• Archives of design research
• /
• v.11
• /
• pp.48-58
• /
• 1995

In 1981. KOREA applied YEAR OF WORLD DISABLED DESIGNNATED BY UN as starting point to begin noticing disabled and gradually improve and understand the problems of the disabled.This study considering the income level and welfare level selected basic most widely used wheelchair as subject of study. Design Application of this study's main analysis are as follolVs 1. MAN-MACHINE INTERFACE STUDY ANALYSIS!Basic concept of wheelchair is for persons uncapable of move by sitting down. so main focus of study was considered on equipment which on chair. 2. WHEELCHAm MOVEMENT STUDY ANALYSISlThrough movement and test measurement which can be considered as basic study of Ergonomics, observe movement changes accordingly. 3. BACK(MAIN) WHEEL AND HANDRIM MOVEMENT ANALYSIS / Seat and wheel as the most important component of a wheelchair, study the relation of handrim and hand movement and test the most effective and comfortable handrim. Direction of the study was concerntrated on three areas, with results and information collected, would like to suggest design change of X type collapsible chair in areas of size of SEAT(air pocket type), HANDRIM(anti-slip hump), ARMHEST(transfer movement, rubber padding. accent), and HANDLE(adjustable, round type). The content started this study is only one small position of understanding the disabled. Also, the importance of one of many business of assisting disabled rehabilitation. (IJISABLED, REHABILITATION. APPROACH)

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2109-2116
• /
• 2014

This paper presents the implementation and design of the advanced WI-FI systems with beam-forming antenna that radiate their power to the direction of user equipment to improve the overall throughput, contrast to the general WI-FI systems equipped with omni-antenna. The system consists of patch array antenna, DSP, FPGA, and Qualcomm's commercial chip. The beam-forming system on the FPGA utilizes the packet information from Qualcomm's commercial chip to control the phase shifters and attenuators of the patch array antenna. The PCI express interface has been used to maximize the communication speed between DSP and FPGA. The directions of arrival of users are managed using the database, and each user is distinguished by the MAC address given from the packet information. When the system wants to transmit a packet to one user, it forms beams to the direction of arrival of the corresponding user stored in the database to maximize the throughput. Directions of arrival of users are estimated using the received preamble in the packet to make its SINR as high as possible. The proposed beam-forming system was implemented using an FPGA and Qualcommm's commercial chip together. The implemented system showed considerable throughput improvement over the existing general AP system with omni-directional antenna in the multi-user communication environment.

• Journal of Adhesion and Interface
• /
• v.20 no.1
• /
• pp.1-8
• /
• 2019

Fabrication of monolayer is important method for enhancing physical and chemical characteristics such as light shielding and antireflection while maintaining thin film properties. In previous studies, monolayers were fabricated by various methods on small substrates, but processes were complicated and difficult to form monolayers with large area. We used rod coating equipment with a small amount of coating liquid to form a HCP (hexagonal closed packing) coating of PMMA beads on PET(poly(ethylene terephthalate)) substrate with $20cm{\times}20cm$ size. We observed that changes in morphologies of monolayers by using the solvents with different boiling points and vapor pressures, by adapting surfactants on particles and by applying plasma treatment on substrates. The coverage was increased by 20% by optimizing the coating conditions including meniscus of beads, control of the attraction - repulsion forces and surface energy. This result can potentially be applied to optical films and sensors because it is possible to make a uniform and large-scale monolayer in a simple and rapid manner when it is compared to the methods in previous studies.

• Journal of Internet Computing and Services
• /
• v.20 no.5
• /
• pp.113-119
• /
• 2019

The key features of 5G mobile communications recently commercialized can be represented by High Data Rate, Connection Density and Low Latency, of which the features most distinct from the existing 4G will be low Latency, which will be the foundation for various new service offerings. AR and self-driving technologies are being considered as services that utilize these features, and 5G Network Latency is also being discussed in related standards. However, it is true that the discussion of E2E Latency from a service perspective is much lacking. The final goal to achieve low Latency at 5G is to achieve 1ms of air interface based on RTD, which can be done through Ultra-reliable Low Latency Communications (URLLC) through Rel-16 in early 20 years, and further network parity through Mobile Edge Computing (MEC) is also being studied. In addition to 5G network-related factors, the overall 5G E2E Latency also includes link/equipment Latency on the path between the 5G network and the IDC server for service delivery, and the Processing Latency for service processing within the mobile app and server. Meanwhile, it is also necessary to study detailed service requirements by separating Latency for initial setup of service and Latency for continuous service. In this paper, the following three factors were reviewed for initial setup of service. First, the experiment and analysis presented the impact on Latency on the Latency in the case of 1 Data Lake Setup, 2 CRDX On/Off for efficient power, and finally 3H/O on Latency. Through this, we expect Low Latency to contribute to the service requirements and planning associated with Latency in the initial setup of the required services.

• Journal of Digital Contents Society
• /
• v.19 no.4
• /
• pp.693-700
• /
• 2018

Virtual router redundancy protocol (VRRP) was designed as a solution to support fast fail-over in case of network failure. There exists virtual router which acts as default gateway in LAN, and the virtual router is dynamically elected between master and backup router. Through this protocol, end-hosts can be provided seamless network service. However, it needs expensive license fees and maintenance costs to adopt current commercial network operating systems. Furthermore, they are commonly enterprise proprietary software and inherently closed source. In order to tackle these problem, Open N2OS which is open source based open network software platform was developed. It has no dependency on hardware equipment, and provides high availability, scalability, various networking functions. In this paper, we handle VRRP operation and mechanism with related command line interface (CLI).

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.3
• /
• pp.65-70
• /
• 2002

This paper discusses the work-in-progress of a system to control a moving robot over the WWW(World Wide Web). That is, we describes the experimental results and control methods of system over the world wide web. The remote control of the system is controlled by accessing a simple form of interface that is connected to the server. For this application, a remote operator should have a general-purpose computer with Internet connection and a WWW browser to remotely operate the line-tracer through the Internet. As a remote operator summits an input by operating html files in the server, the program written in java is operated the equipment is being connected to the serial port. By being transmitted to the line-tracer through the infra-red sensor, the remote controlled signal is operated in distance. As a tool in order to identify the system's operation of the over the web is used the line-tracer. 

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.24-32
• /
• 2012

A large fraction of urban $PM_{10}$ concentrations is due to non-exhaust traffic emissions including road dust, tire wear particles, and brake lining particles. Although potential health and environmental impacts associated with tire wear debris have been increased, few environmentally and biologically relevant studies of actual tire wear debris have been conducted. Tire wear particles (TWP) are released from the tire tread as a result of the interaction between the tire and the pavement. Roadway particles (RP), meanwhile, are particles on roads composed of a mixture of elements from tires, pavements, fuels, brakes, and environmental dust. The main objective of present study is to identify the contribution of tires to the generation of RP and to assess the potential environmental and health impacts of this contribution. First, a mobile measurement system was constructed and used to measure the roadway particles on asphalt road according to vehicle speed. The equipment of the mobile system provides $PM_{10}$ concentrations by Dusttrak DRX and number density & size distribution measurements of fine and ultra-fine particles by a fast mobility particle sizer (FMPS) and an aerosol particle sizer (APS). When traveling on an asphalt road at constant speed, there is a clear tendency for PM10 concentration to increase slightly in accordance with an increase in the vehicle speed. It was also found that considerable brake wear particles and particles from tire/road interface were generated by rapid deceleration of the vehicle. The morphology and elements of the roadway particles were also analyzed using SEM-EDX technique.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.4
• /
• pp.505-509
• /
• 2011

Home network system makes it available for controlling inside home and for controlling from outside as well with personal computer, cellular phone or smart phone, by connecting diverse information equipments within home such as lighting, gas, and heating equipments with network. Integrated server and wall-pad, which form home network system, have demerits as saying of being high-priced and of needing to implement network infrastructure. This study suggested the intelligent home network system, which uses smart phone of supplementing these merits of home network system. It substituted high-specification input & output equipment in the currently and widely supplied smart phone for display and touch screen, which are user interface part of the existing wall-pad, and implemented the common wall-pad with low cost by concentrating management and control function of home network on smart phone.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.121-127
• /
• 2014

The functionality of BNWAS and its operations are investigated through its international standard. But the BNWAS is being used currently in the ship had difficulty in monitoring. Several kinds of data are generated from many equipments in BNWAS, such as NMEA-0183 data or NMEA-2000. In this paper, we have proposed a method of the multimedia data transmission using a communication protocol based on slower NMEA-0183, which is mainly used in BNWAS. Data compression techniques are needed for smooth streaming services of the multimedia data in the low data rate over the NMEA-0183 interface. Although these data are mainly used for the instruments of ship, their efficient transmission may be needed if they are managed to control the BNWAS equipment with sensors.

• KIISE Transactions on Computing Practices
• /
• v.23 no.4
• /
• pp.238-243
• /
• 2017

This paper presents a study regarding a systemic structure that forms a link between heterogeneous terminals and the WebRTC (Web real-time communication) based video-conferencing systems. This system consists of a WebRTC-based terminal, a signal server for the relaying of the necessary signals for media negotiations, an MCU provides an interworking interface for the heterogeneous terminal, and the heterogeneous terminals that interwork with the MCU. This technology enables the interoperability between the WebRTC-based video-conferencing solutions and the legacy devices. In addition to reducing the replacement costs regarding new-technology-based solutions, the existing legacy equipment enables the use of multiparty-conference, thereby increasing the use ability of the conferencing systems.