• Journal of the Korean Society of Safety
• /
• v.23 no.1
• /
• pp.51-56
• /
• 2008

This study aims to investigate the effect of handle angles of pliers on performances of task completion time and the number of errors, and subjective ratings of preference. For doing this, an experiment was conducted, where 14 subjects of 11 college-age male and three female students participated. In the experiment, plier handles angled at $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, and $40^{\circ}$ were used as independent variable, and the task completion time and the number of errors, and subjective ratings of preference as dependent variables. The subjects were instructed to do two tasks of bending an iron plate by $90^{\circ}$ and cutting wires. The results revealed that while the performances of task completion time and the number of errors were not statistically different depending upon the handle angles of pliers, the subjective ratings of preference were significantly different. Based on the results, it is recommended that the pliers with handles bent by $20^{\circ}$ be used in real situations.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.176-181
• /
• 2024

The desktop-level 3D printing machines makes it easier for independent designers to produce collectible models. Desktop 3D printers that use FDM (Fused Deposition Modeling) technology usually use a minimum nozzle diameter of 0.4mm. When using FDM printers to make Gunpla models, Thin slice structures are prone to slicing errors, which lead to deformation of printed objects and reduction in structural strength. This paper aims to analyze the printing model that produces errors, control a single variable among the three variables of slice layer height, slice wall thickness and filament type for comparative testing, and find a way to avoid gaps. To provide assistance for using FDM printers to build models containing thin-walled structures.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2589-2596
• /
• 2000

As current manufacturing processes require high spindle speed and precise machining, increasing accuracy by reducing volumetric errors of the machine itself, particularly thermal errors, is very important. Thermal errors can be estimated by many empirical models, for example, an FEM model, a neural network model, a linear regression model, an engineering judgment model, etc. This paper discusses to make a modeling of thermal errors efficiently through backward elimination and fuzzy logic strategy. The model of a thermal error using fuzzy logic strategy overcomes limitation of accuracy in the linear regression model or the engineering judgment model. It shows that the fuzzy model has more better performance than linear regression model, though it has less number of thermal variables than the other. The fuzzy model does not need to have complex procedure such like multi-regression and to know the characteristics of the plant, and the parameters of the model can be mathematically calculated. Also, the fuzzy model can be applied to any machine, but it delivers greater accuracy and robustness.

• Journal of Gifted/Talented Education
• /
• v.26 no.1
• /
• pp.211-230
• /
• 2016

The study aimed to investigate the characteristics of algebraic thinking of the mathematically gifted students and search for how to teach algebraic thinking. Research subjects in this study included 93 students who applied for a science gifted education center affiliated with a university in 2015 and previously experienced gifted education. Students' responses on an algebraic item of a creative thinking test in mathematics, which was given as screening process for admission were collected as data. A framework of algebraic thinking factors were extracted from literature review and utilized for data analysis. It was found that students showed difficulty in quantitative reasoning between two quantities and tendency to find solutions regarding equations as problem solving tools. In this process, students tended to concentrate variables on unknown place holders and to had difficulty understanding various meanings of variables. Some of students generated errors about algebraic concepts. In conclusions, it is recommended that functional thinking including such as generalizing and reasoning the relation among changing quantities is extended, procedural as well as structural aspects of algebraic expressions are emphasized, various situations to learn variables are given, and activities constructing variables on their own are strengthened for improving gifted students' learning and teaching algebra.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.36-39
• /
• 1996

In chemical processes, measurement errors reduce the credibility of information and cause inconsistency in material and energy balances. Because multicomposition flows and temperature measurements make material and energy balances nonlinear equations, data reconciliation becomes a nonlinear constrained optimization problem. In multicomposition processes, if we follow general optimization procedure, the number of measurement variables is so large that data reconciliation requires much computation time. We propose the decomposition procedure to reduce the computation time without the decrease of accuracy of data reconciliation. Decomposition procedure finds global variables, that can reduce the nonlinearity of constraints, and divides two sub-optimization problems. Once we optimize the global variables at upper level, we can easily optimize the remain variables at tower level, We can obtain the short computational time and the same accuracy as SQP optimization method.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.1978-1988
• /
• 2004

Hybrid finite element analysis was used to analyze the influence of bearing stiffness on the static properties of a planetary gear system with manufacturing errors. The effects of changes in stiffness were similar for most of the manufacturing errors. State variables were most affected by the stiffness of the planet ,bearings. Floating either the sun or carrier helps to equal load sharing and minimizes the critical tooth stress. The effects of a floating sun and carrier are similar, but it is not recommended that both float, because this can induce greater critical tooth stress. Planet bearing stiffness should be optimized. Both load sharing and critical tooth stress should be considered to determine optimal bearing stiffness.

• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.4
• /
• pp.105-130
• /
• 2010

Objectives : The purpose of this study was to assess the statistical methods errors used in the journal of Oriental Rehabilitation Medicine(JORM) and to identify the types of errors in statistical analysis. Methods : We reviewed quantitative articles that were published in the JORM from January 2005 through October 2009. Those were not used by statistical analysis such as literature studies, case study, review articles were not included in this analysis. A total of 296 articles was reviewed. We evaluated the adequacy and the validity of the statistical techniques with our checklist established be modified Lee's checklist, and three statistical evaluators assessed together to minimize bias. Results : Of the 222 articles, 213 were used in inferential and descriptive statistics. Of those 80% of articles adopting descriptive and inferential statistics were detected having statistical errors. One articles used 1.7 statistical method unit generally. Most frequently employed statistics were student t-test, one way ANOVA. pearson correlation analysis, Mann-whitney U test, paired t-test, and chi-square test in their order. However, most frequent statistics having errors were similar in order. The most common statistic errors were as follow: 1. absence of normality test, 2. misuse between paired test and unpaired test, 3. wrong choice of repeated measures analysis without consideration of time variables, 4, increase of Type I error by using inappropriate multiple test, 5. inappropriate application of discrete or categorical data instead of continuous data in correlation analysis, 6. poor consideration of basic consumption in chi-square test, 7. confusion between frequency comparison and average comparison, 8. mentioning the statistical technique without using it. Conclusions : We found various mistake or misuses in the applications of statistical methodologies in the articles published in the JORM. Careful consideration of statistical use and review from the specialist of statistics are warranted for improving the quality of JORM.

• Journal of the Korean Chemical Society
• /
• v.56 no.2
• /
• pp.257-263
• /
• 2012

The selection of suitable delignification conditions and optimization of process variables is crucial to the successful operation of chemical pulping processes. Soda pulping of Carpolobia lutea was investigated, as an alternative raw material for pulp and paper production. The process was optimized under the influence of three operational variables, namely, temperature, time and concentration of cooking liquor. Equations derived using a second - order polynomial design predicted the pulp yield and lignin dissolution with errors less than 8% and 11% respectively. The maximum variations in the pulp yield using a second order factorial design was caused by changes in both time and alkali concentration. Optimum pulp yield of 43.87% was obtained at low values of the process variables. The selectivity of lignin dissolution was independent of the working conditions, allowing quantitative estimations to be established between the pulp yield and residual lignin content within the range studied.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.24-32
• /
• 2012

Of many approaches to reduce motion analysis errors, the compensation method of anatomical landmarks estimates the position of anatomical landmarks during motion. The method models the position of anatomical landmarks with joint angle or skin marker displacement using the data of the so-called dynamic calibration in which anatomical landmark positions are calibrated in ad hoc motions. Then the anatomical landmark positions are calibrated in target motions using the model. This study applies the compensation methods with joint angle and skin marker displacement to three lower extremity motions (walking, sit-to-stand/stand-to-sit, and step up/down) in ten healthy males and compares their performance. To compare the performance of the methods, two sets of kinematic variables were calculated using different two marker clusters, and the difference was obtained. Results showed that the compensation method with skin marker displacement had less differences by 30~60% compared to without compensation. And, it had significantly less difference in some kinematic variables (7 of 18) by 25~40% compared to the compensation method with joint angle. This study supports that compensation with skin marker displacement reduced the motion analysis STA errors more reliably than with joint angle in lower extremity motion analysis.

• Journal of Korean Institute of Industrial Engineers
• /
• v.38 no.1
• /
• pp.46-56
• /
• 2012

The purpose of virtual metrology (VM) in semiconductor manufacturing is to predict every wafer's metrological values based on its process equipment data without an actual metrology. In this paper, we propose novelty detection-based reliability estimation models for VM in order to support flexible utilization of VM results. Because the proposed model can not only estimate the reliability of VM, but also identify suspicious process variables lowering the reliability, quality control actions can be taken selectively based on the reliance level and its causes. Based on the preliminary experimental results with actual semiconductor manufacturing process data, our models can successfully give a high reliance level to the wafers with small prediction errors and a low reliance level to the wafers with large prediction errors. In addition, our proposed model can give more detailed information by identifying the critical process variables and their relative impacts on the low reliability.