• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.525-526
• /
• 2007

Continuous on-line temperature monitoring provides the means to evaluate current condition of equipment and detect abnormality. It allows corrective measures to be taken to prevent upcoming failure. Continuous temperature monitoring and event recording provides information on the energized equipment's response to normal and emergency conditions. On-line temperature monitoring helps to coordinate equipment specifications and ratings, determine the real limits of the monitored equipment and optimize facility operations. Using wireless technique eliminates any need for special cables and wires with lower installation costs if compared to other types of online condition monitoring equipment. In addition, wireless temperature monitoring works well under difficult conditions in strategically important locations. Wireless technology for on-line condition monitoring of energized equipment is applicable both as standalone system and with an interface with power quality monitoring system.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.610-613
• /
• 2008

According to multi-functionalizing the faculty of EMU and installing up-to-date convenient facilities in EMU additionally and individually, it make many problems, such as space insufficiency of driver cab, interface inharmony and functional overlapping of device. So it is necessary to unify broadcasting equipment, display equipment and CCTV installed individually.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.481-484
• /
• 2006

A electric power conversion system in a pumped storage power plant is important equipment for converting electric motor kinetic energy into electric power. A electric power conversion monitoring system consists of high voltage thyristor firing equipment, fault detection module, data gathering module, real time data processing equipment and man machine interface system. This paper describes electric power conversion system overview, the developed SFC monitoring system configuration including system characteristics, and successful application result to San-Cheong pumped storage power plant.

• Journal of Digital Contents Society
• /
• v.4 no.2
• /
• pp.191-202
• /
• 2003

This paper presents a design and implementation example of intelligent equipment management system that is constructed to manage high price equipment of digital content department effectively. To support system operation we executed data mining and presented various rules that appear in dat3 mining process based on dat3 of user, equipment and using record. We presented personalization plan of web site to offer user dependent administration policy and dynamic interface using analyzed informatio.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.661-665
• /
• 2010

Current subway station's office employee must perform safety management tasks by monitoring the various safety management systems. But these monitoring systems are limited in effective situational awareness and response to a state of emergency immediately. It is necessary to develop an integrated safety management system display. In this study, we developed subway station safety management system's (CCTV, fire detection & alarm system, screen door control equipment) integrated prototype display with ecological interface design framework and evaluated prototype display interface's usability with GOMS model. The result was that the ecological interface's performance was better than existing safety management system's interface.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.347-350
• /
• 1998

본 논문에서는 최근 광대역 무선 가입자망으로 각광받고 있는 LMDS(Local Multipoint distribution Service)시스템에서 Head-End 의 AIU(Air Interface Unit)와 HUB 사이의 거리에 따른 전송지연 시간과 HUB 와 가입자 장치(CPE:Customer Premises Equipment)내의 NIU(Network Interface Unit)간의 전송 지연 시간에 의하여 서비스 반경이 제한되어 지는 것에 관하여 살펴보고 적절한 서비스 반경에 대하여 제안하였다.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.47-51
• /
• 2008

Computer and communication of based IT technology use to das that remote control, monitoring, measuring automation gas switch, recloser totaled far about $20{\sim}30km$. For increasing efficiency billing, metering of high voltage customer use to amr system. If between das and amr interface operate when generated fault in high voltage electric equipment of customer part, amr system serve to das quickly in fault information data, correct fault location.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.131.1-131
• /
• 2001

At the present time, multimedia chip, internet application, and network equipment is designed by using ARM core. Because it has a good debugging, software compiler and needed low power. We must process a data coding to send a multimedia data by real time. So need to connect software and hardware algorithm. In this research, We design interface for ARM9/AMBA based board using VHDL for these function implementation. The board is used the ARM company´s ARM940T for software function implementation and Xilinx company´s Virtex E2000 for hardware function algorithm. The various hardware algorithm (ME,ME,DCT) block for performance can be implemented on this system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.299-302
• /
• 2003

The interface heat transfer coefficient was measured for non-isothermal bulk forming of Ti-6Al-4V. FE analysis and experiments were conducted. Equipment consisting of AISI H13 die was instrumented with thermocouples located at sub-surface of the bottom die. Die temperature changes were investigated in related to the process variables such as reduction, lubricant and initial die temperature. The calibration approach based on heat conduction and FE analysis using an inverse algorithm were used to evaluate the interface heat transfer between graphite-lubricated die and glass-coated workpiece. The coefficients determined determined were affected mainly by the contact pressure. The validation of the coefficients was made by the comparison between experimental data and FE analysis results.

• Journal of Biomedical Engineering Research
• /
• v.31 no.3
• /
• pp.251-257
• /
• 2010

This paper reports a noble instrument that helps physically disabled people to access computers. There have been numerous attempts to develop such a methodology, but most of them require an additional space for workstation often including access program installation. The additional space also needs to be carefully designed to consider each specific disabled area. This study aims to develop a system that removes the spacial limitation by putting the integrated computer interface using the wheelchair controller. The implementation of the computer workstation is performed by utilizing an USB interface. The developed equipment will take an important role to support various social lives for the users and eventually to improve their quality of life.