• Journal of Applied Reliability
• /
• v.12 no.3
• /
• pp.165-176
• /
• 2012

Hydrostatic bearing improves performance and life time of a product by avoiding solid friction and reducing viscosity friction with the help of creating pressure equilibrium between two faces doing relative motion. This study suggests failure analysis and test evaluation for a ball joint that adopts the hydrostatic bearing and introduces the entire process to improve reliability of the product by design improvement. A typical failure is growth of friction torque by solid friction, and its failure cause is determined and the improvement is proposed. Finally, reliability improvement is established by analysis of the results of before and after acceleration test.

• Journal of Environmental Science International
• /
• v.25 no.3
• /
• pp.395-403
• /
• 2016

This study examined the adsorption effect of aromatic pesticides by hollow fiber NF membrane on rejection and removal properties. Batch type adsorption test and hollow fiber NF membrane filtration were conducted with 5 different kinds of aromatic pesticides. 3 to 15 days were required to reach the equilibrium concentration and $0.3181{\sim}0.8094{\mu}g/cm^2$ were adsorbed to hollow fiber NF membrane. Since 5 hours of separation test were too short to keep steady state for permeate due to the repetition of sorption and desorption, longer times were required to evaluate the rejection performance of NF membrane. Sorption and desorption were confirmed by the separation test equipped with membrane and without membrane. Adsorption contribution of aromatic pesticides to hollow fiber membranes were shown to be ranged from 16.1% to 36.3% and indicated the difference considering sorption effect.

• Journal of Industrial Technology
• /
• v.12
• /
• pp.15-23
• /
• 1992

This research is to investigate the effect of base roughness of footing on characteristics of load-settlement curve. Parametric experiments of small scaled model test were performed with changing the properties of base roughness of model footing; Gluing the vinyl, aluminum, sand paper, sand beneath the model footing surface. The width of model footing and relative density of soil foundation were also changed to investigate their effects on settlement characteristics of footing. The ultimate bearing capacity as well as the initial slope of load-settlement curve obtained from test results were compared with those from limit equilibrium methods proposed by Terzaghi, Hansen and Meyerhof. From test results, it was confirmed that the base roughness affected the failure mechanisms of showing different shapes of slip lines formed beneath the footing.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.11a
• /
• pp.202-206
• /
• 2000

본 연구에서는 회전 자극기를 이용하여 성별에 따른 회전 평형감각 특성을 분석하였다. 피검자는 정상성인 남녀 각각 10명에 대해, 두부회전과 rotatory chair test(RCT)에 의한 회전자극 전과 후의 변화정도를 살펴보았고, COP, Flicker Test, 적외선 카메라를 이용한 체열 측정 등을 통해 전정자극 특성을 평가하였다. 그 결과 COP를 통한 신체동요도 측정 결과 회전자극 제시 후 두부회전의 경우 총 누적거리가 1.47배, RCT의 경우 1.78배까지 증가했고, 플리커 치는 여성(8.6%)이 남성(5%)보다 높게 나타났고, 여성이 남성보다 회전자극에 민감함을 알 수 있었다. 또한, 남녀 모두 회전 자극 후 눈 주위의 온도상승이 미소하게 일어남을 알 수 있었다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1994.09a
• /
• pp.119-122
• /
• 1994

An analytical procedure is described to estimate the mobilized tensile forces along the effective lengths of nails. Based on the horizontal focing displacements of a nailed-soil wall experiencing outward tilt about the toe with granular soil deposit, the variation of nail-soil friction coefficient is modeled. Also, the method of overall stability analysis of a nailed-soil wall is presented using the Morgenstem-Price limit-equilibrium slice method. The results predicted by the developed procedure are compared with test measurements. The comparisons show in general good agreement.

• Tunnel and Underground Space
• /
• v.7 no.2
• /
• pp.150-157
• /
• 1997

Various analytical, empirical and theoretical methods for slope stability assessment were applied on slopes to develop aggregate quarry optimally. Among them are block theory, stereographic analysis, RMR, SMR, limit equilibrium method and maximum likelihood. Test site was estimated that slopes were apt to fail although rock quality was good. Modified direction and dip angle was suggested for stability. To reduce the overbreak and to improve the stability, the vertical blasting was recommended for new subground level.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.257-264
• /
• 2001

This study presents the slope stability analysis results for the model slope test. The model slope was made of the soil reinforced by FPF(Fibrillated Polyprophylene Fiber). The shear strength properties of the soil reinforced by FPF fibers were evaluated through the direct shear tests. The model slope 1:1 and 1:1.5 were made and the load tests were performed. Back analysis using limit equilibrium method was carried out to evaluate the shear strength increase on the FPF reinforced slope. The factor of safety of the FPF reinforce slope increased about 23% over unreinforced slope.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.10
• /
• pp.5-12
• /
• 2011

This study was focused on the reactivity of furnace slag against cadmium to design the vertical drain method with reactive column for improving contaminated sea shore sediment. The kinetic sorption test was performed by changing the initial concentration and pH. Using pseudo-second-order model, the reactivity of furnace slag was quantitatively analyzed. Equilibrium removal amount ($q_e$) of furnace slag increased and rate constant ($k_2$) decreased with the increase of initial cadmium concentration. With the increase of pH, the equilibrium removal amount ($q_e$) and rate constant ($k_2$) increased in the same initial concentration. Required retention time was related to the inverse of the product of the equilibrium removal amount ($q_e$) multiplied by rate constant ($k_2$). The required retention time could be used to design the length of reactive column.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.8
• /
• pp.39-44
• /
• 2014

Effects of operating parameters on the breakthrough properties of Pb(II) by $Mn_3O_4$ coated activated carbon prepared by supercritical technique were investigated through fixed-bed column experiments. The mass transfer zone and equilibrium adsorption capacity were enhanced about 2.8 times for Pb(II) by $Mn_3O_4$ coating onto activated carbon. Increase of bed height enhanced the residence time of Pb(II) in adsorption zone, giving the higher breakthrough time, mass transfer zone and equilibrium adsorption capacity. Increase of flow rate reduced the residence time and diffusion of Pb(II) in adsorption zone, therefore decreased the equilibrium adsorption capacity. The higher inlet concentration of Pb(II) decreased the breakthrough time and mass transfer zone through the promotion of Pb(II) transfer onto adsorbent.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.9
• /
• pp.53-60
• /
• 2019

Purpose - The objective of this paper is to discover if there exists a relationship between the economic index and distribution industry index in Korean. Because of the distribution industry boom in the recent years, a lot of interest in the relationship between the economic index and distribution industry index in Korean and the economy has been generated. This article examine on the mutual influence between economic index and distribution industry index in Korean. Research design, data, and methodology - For this purpose, we use the vector-auto regression model, impulse response function and variance decomposition of the economic index and distribution industry index, Granger causality test using weekly data on the economic index and distribution industry price index in korea. The sample period is covering from January 2, 2010 to August 31, 2019. The VAR model can also be linked to cointegration analysis. Cointegration Analysis makes possible to find a mechanism causing x and y to move around a long-run equilibrium (Engle and Granger, 1987). This equilibrium means that external shocks may separate the series temporarily at any particular time, but there will be an overall tendency towards some type of long-run equilibrium. If variables are found to have this tendency they are said to be cointegrated and a long-run relationship between these series is established. These econometric tools have been applied widely into economics and business areas to analyze intertemporal linkages between different time series. Results - This research showed following main results. First, from the basic statistic analysis of the economic index and distribution industry index in Korean, the economic index and the distribution industry index in korea have unit roots. Second, there is at least one cointegration between the economic index and distribution industry index in Korean. Finally, the correlation between of the economic index and the distribution industry index in korea is (+) 0.528876. Conclusions - We find that the distribution industry price index Granger cause the economic index in korea. As a consequence, the distribution industry index affect the economic index in Korean. The distribution industry index to the economic index is stronger than that from the economic index to the distribution industry index.