• Economic and Environmental Geology
• /
• v.22 no.4
• /
• pp.303-314
• /
• 1989

The electrum-silver-sulfide mineralization of the Geojae island area was deposited in three stages (I, II, and carbonate) of quartz and calcite veins that crosscut Late Cretaceous volcanic rocks and granodiorite(83 m.y.). Stages I and II were terminated by the onset of fractunng and breCCIation events. Fluid inclusion data suggest that the gold-sulfide-bearing stages I and II each evolved from an initial high temperature( near $370^{\circ}C$) to a later low temperature(near $200^{\circ}C$). Each of those stages represented a separate mineralizing system which cooled prior to the onset of the next stage. The relationship between homogenization temperature and salinity in stages I and II suggests a complex history of boiling, cooling and dilution. Evidence of boiling indicates a pressure of < 100 bars, corresponding to a depth of 500 to 1,250m assummg hthostatlc and hydrostatic pressure regimes, respectively. Fluid inclusion and mineralogical evidence suggest that the electrum-silver mineralization was deposited at a temperature of $220-260^{\circ}C$ from ore fluids with salinities between 1.9 and 8.1 equivalent wt.% NaCl. Total sulfur concentration is estimated to be $10^{-3}$ to $10^{-4}$ molal. The estimated $fs_2$ and $fo_2$ range from $10^{-11.8}$ to $10^{-14}$ atm and $10^{-35}$ to $10^{-36}$ atm, respectively. The chemical conditions indicate that the dominant sulfur species in the ore forming fluids was a reduced form($H_2S$). Rapid cooling and dilution of ore-forming fluids by mixing with less-evolved meteoric waters led to gold-silver deposition through the breakdown of the bisulfide complex($Au(HS)_2$) as the activity of $H_2S$ decreased.

• Horticultural Science & Technology
• /
• v.29 no.4
• /
• pp.358-365
• /
• 2011

Lespedeza cuneata G. Don is a plant commonly grown in Asian countries, which has been widely used as an oriental medicinal herb to treat diabetes, diarrhea and various other inflammatory diseases. The phenolics of dry leaves of L. cuneata G. Don were extracted by using 80% (v/v) aqueous methanol in assistance with homogenization and sonification. The phenolic extract and its five different fractions (n-hexane, chloroform, ethyl acetate, n-butanol, and water) were used to evaluate the levels of total phenolics, total flavonoids, and antioxidant capacity as well as the inhibitory effect of tyrosinase activity. Ethyl acetate fraction (1 g) had the highest levels of total phenolics at 240.8 mg gallic acid equivalents (GAE), total flavonoids as 90.4 mg catechin equivalents (CE) as well as antioxidant capacity at 523.4 mg vitamin C equivalents (VCE) on ABTS assay and 329.5 mg VCE on DPPH assay among fractions. One g of water fraction contained total phenolics at 133.1 mg GAE, total flavonoids at 34.5 mg CE, and antioxidant capacity at 333.4 mg VCE for ABTS assay and 313.2 mg VCE for DPPH assay. Inhibition of tyrosinase activity of water fraction at 300 ${\mu}g{\cdot}mL^{-1}$ was at 47.2% and 21.1% for L-tyrosine and L-DOPA as its substrate, respectively. On the other hand, ethyl acetate fraction at 300 ${\mu}g{\cdot}mL^{-1}$ showed tyrosinase inhibition of 10.2% for L-tyrosine and 11.9% for L-DOPA. These results suggested that the phenolics from dry leaves of L. cuneata G. Don may be utilized as a potent source of antioxidants and skin whitening agents.

• Journal of Animal Science and Technology
• /
• v.46 no.3
• /
• pp.405-414
• /
• 2004

This study evaluated the effects of preslaughter feed withdrawal and chiller ageing on objective meat quality traits in longissimus dorsi (LD), biceps femoris(BF), and triceps brachii(TB) muscles of Korean native black pigs. Twenty males were assigned into a 2(pre-slaughter feeding) ${\times}$ 2(pre-slaughter stress) ${\times}$ 4(chiller ageing) factorial. Pre-slaughter fasting for 18 h resulted in significantly(P < 0.05) higher pHs at 1.5 h for both LD and BF. On the other hand, muscle temperature did not differ between the fasted and fed animals. The result implied that pigs with different pre-slaughter feedings experienced different pH-temperature profiles during rigor development. This was reflected by the significan(P < 0.05) increase in cooking loss and hunter $L^*$ for LD of the fed pigs. However, WB-shear force of LD was not affected by the treatment. Furthermore, objective meat quality of BF and TB did not differ between the treatments. Hunter $L^*$ value and cooking loss for LD were constant for 7 d, followed by a significant(P < 0.05) increase at 14 d. BF and TB had significantly(P < 0.05) higher hunter $L^*$ value and cooking loss at 14 d than at 1 d. Significant(P < 0.05) linear reductions in LD WB-shear force took place from 1 to 7 d, while BF and TB WB-shear forces were significantly (P < 0.05) reduced at 14 d. Simple correlation for WB-shear force between LD and BF, and between LD and TB indicated that 6 kg of shear force for LD was equivalent to approximately 3.5 and 6 kg for TB and BF, respectively. On the basis of the current result, feeding until the morning of slaughter appeared to contribute to favourable meat color for LD. However, negative effect on palatability due to increase in cooking loss should be taken into account. A 7-d chiller ageing was likely the best practice for LD, while TB appeared not to require chiller ageing. A 14-d ageing could improve the tenderness of BF, but could likely reduce juiciness.

• Journal of Animal Science and Technology
• /
• v.46 no.3
• /
• pp.427-436
• /
• 2004

The current study was conducted to determine the effect of suspension method on satisfaction level of Korean consumers and objective meat quality traits in Hanwoo longissimus dorsi(LD), triceps brachii(TB) and semimembranosus(SM) muscles. Eighteen Hanwoo steers were slaughtered and alternative sides were hung either by pelvic bone(TS) or Achilles tendon(Al). Sensory characteristics, WB-shear force, sarcomere length, water-holding capacity, saroomere length and cooking loss were determined after a 7-d chiller ageing. Higher carcass quality grade received significantly(p < 0.05) greater eating quality for LD, but the grade did not affect eating quality for both TB and SM. TS did not influence objective and subjective meat quality for TB, but that significantly(P < 0.05) improved eating quality for LD and SM. The most noticeable result was that when SM was tenderstretehed, eating quality was equivalent to that of nonna1ly hung LD. In relationship between objective and subjective meat quality assessments, eating qualty for LD had a significant(P < 0.05) relationship with intramuscular fat content, while that for SM was greatly(P < 0.05) related to saroomere length. The current study indicated that pelvic hanging was an effective way to improve eating quality both LD and SM, and carcass quality grades did not greatly reflect eating quality of SM and TB. The data also implied that instnunental measurements poorly estimated the satisfaction level of Korean conswners.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.785-792
• /
• 2006

The characteristics of alcohol fermentation using sweet persimmon juice were studied in static fermentation in an effort to develop new types of functional wine. The yeast strain Saccharomyces cerevisiae KCCM 12650 was selected for use in the fermentation of sweet persimmon juice. Attempts were made to modify the sweet persimmon juice in order to find suitable conditions for alcohol fermentation. The modified sweet persimmon juice (pH 4.0) that was most suitable for alcohol fermentation contained $24^{\circ}Brix$ of sugar supplemented with sucrose as a carbon source and 0.5 g/L of $(NH_4)_2HPO_4$ as a nitrogen source. After 5 days of fermentation at $25^{\circ}C$, 12.8% of alcohol was produced from the modified juice and its pH was slightly decreased to 3.9. Browning of the wine was observed during storage due to the oxidation of phenolic compounds. The initial browning of 0.08% at $OD_{420}$ after fermentation increased to 0.40 during storage for 11 weeks at room temperature. The addition of $K_2S_2O_5$ was effective in delaying the browning of the wine. The browning of the wine decreased to 0.25 at $OD_{420}$ with the addition of 200 mg/L of $K_2S_2O_5$. The wine produced in this study contained some organic acids such as malic acid (6.82% g/L) and succinic acid (1.40 g/L), some minerals such as $K^+$ (947.8 mg/L) and $Mg^{2+}$ (36.4 mg/L), as well as soluble phenolics (779 mg/L of gallic acid equivalent). Schisandra fruit was added to the sweet persimmon juice during alcohol fermentation in order to improve the sour taste and flavor. The best sensory quality (taste, flavor, and color) was obtained by adding 0.5% schisandra fruit.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.4 no.3
• /
• pp.206-211
• /
• 1984

The influence of fertilizer on the growth characteristics in Korean lawn grass was studied from June through October in a experiment. The results were as follows: 1. Maximum dry matter weight of Korean lawn grass was achieved in early in early August when it was $64.3g/m^2$ without fertilizer and $157.9g/m^2$ with fertilizer. On the other hand, the dry matter weight of whole plant including Korean lawn grass reached the maximum in late September, which was late, to some extent, compared with that if pure Korean lawn grass, presumably associated with seed maturing period of $C_4$ type plants. 2. Notable positive effect on leaf blade and non-leaf part weight in Korean lawn grass was also detected. However, the rate of dry matter occupied by non-leaf part was markedly increased by fertilizer application. 3. The dry matter portion occupied by Korean lawn grass the in total dry matter weight of whole plant was significantly decreased as time went by, particularly in case of fertilizer application. 4. Fertilizer, which might imply an increased potential of tiller numbers according to fertilizer. 5. In general, the seasonal change pattern of the rhizome of Korean lawn grass coincided with that of the aboveground organs: Its maximum dry matter weight achieved from late August to early September was $194.2g/m^2$ with nil fertilizer, and, with fertilizer, $259.7g/m^2$, of which figures were equivalent to be increased to 33.7%, compared to that with nil fertilizer. Applying fertilizer increased the weight of root: The highest values were $36.7g/m^2$ with nil fertilizer and $80.9g/m^2$ with fertilizer.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.3
• /
• pp.233-248
• /
• 2012

The national emission from energy sector accounted for 84.7% of all domestic emissions in 2007. Of the energy-use emissions, the emission from mobile source as one of key categories accounted for 19.4% and further the road transport emission occupied the most dominant portion in the category. The road transport emissions can be estimated on the basis of either the fuel consumed (Tier 1) or the distance travelled by the vehicle types and road types (higher Tiers). The latter approach must be suitable for simultaneously estimating $CO_2$, $CH_4$, and $N_2O$ emissions in local administrative districts. The objective of this study was to estimate 31 municipal GHG emissions from road transportation in Gyeonggi Province, Korea. In 2008, the municipalities were consisted of 2,014 towns expressed as Dong and Ri, the smallest administrative district unit. Since mobile sources are moving across other city and province borders, the emission estimated by fuel sold is in fact impossible to ensure consistency between neighbouring cities and provinces. On the other hand, the emission estimated by distance travelled is also impossible to acquire key activity data such as traffic volume, vehicle type and model, and road type in small towns. To solve the problem, we applied a hierarchical cluster analysis to separate town-by-town road patterns (clusters) based on a priori activity information including traffic volume, population, area, and branch road length obtained from small 151 towns. After identifying 10 road patterns, a rule building expert system was developed by visual basic application (VBA) to assort various unknown road patterns into one of 10 known patterns. The expert system was self-verified with original reference information and then objects in each homogeneous pattern were used to regress traffic volume based on the variables of population, area, and branch road length. The program was then applied to assign all the unknown towns into a known pattern and to automatically estimate traffic volumes by regression equations for each town. Further VKT (vehicle kilometer travelled) for each vehicle type in each town was calculated to be mapped by GIS (geological information system) and road transport emission on the corresponding road section was estimated by multiplying emission factors for each vehicle type. Finally all emissions from local branch roads in Gyeonggi Province could be estimated by summing up emissions from 1,902 towns where road information was registered. As a result of the study, the GHG average emission rate by the branch road transport was 6,101 kilotons of $CO_2$ equivalent per year (kt-$CO_2$ Eq/yr) and the total emissions from both main and branch roads was 24,152 kt-$CO_2$ Eq/yr in Gyeonggi Province. The ratio of branch roads emission to the total was 0.28 in 2008.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.12-16
• /
• 2012

Purpose : In conventional PET image reconstruction, iterative reconstruction methods such as OSEM (Ordered Subsets Expectation Maximization) have now generally replaced traditional analytic methods such as filtered back-projection. This includes improvements in components of the system model geometry, fully 3D scatter and low noise randoms estimates. SharpIR algorithm is to improve PET image contrast to noise by incorporating information about the PET detector response into the 3D iterative reconstruction algorithm. The aim of this study is evaluation of SharpIR reconstruction method in PET/CT. Materials and Methods: For the measurement of detector response for the spatial resolution, a capillary tube was filled with FDG and scanned at varying distances from the iso-center (5, 10, 15, 20 cm). To measure image quality for contrast recovery, the NEMA IEC body phantom (Data Spectrum Corporation, Hillsborough, NC) with diameters of 1, 13, 17 and 22 for simulating hot and 28 and 37 mm for simulating cold lesions. A solution of 5.4 kBq/mL of $^{18}F$-FDG in water was used as a radioactive background obtaining a lesion of background ratio of 4.0. Images were reconstructed with VUE point HD and VUE point HD using SharpIR reconstruction algorithm. For the clinical evaluation, a whole body FDG scan acquired and to demonstrate contrast recovery, ROIs were drawn on a metabolic hot spot and also on a uniform region of the liver. Images were reconstructed with function of varying iteration number (1~10). Results: The result of increases axial distance from iso-center, full width at half maximum (FWHM) is also increasing in VUE point HD reconstruction image. Even showed an increasing distances constant FWHM. VUE point HD with SharpIR than VUE point HD showed improves contrast recovery in phantom and clinical study. Conclusion: By incorporating more information about the detector system response, the SharpIR algorithm improves the accuracy of underlying model used in VUE point HD. SharpIR algorithm improve spatial resolution for a line source in air, and improves contrast recovery at equivalent noise levels in phantoms and clinical studies. Therefore, SharpIR algorithm can be applied as through a longitudinal study will be useful in clinical.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.2
• /
• pp.62-67
• /
• 2014

A glomerular filtration rate (GFR) study is a test that uses radioactive materials or tracers (radiopharmaceuticals) and a computer to see how well the kidneys are working. Asan Medical Center analyzed and compared data between kidney depth, acquired from kidney donors' CT image and acquired from Gates method's GFR value that are calculated by Tonnesen equation. This study was able to confirm that kidney depth measured from CT image was higher than the Gates Method's GFR value, which was calculated by Tonnessen equation; the direct relationship among pathologic results is confirmed. Particularly, kidney donor whose kidney was at the pelvic area had direct relationship with other clinical results. During the GFR test, it is necessary to confirm the location of kidney has no change with reference of CT image. If kidney depth is manually corrected using CT image when we measures GFR of deformed or horse-shoe kidney, it would be possible to acquire the compatible value which is equivalent to clinical result. There would be a possible issue of appropriateness that whether the applied GFR using CT image's kidney depth has clinical validity. In case of a pediatric patient, the GFR derived from Tonnesen was quiet underestimated while manual method and Gordon stay in normal range. Which results may be correct among them? There have been many reports about kidney depth, to be an accurate index of GFR in children. As one of the study performers, we should contemplate what the best option for pediatric patients would be.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.2
• /
• pp.17-21
• /
• 2014

Purpose With the recent rise of social issue regarding radiation exposure, attention to medical radiation use has been placed under a great spotlight. During PET-CT examination, generally about 40% more of $^{18}F$-FDG is used than EANM recommendation. While maintaining the diagnostic test result, we hope to find optimal injection dose to minimize the $^{18}F$-FDG in patients by utilizing the latest PET-CT scanner which is equiped with the newest technology. Materials and Methods During this experiment, the Biograph Truepoint 40 (siemens, USA) installed in 2007 and mCT 64 (siemens, USA) installed in 2011 were used and evaluated NECR (noise-equivalent counting rate) by using a scatter phantom. For the image quality evaluation of each scanner, we injected 3.7, 4.44 and 5.18 MBq/kg of $^{18}F$-FDG in NEMA IEC Body Phantom and also evaluated SNR between two scanners by using the data acquired at 60, 70, 80, 90, 100, 110 and 120 sec per bed. For the clinical evaluation, actual data of patients who were injected $^{18}F$-FDG 3.7, 4.44, 5.18 MBq/kg were used to compare SNR and draw a final result. Results As a result, mCT 64 peak NECR value was 1.65e+005, which is 10% higher than Turepoint 40. SNR values using the IEC body phantom was 17.9%, 17.4% and 17.1% higher in $^{18}F$-FDG 3.7 MBq/kg, 4.44 MBq/kg and 5.18 MBq/kg. In clinical patients, SNR values of the image mCT 64 was 16.5, which is 25% higher than Turepoint 40 scanner. Conclusion To draw a conclusion from the test result of this experiment, the same quality of SNR could be attained even with 10% reduced injection dose, if when the duration is extended by 10 sec/bed. This optimal result was possible due to enhanced equipment. The NECR (one of the equipment's performance assessment criteria for the scanner) increased by 10% and the SNR (one of the image quality assessment criteria) also increased by 17.5%. Therefore, we can expect to reduce the injection dose without deterioration of image quality. In consequence, it will also help to decrease the patient's anxiety of the radiation exposure.