• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.1
• /
• pp.77-85
• /
• 2001

본 연구에서는 차량하중에 의한 상시진동기록을 이용한 교량의 손상추정기법을 연구하였다. 즉, 차량진행 중 측정된 신호로부터 구조물의 모드특성을 구하고, 이를 이용하여 손상위치 및 손상정도를 추정하는 알고리즘을 제안하였다. 제안기법의 검증을 위하여 차량하중을 재하할 수 있는 모형교량을 제작하여 손상실험을 수행하였다. 차량진행 중 교량의 수직가속도를 계측하였으며, 측정된 가속도시계열로부터 random decrement(RD) 기법을 사용하여 자유진동신호를 구한 후, 이로부터 구조물의 모드특성을 추정하였다. 추정된 모드특성을 기초로 신경망기법을 적용하여 손상위치 및 손상정도를 추정하였으며, 추정된 결과는 실제 손상과 비교적 잘 일치하였다.

• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.95-101
• /
• 2011

This study proposes the accident estimation model developed based on the time-series cross-sectional data at 50 intersections in Cheongju. The data were collected repeatedly and accumulated from 2004 to 2007. This study focused on deriving the optimal among the various models including TSCSREG(Time Series Cross Section Regression). Four different models utilizing various elements affecting accidents were developed. Through a statistical test, it was found that the t values of independent variables of the fixed effect models were less than those of the random effect models. Two variables were then found to be positive to the accidents: the number of crosswalks at an intersection and the number of intersections.

• Journal of KIBIM
• /
• v.6 no.2
• /
• pp.29-38
• /
• 2016

Road bridges are deteriorating gradually, and it is forecasted that the number of road bridges aging over 30 years will increase by more than 3 times of the current number. To maintain road bridges in a safe condition, current safety conditions of the bridges must be estimated for repair or reinforcement. However, budget and professional manpower required to perform in-depth inspections of road bridges are limited. This study proposes an estimation model for safety rating of road bridges by analyzing the data from Facility Management System (FMS) and Yearbook of Road Bridges and Tunnel. These data include basic specifications, year of completion, traffic, safety rating, and others. The distribution of safety rating was imbalanced, indicating 91% of road bridges have safety ratings of A or B. To improve classification performance, five safety ratings were integrated into two classes of G (good, A and B) and P (poor ratings under C). This rearrangement was set because facilities with ratings under C are required to be repaired or reinforced to recover their original functionality. 70% of the original data were used as training data, while the other 30% were used for validation. Data of class P in the training data were oversampled by 3 times, and Repeated Incremental Pruning to Produce Error Reduction (RIPPER) algorithm was used to develop the estimation model. The results of estimation model showed overall accuracy of 84.8%, true positive rate of 67.3%, and 29 classification rule. Year of completion was identified as the most critical factor on affecting lower safety ratings of bridges.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.159-168
• /
• 2002

The Highway Capacity Manual(HCM) suggests estimating the average green time for the performance evaluation of the traffic actuated operation and Provides the average green time estimation model. However, the model provides with much room for improvements. This document proposes a new analytical model that overcomes the shortage of the HCM model. The average green times estimated by the HCM model and the proposed model were compared. A computer program using the proposed model was coded for the study, while the ACT348 program was used for the implementation of the HCM model Through the comparison study based on the 1,196 hypothetical simulation data surrogating field data, it was found that the average green times estimated by the proposed model yields much nicer one-to-one linear relationship to the simulation results than the ones from the HCM model in both exclusive-only and shared-permitted cases. The R2 values of the proposed and the HCM models with those cases are 0.90 and 0.56, and 0.86 and 0.57, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.29-36
• /
• 2013

This study is the fundamental research to establish evacuation planning and to analyze evacuation planning characteristics in Gumi-city based on existing network and traffic characteristics data. Assuming an emergency situation, it compared with evacuation time estimates between using existing traffic signal system and proposed lane-based routing method through micro simulations. As a result, using existing traffic signal system could not affect the evacuation times in each level of emergency conditions. However this study found that proposed lane-based routing method is very effective to reduce an evacuation time compared with using existing traffic signal system. Also the proposed method is verified to reduce an evacuation time especially in extreme emergency circumstances.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.157-164
• /
• 2012

Road signs serve guide informations for efficient traffic control and are regulated by Road Sign Regulation. But few road managers break the regulation because of civil complaint and cause driver's confusion. Also, as promote the road name guide signs and the new road signs on expressway, the driver's confusion being increased. This study analysis factors of driver's confusion, calculates limited information on road signs and specifies modes of driver's confusion caused by road signs. The traffic accident data during 3 years is calculated in order to see how much intimate connection between the road sign confusion and the traffic.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.1 s.15
• /
• pp.13-25
• /
• 2000

Road traffic-related environment problems has become now serious problem common in the urban life throughout the world. In this study, a GIS-supported evaluation system has been developed for dealing with the road traffic-related environment problems, especially focusing on air Pollution in the urban areas. The developed system consists lof three essential parts: GIS; traffic-related air pollution simulation model; and the database for potential strategies. In establishing the simulation model, a GIS-supported environment can provide a useful tool for handling a wide range of data characterizing study areas and for preparing more accurate estimation on real locations. Such roles of the GIS-supported system can be helpful to more efficient analysis and more reasonable decision-makings. As a preliminary stage in developing the system, the metropolitan area of Cairo in Egypt was applying into being as a Pilot study to test the Potentiality of the prototype system.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.21-40
• /
• 2003

A traffic accident analysis method was developed and tested based on the highway alignment risk indices using geographic information systems(GIS). Impacts of the highway alignment on traffic accidents have been identified by examining accidents occurred on different alignment conditions and by investigating traffic accident risk indices(TARI). Evaluative criteria are suggested using geometric design elements as an independent variable. Traffic accident rates were forecasted more realistically and objectively by considering the interaction between highway alignment factors and the design consistency. And traffic accident risk indices and risk ratings were suggested based on model estimation results and accident data. Finally, forecasting traffic accident rates, evaluating the level of risk and then visualizing information graphically were combined into one system called risk assessment system by means of GIS. This risk assessment system is expected to play a major role in designing four-lane highways and developing remedies for highway sections susceptible to traffic accidents.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.11
• /
• pp.1035-1043
• /
• 2004

For a long road tunnel, a tunnel ventilation system may be used in order to reduce the pollution level below the required level. To control the tunnel pollution level, a closed loop control algorithm may be used. The feedforward prediction algorithm and the cascade control algorithm were developed to regulate the CO level in a tunnel. The feedforward prediction algorithm composed of the traffic estimation algorithm and the CO density prediction algorithm, and the cascade control algorithm composed of the jet fan control algorithm and the air velocity setpoint algorithm. The verification of control algorithms was carried out by dynamic models developed from the actual tunnel data. The simulation results showed that control algorithms developed for this study were effective for the control of the tunnel ventilation system.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1070-1081
• /
• 1996

In this research, a model was developed for estimating the queue length of vehicles, based on occupancy time of each vehicle collected by loop detectors which were setup at the upstream of urban street. The estimation model suggestes a method which minimizes architectural effects of the street, such as existence of pedestrian crossing, for future applications to the field. The estimation model suggested in this research was established based on real traffic data collected at up-stream detectors in Kangnam Subway station, Seoul, and the formula of the model is based on Multi-Polynomial equations. Consequence of the experiments showed that the model can adequately and in real-time mode measure length of the queue which were constructed at the 80 to 90 meters away from the upstream detectors. The estimation accuracy of the model was verified in statistical analysis conducted by regressing analysis and test results in real traffic situation.