• Corrosion Science and Technology
• /
• 제11권4호
• /
• pp.129-134
• /
• 2012

UT(Ultrasonic Test), one of the non-destructive tests, is the most common thickness measurement method for evaluating the wear rate in NPPs(Nuclear Power Plants). UT is used widely because it is easy and safe for use. However some amount of error inevitably occurs in attempting to measure the thickness. The error, that could make the thickness data thicker or thinner, may affect estimation of wear rate in pipes. NPPs are composed of a lot of pipes and components. Some of them are tested to check the current status during RFO(Re-Fueling Outage). Reliability analysis of UT is essential for evaluating pipe wear rate and establishing the long-term management plan in NPPs. This paper reviewed the cause of error occurrence and presented the UT data reliability analysis method. Also, this paper shows the application result of reliability analysis to the UT data acquired in NPPs.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.442-446
• /
• 2009

As the railway transportation is getting faster and its operation speed has increased rapidly, its signal control has been complicated. For real time signal processing it is very important to prohibit any critical error from causing the system to malfunction. Today, most of the railroad's controling communications between wayside and train are made in one way. Therefore, by using a forward error correction technique, which receiver can actively correct the signal error, we can increase the performance and the stability of the railroad signaling system. In this paper, we introduce low density parity check(LDPC) that is used by next generation wireless communications and DMB technique. We verified that we can achieve low bit error rate(BER) in high signal to noise ratio(SNR) by using LDPC.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.560-567
• /
• 1998

This paper concerned about a imputed color printed material image in camera to decrease noise and distortion by processing median filtering with input image to identical condition. Also this paper proposed the way of compares a normal printed material with an abnormal printed material color tone with trained a learning of the error back-propagation to block classification by extracting five place from identical block(3${\times}$3) of color printed material R, G, B value. As a representative algorithm of multi-layer perceptron the error Back-propagation technique used to solve complex problems. However, the Error Back-propagation is algorithm which basically used a gradient descent method which can be converged to local minimum and the Back Propagation train include problems, and that may converge in a local minimum rather than get a global minimum. The network structure appropriate for a given problem. In this paper, a good result is obtained by improve initial condition and adjust th number of hidden layer to solve the problem of real time process, learning and train.

• International Journal of Advanced Culture Technology
• /
• 제9권1호
• /
• pp.203-209
• /
• 2021

When carrying out computer programming, the process of checking and correcting errors in the source code is essential work for the completion of the program. Non-computer majors who are learning programming for the first time receive feedback from instructors to correct errors that occur when writing the source code. However, in a learning environment where the time for the learner to practice alone is long, such as an online learning environment, the learner starts to feel many difficulties in solving program errors by himself/herself. Therefore, training on how to check and correct errors after writing the program source code is necessary. In this paper, various types of errors that can occur in a Python program were described, the errors were classified into simple errors and complex errors according to the characteristics of the errors, and the distributions of errors by Python grammar category were analyzed. In addition, a coding learning process to refer error lists was designed to present a coding learning method that enables learners to solve program errors by themselves.

• 대한산업공학회지
• /
• 제14권1호
• /
• pp.1-15
• /
• 1988

DS1 transmission systems use framing bit errors, bipolar violations and code-detected errors to estimate the bit error rate when determining errored and severely errored seconds. Using the coefficient of variation under the memoryless binary symmetric channel assumption, a basic framework to evaluate these estimation schemes is proposed to provide a practical guideline in determining errored and severely errored seconds which are fundamental in monitoring the real-ime error performance of DS1 transmission systems carrying live traffic. To evaluate the performance of the cyclic redundancy check code (CRC), a computer simulation model is used. Several drawbacks of the superframe format in association with real time error performance monitoring are discussed. A few recommendations are suggested in measuring errored and severely errored seconds, and determining service limit alarms through the use of the superframe format. Furthermore, we propose a new robust scheme for determining service limit alarms which take into consideration the limitations of some estimation schemes for the time interval of one second.

• 대한방사선치료학회지
• /
• 제32권
• /
• pp.53-59
• /
• 2020

목 적: 본 연구의 목적은 타깃 용적의 변화에 따라 MLC 로그 파일 기반 소프트웨어(Mobius)와 기존의 팬텀-전리함(ArcCheck) 선량 검증 방법 간에 차이를 비교 분석하는데 목적이 있다. 대상 및 방법: 반지름이 0.25cm, 0.5cm, 1cm, 2cm, 3cm, 4cm, 5cm, 6cm, 7cm, 8cm, 9cm, 10cm까지 총 12개의 球(구) 모양 타깃이 있는 플랜을 생성하고 Mobius와 ArcCheck을 사용한 선량 검증을 각각 3번씩 실시하였다. 조사된 데이터를 점선량 오차값과 감마 통과율(3%/3mm)을 평가지표로 하여 비교 분석하였다. 결 과: Mobius의 점선량 오차값은 반지름 0.25cm에서 -9.87%, 0.5cm에서 -4.39%로 나타났고, 나머지 타깃 용적에서 오차값은 3% 이내로 나타났다. 감마 통과율은 반지름 9cm에서 95%, 10cm에서 93.9%로 나타났고, 나머지 타깃 용적에서는 95% 이상의 통과율을 보였다. ArcCheck에서 점선량 평균 오차값은 모든 타깃 용적에서 2% 내외의 일치율을 보였다. 감마 통과율 역시 모든 타깃 용적에서 98% 이상의 통과율을 보였다. 결 론: 반지름 0.5cm 이하의 작은 타깃이나 반지름 9cm 이상의 큰 타깃에서는 MLC 로그 파일 기반 DQA의 불확실성을 고려하여, 팬텀-전리함 기반 DQA를 상호 보완해서 사용함으로써 점선량, 감마 지표, DVH, 타깃 포함 등의 종합적인 분석으로 선량 전달 검증을 하는 것이 바람직하다고 사료된다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권1호
• /
• pp.8-14
• /
• 2013

A low density parity check (LDPC) decoder provides a most powerful error control capability for mobile communication devices and storage systems, due to its performance being close to Shannon's limit. In this paper, we introduce an efficient overlapped LDPC decoding algorithm using a upper dual-diagonal parity check matrix structure. By means of this algorithm, the LDPC decoder can concurrently execute parts of the check node update and variable node update in the sum-product algorithm. In this way, we can reduce the number of clock cycles per iteration as well as reduce the total latency. The proposed decoding structure offers a very simple control and is very flexible in terms of the variable bit length and variable code rate. The experiment results show that the proposed decoder can complete the decoding of codewords within 70% of the number of clock cycles required for a conventional non-overlapped decoder. The proposed design also reduces the power consumption by 33% when compared to the non-overlapped design.

• 한국군사과학기술학회지
• /
• 제24권2호
• /
• pp.204-210
• /
• 2021

In this paper, we studied a method of wirelessly checking up the POD for captive flight tests which is performed during the development of guided weapons systems. The wireless power transfer module, the power distribution device, and the battery pack were designed to wirelessly power the captive flight test POD, and the communication device was designed to enable wireless communication between the POD and the check-up device. The communication device was designed to enable WiFi, IR communication, and laser diode communication, so that various communication methods could be tested. Through the performance test, it was confirmed that power was stably supplied to the captive flight test POD, and the wireless communication performance was verified by measuring the delay time and error rate. As a result, by using our system the POD check-up for the captive flight test was performed wirelessly and the data of the captive equipment could be obtained effectively.

• 한국통신학회논문지
• /
• 제35권5C호
• /
• pp.423-431
• /
• 2010

본 논문에서는 저밀도 패리티 검사부호의 복호에서 발생하는 트랩핑 세트에 갇힌 오류를 정정할 수 있는 수정 합-곱 알고리즘을 제안한다. 원래 합-곱 알고리즘과는 달리 제안된 방법은 반복복호의 실패 원인이 트랩핑 세트인지를 판단하는 과정과 트랩핑 세트에 갇힌 오류를 정정하는 2단계 복호과정으로 구성된다. 수정 합-곱 알고리즘에서는 트랩핑 세트에 포함된 변수노드를 검색하기 위하여 실패 검사노드 집합과 경판정 비트들의 천이패턴을 이용한다. 그리고 검색된 변수노드의 정보를 반전시킨 다음 합-곱 알고리즘을 수행함으로써 트랩핑 세트에 갇힌 오류를 정정한다. 모의실험 결과 제안된 복호알고리즘은 신호 대 잡음비의 증가에 따라 지속적으로 향상되는 오류성능을 보인다. 따라서 수정 합-곱 알고리즘은 저밀도 패리티 검사부호에서 발생하는 오류마루 현상을 현저히 감소시키거나 거의 제거할 수 있는 것으로 사료된다.

• 한국통신학회논문지
• /
• 제32권8C호
• /
• pp.775-781
• /
• 2007

본 논문에서는 RS(Reed-Solomon) 부호의 소실 복호를 이용한 수정된 PTS(Partial Transmit Sequences) 기법을 제안한다. 송신기에서 서브블록으로 분할된 RS 부호어의 체크 심볼의 일부만을 위상 가중치에 의하여 위상 천이 한다. 수신기에서 위상 가중치에 의하여 수정된 체크 심볼을 소실로 간주하여 수신 부호어를 복호한다. 이렇게 하여 송신기에서 선택된 위상 가중치에 대한 부가 정보를 전송할 필요가 없어진다. 또한 선택된 위상 가중치에 대한 추정 과정이 불필요하므로 수신기 복잡도가 감소한다. 부가 정보의 전송 에러나 위상 가중치의 추정 에러로 인한 성능 저하도 없다. 제안한 PTS 기법의 성능을 평가하기 위해 PAPR의 CCDF(Complementary Cumulative Distribution Function)와 BER(Bit Error Rate)을 기존의 PTS 기법과 비교한다.