• Journal of Korean Society of Steel Construction
• /
• v.21 no.4
• /
• pp.393-401
• /
• 2009

The flexural-stiffness formula of the wale for the innovative prestressed support (IPS) system was precisely derived, and the equivalent beam stiffness was introduced for application in the actual design of the IPS wale. The cable tension forces of the IPS wale were calculated in both cases, and the axial-deformation effects were included and ignored, respectively. The central displacements of the 1-post, 2-post, 3-post, and 4-post IPS wales were calculated based on the principle of virtual work. The effects of the IPS wale length and cable inclination angle were also investigated using the derived central displacements. The simplified equivalent flexural stiffness of the IPS wale is presented herein for design purposes, and the validity of the proposed design formula was verified through its comparison with the FE and analysis solutions.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.2
• /
• pp.66-78
• /
• 2021

In this study, the effect of Symmetry Breaking was compared according to the equivalent ratio condition and the number of nozzles where combustion instability occurs in an annular combustor. Generally, due to the relatively short combustor length, a longitudinal instability was less likely to occur in the annular combustor, but the combustion instability sometimes happens when ducts such as transition piece in gas turbine power station are present. In this case, due to the duct, only the longitudinal instability mode is observed. The characteristics of Symmetry Breaking were investigated according to the number of five lean nozzles and the equivalent ratio combination, and as the equivalent ratio decreased, the effect of Symmetry Breaking rapidly occurred, and the instability was dramatically disappeared and the amplitude was greatly reduced. In addition, it was confirmed that as the number of lean nozzles increased, a phenomenon such as a reduction in the equivalent ratio appeared.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.247-254
• /
• 2000

In this study, the reinforcing effect of micropile for weathered rock is analysed by laboratory model tests. Especially, the effect of the number, the surface roughness, and length of micropile are focused. The results of tests are as follows: $\circled1$ The deformation modulus of reinforced ground is less than equivalent deformation modulus, and $\circled2$ Increasing effect of unconfined compressive strength is not large as times as increasing the number of micropile.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.506-508
• /
• 2006

A frequency selective surface (FSS), whose unit cell consists of a ternary tree loop loaded with a modified tripole, is proposed to block multiple frequency bands. Target frequency bands correspond to Korean personal communication services, cellular mobile communication, and 2.4 GHz industrial, scientific, and medical bands. Through the adjustment of inter-element and inter-unit cell gaps, and adjustment of the length of elements, we present an FSS design method that makes the precise tuning of multiple resonance frequencies possible. Additionally, to verify the validity of our approach, simulation results obtained from a commercial software tool and experimental data are also presented.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.892-898
• /
• 2013

A field emission projection microscope was constructed to investigate the atomic and chemical-bonding structure of molecules using electron in-line holography. Fringes of carbon nanotube images were found to be interferograms equivalent to those created by the electron biprism in conventional electron microscopy. By exploiting carbon nanotubes as the filament of the electron biprism, we measured the transverse coherence length of the electron beam from tungsten field emitters. The measurements revealed that a partially coherent electron-beam was emitted from a finite area.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.172-174
• /
• 2003

In this paper, we analyze the traveling-wave electro-absorption modulator (TW-EAM) in consideration of the microwave feed-line. The TW-EAM is analyzed by using the equivalent circuit model. The microwave feed-line isanalyzed by momentum method. In a view point of microwave characteristics, we present the effect of the structure and the length of microwave feed-line.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.87-90
• /
• 2000

In this paper. we present a method for a systematic design of a dielectric slab polarizer in the circular waveguide. This structure is realized using a tapered dielectric slab inside a circular waveguide. Commercial software is used to obtain the equivalent dielectric constant of the circular waveguide partially filled with a dielectric slab. The length of the tapered region is determined so that the reflection from the dielectric slab is sufficiently low. A polarizer operating at 10 GHz band is designed, fabricated and tested.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.2
• /
• pp.160-164
• /
• 2010

The radio frequency (RF) model of SOI FinFETs with gate length of 40 nm is verified by using a 3-dimensional (3-D) device simulator. This paper shows the equivalent circuit model which can be used in the circuit analysis simulator. The RMS modeling error of Y-parameter was calculated to be only 0.3 %.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.339-343
• /
• 2016

본 연구에서는 양자역학적 전하수송 모델링을 바탕으로 channel length ($L_{ch}$), equivalent oxide thickness (EOT), supply voltage ($V_{DS}$) 등의 소자 파라미터들에 초점을 맞춰 저전력 소자를 구현하였다. 본 연구에서 나타낸 최적의 소자 특성으로부터 ITRS에서 제시하고 있는 2021년 예측되는 소자 특성에 비하여 더 낮은 $V_{DS}$에서 동작을 하면서 더 높은 $I_{on}$과 낮은 SS 로서 구동하는 것이 가능할 것으로 기대된다. 뿐만 아니라 inverter 동작에 있어서 ideal inverter에 가까운 동작을 할 것으로 기대된다.

• ETRI Journal
• /
• v.15 no.3
• /
• pp.35-45
• /
• 1994

In this paper we develop an approximation formalism on the queue length distribution for general queueing models. Our formalism is based on two steps of approximation; the first step is to find a lower bound on the exact formula, and subsequently the Chernoff upper bound technique is applied to this lower bound. We demonstrate that for the M/M/1 model our formula is equivalent to the exact solution. For the D/M/1 queue, we find an extremely tight lower bound below the exact formula. On the other hand, our approach shows a tight upper bound on the exact distribution for both the ND/D/1 and M/D/1 queues. We also consider the $M+{\Sigma}N_jD/D/1$ queue and compare our formula with other formalisms for the $M+{\Sigma}N_jD/D/1$ and M+D/D/1 queues.