-pass lanes of a toll plaza is evaluated considering its physical geometry and traffic characteristics. A new evaluating criterion called "traffic dispersion rate" is developed in order to measure the level of traffic spreading across the toll booth lanes at a toll plaza. Logistic regression models are constructed to estimate the relationship between the traffic dispersion rate and its affecting variables. The model estimation results show that several variables including Hi-pass lane traffic volume, length of toll plaza, entering/exiting taper lengths, and locations of Hi-pass lanes. The results also suggest that traffic dispersion rate can be increased by adjusting the location of Hi-pass lanes. The study enables us to quantify traffic dispersion rate which can be used to optimize the location and operation of Hi-pass lanes at toll plazas.

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.57-62
• /
• 2014

PURPOSES : Capacity is a main factor of determining the number of lane in highway design or the level of service in road on operation. Previous studies showed that breakdown may occur before capacity is reached, and then it was concluded that capacity is a stochastic value rather than a deterministic one. In general, estimating capacity is based on average over maximum traffic volume observed for capacity state. This method includes the empirical distribution method(EDM) and would underestimate capacity. This study estimated existing empirical methods of estimating stochastic highway capacity. Among the studied methods are the product limit method(PLM) and the selected method(SM). METHODS : Speed and volume data were collected at three freeway bottleneck sites in Cheonan-Nonsan and West Sea Freeway. The data were grouped into a free-flow state or capacity state with speeds observed in the bottlenecks and the upstream. The data were applied to the empirical methods. RESULTS : The results show that the PLM and SM estimated capacity higher than EDM. The reason is that while the EDM is based on capacity observations only, the PLM and SM are based on free-flow high volumes and capacity observations. CONCLUSIONS : The PLM and SM using both free-flow and capacity observations would be improved to enhance the reliability of the capacity estimation.

• Geomechanics and Engineering
• /
• v.21 no.2
• /
• pp.95-102
• /
• 2020

Population concentration in urban areas has led traffic management a central issue. To mitigate traffic congestions, the government has planned to construct large-cross-section tunnels deep underground. This study focuses on estimating the damage caused to frame structures owing to tunnel excavation. When constructing a tunnel network deep underground, it is necessary to divide the main tunnel and connect the divergence tunnel to the ground surface. Ground settlement is caused by excavation of the adjacent divergence tunnel. Therefore, predicting ground settlement using diverse variables is necessary before performing damage estimation. We used the volume loss and cover-tunnel diameter ratio as the variables in this study. Applying the ground settlement values to the settlement induction device, we measured the extent of damage to frame structures due to displacement at specific points. The vertical and horizontal displacements that occur at these points were measured using preattached LVDT (Linear variable differential transformer), and the lateral strain and angular distortion were calculated using these displacements. The lateral strain and angular distortion are key parameters for structural damage estimation. A damage assessment chart comprises the "Negligible", "Very Slight Damage", "Slight Damage", "Moderate to Severe Damage", and "Severe to Very Severe Damage" categories was developed. This table was applied to steel frame and concrete frame structures for comparison.

• Journal of Radiation Protection and Research
• /
• v.32 no.2
• /
• pp.79-88
• /
• 2007

When an accident occurs at nuclear power plant and radionuclide material is released to the area around the plant, public evacuation is considered as a measure to protect the safety of the residents nearby. This study draws factors required to estimate evacuation time and make estimation of the time to evacuate all residents from the EPZ of Wolsong site in consideration of traffic condition in the neighborhood and on the basis of field data around the site for each factor. The traffic capacity and the traffic volume by season were investigated for the traffic analysis and simulation within EPZ of Wolsong site. As a result, the background traffic volume by season were established. To estimate TGT(Trip Generation Time), the questionnaire surveys were carried out for resident and transient. The TSIS code was applied to traffic analysis in the events of daytime/night and normal/adverse weather under normal day/summer peak traffic condition. The results showed that the evacuation time required for total vehicles to move out from EPZ took generally from 118 to 150 minutes. The evacuation time took longer maximum 17 minutes at night than daytime during summer peak traffic.

• Journal of Korean Society of Transportation
• /
• v.21 no.3
• /
• pp.121-134
• /
• 2003

Forecasting models for crosswalk pedestrian volume, which consider safety of crosswalks and good traffic operation accidents, have been established in order to reduce total number of crosswalk pedestrian accidents. However, the existing models did not include pedestrian volume which seemed to be very significant in the forecasting models because there were no pedestrian volume related data and no methods of estimating pedestrian volume. This paper presents estimating models for the total number of trips, which are produced in zone i and attracted to zone j, and a process of estimating pedestrian volume in the goal year. First of all, the estimating models included the characteristics of land-use around a signalized intersection and the crosswalk pedestrian volume as factors. Secondly, the estimated crosswalk pedestrian volume was distributed to the crosswalk pedestrian volume each path in the basic year by friction factors of Gravity Model, adjustment factors for area and ratio of pedestrian volume who moved diagonally at the crosswalk. Thirdly, the estimating models of crosswalk pedestrian volume in the goal year were presented by using the distributed crosswalk pedestrian volume.

• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.115-126
• /
• 1999

Past nears many Studies have been described for present state and forecasted for the future phenomena in various areas. Many theories and methodologies in transportation have been developed and applied by researchers and planners. On the other hand, many theories and methodologies had disappeared caused by their critical limitations. One of this cause that was discovered of the Chaos in traffic flows. The occurrence of Chaos in traffic flows has affected to the traffic volume and decreased significancy of a simulation result of a specific traffic flow. According to this fact, long-term forecast of traffic flow is difficult, moreover a butterfly effect impedes development and establishment of transportation model. A methodology to solve Chaos character in traffic flow can be able to provide more effective transport planning. This study tackles to enhance and revise the existing theories for the traffic flow applying Chaos theory to estimating travel time.

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.567-578
• /
• 2014

The study suggested a method to improve analysis accuracy such that the interactive effects of transportation changes between outside and inside of sub-areas were sequentially considered in the analysis by linking a macroscopic network analysis and a microscopic traffic simulation. A dynamic O/D estimation method was developed for practical implement of sub-area microscopic simulation analysis by using the results of macroscopic network analysis, the results of selected link analysis at the cordon line of the sub-area, departure time data of household travel survey, timely observed traffic volume data at the cordon. This estimated dynamic O/D for the sub-area made it possible to analyze traffic phenomena in details. Various detailed phenomena such as traffic queues, delay at intersection, and conflicts between vehicles, which is impossible to be grasped through a macroscopic analysis, can be analyzed with the dynamic microscopic traffic analysis. Through implementing an empirical study and validation, the study provided a reference result about accuracy of a microscopic traffic simulation of a sub-area to help its application for real transportation policy analysis.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.4
• /
• pp.132-152
• /
• 2017

Network performance measure has been more and more important in transportation sector because traffic congestion has been steadily increasing in urban area. VKT is defined a sum of traveled distances of whole vehicles on the road network and one of the most important measure of effectiveness (MOE) for network performance measure. This paper aims to propose a methodology for estimating VKT and to apply it to calculate VKT in 6 major cities in Korea. We calculate VKT in 6 major cities by estimating traffic volumes on the uncollected road sections using regression kriging. It is expected that the proposed methodology can be applied various cities.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.2
• /
• pp.80-93
• /
• 2018

Public transit services are generally analyzed based on the correlation of demand and supply. The computation of supply uses accessibility while demand uses travel demands estimation based on residential population. However, the traditional demand estimation has a limitation in analysing in micro-scale compared to the smartcard data traffic. This study analyzed potential improvement of public transit services using smartcard traffic data. The supply of transportation was defined using time distance accessibility. Also, time loss was calculated in those origin destination(OD) pairs where time distance accessibilities are relatively low. The proposed method was applied at Seoul. The results showed that the areas where OD pairs need improvement include Seodaemun-gu, Guro-gu and Nowon-gu.