• Proceedings of the ESK Conference
• /
• 1995.04a
• /
• pp.16-22
• /
• 1995

The importance of usability evaluation is increasing in developing a new system and product. The current approaches for usability evaluation are: the comparative evaluation to measure usability, and the iterative user interface design to find usability problems. This paper pressents three types of characteristics and a set of criteria for usability evaluation. The methodology for criteria-based quantitative analysis of user interface usability is investigated with a view to measuring usability. The fuzzy weighted-checklist method with linguistic variables is used for quantitatie analysis. This analysis provides a quantitative measure, which reflects the degree of excellence of user interface usability during the design and development phases.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.4
• /
• pp.37-44
• /
• 2008

To design the cockpit of Korean helicopter, anthropometric data for Korean helicopter pilots as a target population is necessary. The present study measured the body sizes of Korean helicopter pilots to design the cockpit of Korean helicopter, and compared the measurements with those of Korean civilian and the US Army. The sample size was 100 which determined by a statistical analysis. Anthropometric measurements were collected for 100 samples (male = 94, female = 6; age group = 20~40) of Korean helicopter pilots by applying standard measurement protocol. To compare three anthropometric data, Korean civilian and US Army data were controlled by considering age group (20~40) and gender ratio (male: female = 9:1) of Korean helicopter pilots. The average body sizes of Korean helicopter pilots were mostly similar to those of Korean civilian, however, lower limb related variables (hip breadth, popliteal height and thigh clearance) and shoulder-to-elbow length were significantly greater (1~7%) at α=0.05. Furthermore, the average body sizes for Korean helicopter pilots regarding lower limb length and thickness were significantly smaller than those of the US Army (1~12%); however, the average body sizes for Korean helicopter pilots regarding upper body related variables (sitting height, sitting eye height, and acromial height) and hip breadth were significantly greater (0.7~1.9%). Lastly, size variability for Korean helicopter pilots was significantly smaller than those of Korean civilian and the US Army. Anthropometric data for Korean helicopter pilots of the present study was applied to design and evaluate a Korean helicopter cockpit.

• Archives of design research
• /
• v.19 no.3 s.65
• /
• pp.195-206
• /
• 2006

Design for improved usability is to understand products from the user's point of view so eventually to enhance the pleasantness users by reflecting it into the design. The philosophy of user-oriented design is an essence of human-centered product planning, and its application is more important for railway vehicle design, which is closely connected with everyday life. This study focused to define basic elements of train interior design concept, which considers convenience and comfort for passengers, by extracting and interpreting ergonomic requirements, as usability factors, of train toilet design. The study on user-oriented design of trains consists of the practice of sensibility engineering for the management of customers' emotions and its harmonious use on design, and aims on the embodiment of new ergonomic design. In the center, it has analyzed the criteria and characteristics of the user-oriented design and has concluded the design direction and components to a concrete idea and proposed prototypes, which may become a good example for train interior design later on. In addition, it proposes a direction, which may become a guideline of ergonomic design, to secure competition capacity. Moreover this study is concentrated on the physical environment and human behavior of train toilet users, on the analysis of factors necessary for adequate toilet design, and on the understanding of interface between its users. What is more, it proposes a module of development process and methods of approaching the interface. The study presents a design standard, under which the concrete data of the characteristics and practicable range and the convergent demands accelerate to the module could be confirmed and criticized. The study on the usability is going to contribute to more pleasant and comfortable train environments and consequently, it's going to create new values of increased railway competitiveness by design.

• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.19.1-24
• /
• 1998

Designers often hesitate to decide the shape, size, and layout of a product. Though ergonomic principles and data are absolutely needed in this process, they don't have enough guidelines to refer. For the refrigerator designers, they also are not convinced of their decision: the vertical position of the freezing and refrigerating rooms, the height of shelves, the shape of door-handle, and etc. To support the refrigerator design, we applied several ergonomic methods to the evaluation of a refrigerator. EMG measurement was used to evaluate the load of user's lumbar muscle. Based upon the experimental EMG data, we developed a model to predict the relative load according to the height of refrigerator shelves. Two different layouts of a refrigerator, R/F and F/R style, were compared with the model. A three-dimenaional motion analysis method was used to evaluate the user's motion of using a refrigerator. Ten door-handles with the different shapes and positions were evaluated by tracking the rotations of the user's arm. Video protocol analysis was used to evaluate the user interface of a control panel in a refrigerator. Finally, we made several ergonomic design guidelines based on the facts found in this research and the anthropometric data of the Korean adults. The results of this study can be applied to the ergonomic design of a refrigerator.

• Journal of the Korea Furniture Society
• /
• v.25 no.4
• /
• pp.304-318
• /
• 2014

Bed for elderly and disabled, including the United States developed the industry Americas, and European countries, mainly in the production of products has dominated the world market. In large hospitals, and dependent products are sold at high prices. On the other hand, improvement of living standards of our country and to the advancement of residential culture of the demand for luxury products is increasing. The study of elderly Edition mattresses have been developed mainly in Europe to maximize the use of sleep can increase the efficiency of products has been studied. Due to the increase in elderly population Elderly Hospital, which is installed in the elderly silver town Edition requires the dissemination of the mattress in the bedroom several times a day resting and sleeping, eating, etc. Designing a variety of actions are needed. Edition of the elderly in Korea developed the design of bed with bed design and the manufacturer and the Institute for Ergonomics, welfare agencies and to build organic cooperation system under the direction of a professional designer to develop and you need to configure the space and the results of such actions by the distribution of cheap materials, ergonomic mattress for optimal development of behavior analysis to the need to promote the convenience of the user.

• Journal of the Korea Furniture Society
• /
• v.24 no.2
• /
• pp.191-207
• /
• 2013

Bed for elderly and disabled, including the United States developed the industry Americas, and European countries, mainly in the production of products has dominated the world market. In large hospitals, and dependent products are sold at high prices. On the other hand, improvement of living standards of our country and to the advancement of residential culture of the demand for luxury products is increasing. The study of the elderly Edition mattresses have been developed mainly in Europe to maximize the use of sleep can increase the efficiency of products has been studied. Due to the increase in elderly population Elderly Hospital, which is installed in the elderly silver town Edition requires the dissemination of the mattress in the bedroom several times a day resting and sleeping, eating, etc. Designing a variety of actions are needed. Edition of the elderly in Korea developed the design of bed with bed design and the manufacturer and the Institute for Ergonomics, welfare agencies and to build organic cooperation system under the direction of a professional designer to develop and you need to configure the space and the results of such actions by the distribution of cheap materials, ergonomic mattress for optimal development of behavior analysis to the need to promote the convenience of the user.

• Journal of the Korean Home Economics Association
• /
• v.44 no.4 s.218
• /
• pp.133-144
• /
• 2006

The contemporary period is called "the age of sensibility" in which each individual consumer seeks to have her or his own products. Businesses are in need of design developments with an emphasis on customer sensitivity, and at the same time consumers must understand their own sensitivity to acquire information on designs that suit them. This research established a sensitivity and configuration database on designing men's jackets using the sensitivity engineering approach to clothing design information. The user interface was created on the Internet. Sixty-seven sensitivity terms of vocabulary appropriate for the assessment of men's jacket design were selected, and the different designs were classified into six items and 24 categories. Thirty men's jackets with different designs were produced for sensory testing and the results were analyzed in accordance with general linear I statistics. A sensitivity database was established for each category. My-sql, PHP, Java Script, and Html were used for the configuration database work. The configuration of items/categories, with the most appropriate sensitivity database information assigned to the selected sensitivity vocabulary, was programmed for display on the computer screen. The sensitivity vocabulary of a customer's choice for each factor was selected for the program to run, while the category and product configuration of the men's jacket most suitable for the search was displayed based on the user interface.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.6
• /
• pp.429-440
• /
• 2007

The purpose of this research is to develop the Human-centered CAD system in which human factors can be considered during the design stage. For this system there are several issues to research, like the digital human modeling technology, the definition of interactions between human and product, the simulation of human motion when using the product, and the bio-mechanical analysis of human, etc. This paper introduces how to construct the kinematical structure of the digital human model. For our digital human model H-ANIM, the international specification of humanoid animation is referenced. And we added the skeleton geometry and the skin surfaces to our model. And it can manipulate its joints by forward kinematics. Also the IKAN inverse kinematics algorithm is adopted to support the posture prediction of the digital human model in the product environment. All of these ideas are implemented using CAD API so that we can apply these functions to the current commercial CAD systems. In this manner, the human factor issues can be effectively taken into account at the early design phase and the costs of bio-mechanical evaluation will be significantly reduced.

• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.1
• /
• pp.56-67
• /
• 2005

The Processes of a new product design based on ergonomics and customer satisfaction have been studied for years. However, few attempts have been made to systematically include ergonomic design concept to communication service design. Service design can be regarded as a specific type of product design in a way that the processes of product design can also be employed to those of service design. However, a few difficulties may often arise in doing so. First, services have no explicit tangible features, which implies that a customer may not properly appraise contents, quality and functionality of newly designed services with a prototype before launching into market. Second, customer demands on services change more rapidly according to advances in related technology. In the study, we examined earlier studies of product design process and identified that a service design process must alos conform ergonomic methodology, extracting innovative values for creativitybased design and subsequently evaluate its level of customer satisfaction. In this study, we proposed a customer-centered ergonomic design process for communication services. This process includes a hierarchical structure of service requirement identification, customer-centered trend analysis, service scenario development and service evaluation. To prove the practicality of the design process, a case study of communication service design was conducted according to the procedure that follows.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.29-43
• /
• 2015

Objective: The aim of this study is to develop management guidelines and a procedure for an anthropometric suitability assessment of the main control room (MCR) in nuclear power plants (NPPs). Background: The condition of the MCR should be suitable for the work crews in NPPs. The suitability of the MCR depends closely on the anthropometric dimensions and ergonomic factors of the users. In particular, the MCR workspace design in NPPs is important due to the close relationship with operating crews and their work failures. Many documents and criteria have recommended that anthropometry dimensions and their studies are one of the foremost processes of the MCR design in NPPs. If these factors are not properly considered, users can feel burdened about their work and the human errors that might occur. Method: The procedure for the anthropometric suitability assessment consists of 5 phases: 1) selection of the anthropometric suitability evaluation dimensions, 2) establishment of a measurement method according to the evaluation dimensions, 3) establishment of criteria for suitability evaluation dimensions, 4) establishment of rating scale and improvement methods according to the evaluation dimensions, and 5) assessment of the final grade for evaluation dimensions. The management guidelines for an anthropometric suitability assessment were completed using 10 factors: 1) director, 2) subject, 3) evaluation period, 4) measurement method and criteria, 5) selection of equipment, 6) measurement and evaluation, 7) suitability evaluation, 8) data sharing, 9) data storage, and 10) management according to the suitability grade. Results: We propose a set of 17 anthropometric dimensions for the size, cognition/perception action/behavior, and their relationships with human errors regarding the MCR design variables through a case study. The 17 selected dimensions are height, sitting height, eye height from floor, eye height above seat, arm length, functional reach, extended functional reach, radius reach, visual field, peripheral perception, hyperopia/myopia/astigmatism, color blindness, auditory acuity, finger dexterity, hand function, body angle, and manual muscle test. We proposed criteria on these 17 anthropometric dimensions for a suitability evaluation and suggested an improvement method according to the evaluation dimensions. Conclusion: The results of this study can improve the human performance of the crew in an MCR. These management guidelines and a procedure for an anthropometric suitability assessment will be able to prevent human errors due to inadequate anthropometric dimensions. Application: The proposed set of anthropometric dimensions can be integrated into a managerial index for the anthropometric suitability of the operating crews for more careful countermeasures to human errors in NPPs.