• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.4
• /
• pp.70-75
• /
• 2009

According to the aviation statistics, tail strike incidents and accidents are cyclic. Although many tail strikes occurred during takeoff, these are less than during landing cases. Many cases are related on human factors. In my opinion it is possible to analyze the causes of takeoff tail strikes to some extent. There are major casual factors of tail strike during takeoff such as; (1) Mis-trimmed horizontal stabilizer (2) premature rotation prior to $V_R$ (3) Excessive pitch up rate during rotation (4) Improper use of the flight director. Among these causes improper use of flight director is excluded in this paper because it is recommended that pilot should use flight director after airborne. So I analyzed the other three causes as following. Firstly, because mis-trimmed stabilizer is related to center of gravity(CG), the relationship between stabilizer and CG is reviewed. Secondly, concerned premature rotation prior to $V_R$ I reviewed the background of rotation speed($V_R$) establishment and analyzed theoretically what speed leads to tail strikes. Thirdly, concerning excessive pitch up rate during rotation I analyzed what excessive pitch up rate can decrease ground clearance while using FDR data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.333-344
• /
• 1999

Currently many studies on the unmanned gantry crane for the automated container terminal are accomplished. This is needed for the development of large scale, automation, high speed, unmanned system and information system in port facility. In order to do efficient container handling job in port yard, the automated handling system is well adapted to the job environments and all-season weather, In order to realize the automatic and unmanned system for container handling job, the required functions and main structure system are studied. The major problems of operation of the conventional gantry crane are that the vibration of gantry structure body is occurred by operation and that high-speed and precision position-velocity control and the capability to dope to the external disturbances caused by the wind, rain, fog and job environments. In this paper, the fundamental study for establishment of the concept and the dynamic modelling of the major sub system of the unmanned gantry crane is presented. These studies are useful for design and manufacturing of the new concept model of the unmanned gantry crane for efficient operation of the automated container terminal.

• Journal of the Korean Society for Railway
• /
• v.17 no.1
• /
• pp.59-69
• /
• 2014

Recently, the building of an intermodal transportation system has become the most important policy in the establishment of a national-wide sustainable transport system. In the case of rail and public transport, an intermodal connecting improvement policy is essential due to the lack of trip completeness. In particular, high-speed rail has brought dramatic changes to the transportation system in Korea and the idea of high-speed rail stations as major transportation nodes to be linked to various travel modes needs to be analyzed in terms of an intermodal network. Thus, this study proposes a new connectivity analysis method to objectively and quantitatively evaluate intermodal connecting performance for high-speed rail in terms of an intermodal network around high-speed rail stations. Seoul, Busan, Ulsan, and Sin-gyeongju stations were designated for a range of spatial analyses; detailed connecting performance indexes of travel modes connecting high-speed rail stations, and the influence sphere of these stations are analyzed, except for internal transfer facilities. Finally, this study proposes a connectivity analysis method that applies the structural equation model and develops a connectivity index.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.7
• /
• pp.655-660
• /
• 2007

A canard-leading edge flap deflection scheduling laws have been established to enhance the maneuverability of the canard type fighter class aircraft. These scheduling laws are the relation of canard-leading edge flap deflections and flight conditions to maximize the lift-drag ratio. For these purposes, the corrected supersonic panel method has been used to predict the lift-drag characteristics due to canard-leading edge flap deflections. In addition, the high speed wind tunnel test has been conducted with 1/20 scale model to validate the predicted scheduling laws. Good agreements have been obtained compared with the results of high speed wind tunnel test. Based on the results obtained from the experimental and numerical studies, the corrected supersonic panel method has shown to be useful to establish the canard-leading edge flap deflection scheduling law for the aerodynamic design of canard type fighter class aircraft.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1124-1130
• /
• 2015

Moisture and high temperature are the most important factors that lead to the ageing of oil-paper insulation, but the research about space charge characteristics of oil-paper insulation does not take the combined effect of ambient temperature, moisture and thermal ageing into account. The pulsed electroacoustic (PEA) method was used to investigate the influence of moisture and temperature on space charge characteristics of oil paper at different ageing stages. The results showed that moisture could speed up formation of space charge in oil paper when water concentration was low, but the formation was restrained if the water concentration was high. At the beginning of thermal ageing, heterogeneous charge accumulation had predominance, but it gradually changed to homogeneous charge injection with ageing. It was believed that moisture concentration could speed up ageing and enhance charge accumulation on one hand, and accelerate or slow down the establishment speed of space charge on the other hand, therefore, charge accumulation type changed with ageing. The more seriously the oil-paper insulation was thermally aged, the deeper the trap energy level was, hence more space charge was trapped, which could be speeded up by increasing the ageing temperature, but the effect of ambient temperature did not fit the Arrhenius law.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.117-123
• /
• 2016

High speed circuit breakers(HSCB) interrupt the generated arc within the arc chute to turn off the electricity flowing through the main circuit to prevent ground faults. In order to explore the arc generated from the contactor operation, arc definition, establishment of arc interruption method, and analysis of magnetic driving force are required. In this paper, arc interruption capability has been estimated by exploring the difference in magnetic flux density of Lorenz forces using finite element analysis. In addition, since the number of grids and changes in the grid shape within the arc chute influence the formation of the inner magnetic field, its effects have been explored to enhance arc interruption capability. Assessment of interruption capability and analysis of grid shape, with rated operating current, are reported.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.592-593
• /
• 2021

In July of last year, the Korean version of the New Deal National Report Conference was held in the presence of the President, and the "Korean version of the New Deal Comprehensive Plan" was announced as its core strategy. In the field of education, the "Green Smart Future School" project has been included as one of the top 10 Korean New Deal projects. And last year, due to the spread of non-face-to-face classes due to COVID-19, the demand for ICT technology in front-line education sites rapidly increased. Therefore, In this paper, we examine the problems of the wireless network and wired infrastructure of the classroom in the past, and design wired network infrastructure and wireless network equipment for green smart classrooms with high-speed wireless networks that can be used for non-face-to-face and face-to-face classes, and build them in actual classrooms. An example for the following was presented.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.1
• /
• pp.7-11
• /
• 2015

In this paper, an automatic focusing method has been proposed for speedy and reliable measurement and inspection in industry. It is very difficult to determine focusing step size and moving direction in one camera autofocusing. The proposed method can improve speed and accuracy of focusing by using the optical axis interval of two cameras, which is automatically set up as focusing step size. Also, it can determine moving direction from focus value comparisons of two cameras, and then solve ambiguity of one camera focusing. Its performance is verified by experiments. It is expected that it can apply to optical system for measurement and inspection in industry fields.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.3
• /
• pp.15-20
• /
• 2008

At the choice of aviation company, safety appears as biggest variable than expenses, speed and comfort so these are concerned not only aviation companies but also countries and customers. Until now, ICAO has been making effort to reduce the flight accident through the safety advice of aviation part, establishment of standard, education, training and develop of navigation aids. Especially in 2008, they emphasize that the flight accident is reduced through researches and applications about SMS as safety regulation. Important primary factor to give influence about promotion of SMS is practice of organization and for this, to investigate recognition about safety management and culture of members. At point of this, this research analyze the recognition degree about how to manage safety and SMS for pilots an mechanics of Korea.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.3
• /
• pp.131-138
• /
• 1999

Generally, the digital controller has many advantages such as high precision, robustness to electrical noise, capability of flexible programming and fast response to the load variation. In this study, we have established proper mathematical equivalent model of Brushless DC (BLDC) motor and estimated the motor parameter by means of the back-emf measurement as being the step input to the controlled target BLDC motor. And the validity of proposed estimation method is confirmed by the test result of step response. As well, we have designed the reasonable digital controller as a consequence of the root locus method which is obtained from the open-loop transfer function of BLDC motor with hall sensor, and the determination of control gain for variable speed control. Here, revised Ziegler-Nichols tuning method is applied for the proper digital gain establishment, and the system stability is verified by the frequency domain analysis with Bode-plot and experimentation.