• 전기학회논문지
• /
• 제66권2호
• /
• pp.305-314
• /
• 2017

Most of the existing researches on systemwide optimization of generator maintenance scheduling do not consider the equivalent operating hours(EOHs) mainly due to the difficulties of calculating the EOHs of the CCGTs in the large scale system. In order to estimate the EOHs not only the operating hours but also the number of start-up/shutdown during the planning period should be estimated, which requires the mathematical model to incorporate the economic dispatch model and unit commitment model. The model is inherently modelled as a large scale mixed-integer nonlinear programming problem and the computation time increases exponentially and intractable as the system size grows. To make the problem tractable, this paper proposes an EOH calculation based on demand grouping by K-means clustering algorithm. Network congestion is also considered in order to improve the accuracy of EOH calculation. This proposed method is applied to the actual Korean electricity market and compared to other existing methods.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.320-324
• /
• 2013

A crack identification method using an equivalent bending stiffness for cracked beam and committee of neural networks is presented. The equivalent bending stiffness is constructed based on an energy method for a straight thin-walled pipe, which has a through-the-thickness crack, subjected to bending. Several numerical analysis for a steel cantilever pipe using the equivalent bending stiffness are carried out to extract the natural frequencies and mode shapes of the cracked beam. The extracted modal properties are used in constructing a training patterns of a neural network. The input to the neural network consists of the modal properties and the output is composed of the crack location and size. Multiple neural networks are constructed and each individual network is trained independently with different initial synaptic weights. Then, the estimated crack locations and sizes from different neural networks are averaged. Experimental crack detection is carried out for 3 damage cases using the proposed method, and the identified crack locations and sizes agree reasonably well with the exact values.

• 자원환경지질
• /
• 제50권1호
• /
• pp.61-71
• /
• 2017

본 연구는 절리의 빈도 및 길이분포가 절리암반의 수리지질학적 특성에 미치는 영향을 평가하기 위하여 이차원 불연속절리망 (DFN; discrete fracture network) 유체유동 해석을 바탕으로 한 수치실험을 수행하였다. 두개의 절리군을 사용하여 절리의 빈도와 길이분포를 달리하며 추계론적으로 생성한 총 51개의 DFN 시스템에 대하여 $0^{\circ}$부터 매 $30^{\circ}$ 간격으로 총 12 방향으로 구현한 총 612개의 $20m{\times}20m$ DFN 블록에서 방향에 따른 블록수리전도도가 산정되었다. 또한, 각각의 DFN 시스템에서 이론적 블록수리전도도와 더불어 주 수리전도도텐서, 평균 블록수리전도도 등이 산정되었다. 절리군의 빈도의 증가 또는 길이의 평균 및 표준편차 증가에 따라 임의 방향으로의 블록수리전도도는 증가하며 DFN 시스템에 대한 등가연속체 취급 가능성이 높아지지만, 절리군 간의 빈도 차이가 커지면 블록수리전도도의 이방성 증대로 인하여 등가연속체 취급 가능성이 낮아질 수 있는 것으로 평가되었다. 두 절리군의 교차각이 작을수록 등가연속체 특성은 빈도 및 길이분포의 변화에 상대적으로 더욱 영향을 받는 것으로 평가되었다. 등가연속체로 취급하기 어려울 정도로 두 절리군의 교차각이 작아도 절리군의 빈도 또는 길이 분포가 증가하면 등가연속체 취급 가능성은 높아진다.

• 전기학회논문지
• /
• 제56권9호
• /
• pp.1549-1555
• /
• 2007

The complexity of modern power systems often makes it impractical to model it in its entirety for electromagnetic transient studies. Therefore areas outside the immediate area of interest must be represented by some form of Frequency Dependent Network Equivalent (FDNE). The advantage of using z-domain fitting is that it can be directly implemented in a digital simulation program without any loss of accuracy. Fitting in the s-domain always requires "discretizing" a continuous system and the inherent approximations. This paper presents z-domain rational function formulation and demonstrates the use of it for the assessment of the transient response of the Lower South Island of New Zealand. Moreover by using a well publicized test system and providing complete information on the developed FDNE coefficients other researchers easily benchmark their work against this.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.417-421
• /
• 1991

In electromagnetic transient analysis, complex transmission system should be modelled in detail. But in large system, this full representation of power transmission system has a big burden in many sides such as computation time, modelling efforts, etc. It is very required, therefore, in electromagnetic transients studies to represent parts of a complete system in a reduced or an equivalent form. This paper develops the method from which system equivalents may be derived. The suggested method is of an essentially transient form, and allows travelling wave interaction between the equivalent and explicit transmission network to be modelled.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1105-1110
• /
• 2007

This paper describes an equivalent circuit modeling of 4-port connector system. A coupled transmission line was designed and fabricated, mimicking a 4-port connector system, and then S-parameters were measured using 4 port VNA (Vector Network Analyzer). The S-parameters from measurement and from Full-wave simulator coincided quite nice. By using these S parameters, an equivalent circuit parameters for a 4-port system was obtained. The time domain response from the equivalent circuit model matched to the signals, which was measured using TDR(Time Domain Reflectometry) meter. We were also convinced that there should be enough bandwidth to get a meaningful time domain result from Fourier inverse transformation of the S parameters. In addition, we applied the conversion algorithm to the 4-port connector system, which calculates the S-parameters of a 4 port system using the data from a 2-port VNA with the other ports open. Comparison of the two data, one from measurement and the other one from the conversion algorithm, was made in this manuscript.

• KIEE International Transactions on Power Engineering
• /
• 제12A권1호
• /
• pp.1-5
• /
• 2002

This paper presents the procedure to construct equivalent model of large power system based on nonlinear time simulation responses. It consists of coherency identification, generator aggregation and network reduction. Coherency index that can be directly implemented to this procedure is proposed. Generator aggregation based on detailed model is performed. This procedure can be used to construct equivalent model in PSS/E. It is also possible to reduce the large power system directly from the nonlinear time responses. This procedure is applied to the transient stability analysis of Korea power system that now experiences rapid changes. The equivalent model is compared with the original model in its size, accuracy, speed and performance. This paper shows that the developed equivalent model is a good estimate of the original system.

• Nuclear Engineering and Technology
• /
• 제44권6호
• /
• pp.639-652
• /
• 2012

A three-dimensional discrete fracture network model was developed in order to simulate the hydraulic characteristics of a granitic rock mass at Korea Atomic Energy Research Institute (KAERI) Underground Research Tunnel (KURT). The model used a three-dimensional discrete fracture network (DFN), assuming a correlation between the length and aperture of the fractures, and a trapezoid flow path in the fractures. These assumptions that previous studies have not considered could make the developed model more practical and reasonable. The geologic and hydraulic data of the fractures were obtained in the rock mass at the KURT. Then, these data were applied to the developed fracture discrete network model. The model was applied in estimating the representative elementary volume (REV), the equivalent hydraulic conductivity tensors, and the amount of groundwater inflow into the tunnel. The developed discrete fracture network model can determine the REV size for the rock mass with respect to the hydraulic behavior and estimate the groundwater flow into the tunnel at the KURT. Therefore, the assumptions that the fracture length is correlated to the fracture aperture and the flow in a fracture occurs in a trapezoid shape appear to be effective in the DFN analysis used to estimate the hydraulic behavior of the fractured rock mass.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.135-139
• /
• 2000

This research proposes a nonlinear sliding mode control. The sliding mode control is designed according to Lyapunov function. The equivalent control term is estimated by neural network. To estimate the unknown part in the control law in on-line fashion, A recurrent neural network is given as on-line estimator. The stability of the control system is guaranteed owing to the on-line learning ability of the recurrent neural network. It is certificated through simulation results to be applied to nonlinear system that the function approximation and the proposed control scheme is very effective.

• 한국통신학회논문지
• /
• 제37권5B호
• /
• pp.370-376
• /
• 2012

CSS(Chirp Spread Spectrum)는 WPAN(Wireless Personal Area Network) 환경에서 SDS-TWR(Symmetric Double Sided - Two Way Ranging) 기반의 위치인식 시스템을 구현하는 기술로 사용된다. 그러나 CSS의 SDS-TWR은 전파 및 장애물과 같은 환경에 따른 간섭으로 인해 레인징 오차가 발생한다. 따라서 위치인식 시스템 개발을 위해서는 이를 보정하기 위한 보정 알고리즘이 요구된다. 본 논문은 위치인식 정확도 성능 향상을 위하여 AEDR(Algorithm of Equivalent Distance Rate) 알고리즘과 칼만필터가 적용된 KF_EDR(Kalman Filter and Equivalent Distance Rate) 보정 알고리즘을 제안하고, 그 성능을 분석 및 평가하였다. 실험 결과, KF_EDR은 AEDR 알고리즘에 비해 위치인식 정확도를 복도 그리고 운동장에서 각각 10.5%, 4.2% 더 개선시켰다. 이 결과는 위치인식 데이터의 신뢰성을 향상시킴 으로써 실제 위치인식 시스템 구현에 상당한 도움을 줄 수 있을 것으로 판단된다.