• 상하수도학회지
• /
• 제21권5호
• /
• pp.581-587
• /
• 2007

In order to suggest the methodology for improving the equality of flow distribution in a distribution channel, wet tests were carried out for pilot plant which was scaled down to 1/8 of full scale distribution channel being operated in domestic K_water treatment plant. The correlation between various hydraulic variables and their effects on the equality of flow distribution was evaluated through wet tests using pilot plant. From the results of wet tests, the longitudinal baffle with orifices was installed in the distribution channel, the equality of flow distribution was improved on the condition that the Froude number in pilot plant was similar with that in the full scale channel. Also, the opening ratio of the orifices on the longitudinal baffled did not have influence on the performance of the equality of flow distribution when the average flow velocity and Froud number were relatively low (Froude number ${\fallingdotseq} 0.01$). In the other hand, the performance of the equality of flow distribution was improved with increasing the opening ration of on the longitudinal baffle under conditions of relatively high average flow velocity and high Froud number(${\gtrsim}0.1$)

• 상하수도학회지
• /
• 제21권5호
• /
• pp.571-579
• /
• 2007

This study was conducted to qualify the equality of the flow distribution from open channel between rapid mixing basin and flocculation basins in a domestic full-scale water treatment plant, and suggest a remedy for improving the equality. In order to evaluate the feasibility of the suggested remedy, computational fluid dynamics (CFD) technique are used, and for verifying the CFD simulation results wet tests were carried out for the pilot scale channel based on geometric similarity. From the results of CFD simulation and wet tests, it was investigated that the modification of hydraulic structure in the distribution channel, which is to install the longitudinal orifice baffle in flow direction, could improve the equality of the flow distribution. Also, in the case that Froude number is relatively small (Froude number <<0.03), the open ratio of orifices on the installed baffle hardly affects the equality of flow distribution.

• 상하수도학회지
• /
• 제26권3호
• /
• pp.423-430
• /
• 2012

This study was conducted to qualify the equality of the flow distribution from open channel between rapid mixing basin and flocculation basins in a domestic S_ water treatment plant, and to suggest a remedy for improving the equality. In order to evaluate the feasibility of the suggested remedy, computational fluid dynamics (CFD) technique are used, and for verifying the CFD simulation results tracer tests were carried out. From the results of CFD simulation and tracer tests, it was investigated that the modification of hydraulic structure in the distribution channel, which is to install the longitudinal orifice baffle in flow direction, could improve the equality of the flow distribution over 75%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.57.2-57.2
• /
• 2005

• 대한환경공학회지
• /
• 제35권12호
• /
• pp.918-928
• /
• 2013

각 응집지로의 유입유량 불균등현상은 대부분 정수장에서 직면하고 있는 중요한 문제점이다. 이와 같은 유량의 불균등현상은 응집지 분배수로의 구조, 지별 유출위어의 높이차 등과 관계가 있으나, 시설물 구조개선에 의한 유량의 균등화는 투자비용 대비 실효성이 크지 않은 문제점이 있다. 본 연구의 목적은 정수 시설물의 개선 없이 실험계획법(DOE, Design Of Experiment)과 반응표면분석법(RSA, Response Surface Analysis)을 이용한 유입밸브 개도율의 최적화로 각 응집지로의 유입유량을 균등하게 하는 것이다. 병렬로 연결된 6개 응집지의 유입밸브 개도율(%)과 유량분배율(%)을 각각 특성치(Y)와 인자(X)로 선정하고, 실험계획법과 반응표면분석법을 적용하여 지별 유량 균등분배를 위한 지별 유입밸브 개도율의 최적화 및 회귀식을 산출하였다. 최적화된 지별 유입밸브 개도율의 현장 적용결과, 지별 유량분배율의 표준편차는 3.80%에서 0.42%, 지별 침전수탁도의 표준편차는 0.29 NTU에서 0.03 NTU로 각각 감소하였다.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1386-1396
• /
• 2017

In this paper, a new approach is proposed to select the optimal sitting and sizing of distributed solar photovoltaic generation (SPVG) in a radial electrical distribution systems (EDS) considering load/generation uncertainties. Here, distributed generations (DGs) allocation problem is modeled as optimization problem with network loss based objective function under various equality and inequality constrains in an uncertain environment. A boundary power flow is utilized to address the uncertainties in load/generation forecasts. This approach facilitates the consideration of random uncertainties in forecast having no statistical history. Uncertain solar irradiance is modeled by beta distribution function (BDF). The resulted optimization problem is solved by a new Dynamic Harmony Search Algorithm (DHSA). Dynamic band width (DBW) based DHSA is proposed to enhance the search space and dynamically adjust the exploitation near the optimal solution. Proposed approach is demonstrated for two standard IEEE radial distribution systems under different scenarios.

• 물과 미래
• /
• 제28권2호
• /
• pp.155-168
• /
• 1995

본고는 개수로 마찰계수를 산정하거나 단면평균유속을 구하는 전통적인 방법의 경험식을 논의하였으며, 새로운 형태의 산정식을 제시하였다. 기존 경험식중 형태가 가능한 것은 차원의 일치를 기하기 위하여 수정하였으며, 등가조고를 도입하여 새로운 형태의 경험식을 제안하였다. 개수로에서의 마찰계수 분포도 원형판에서의 완난류 마찰계수 분포와 유사함을 고려하여 대부분의 관측자료는 완난류 구간에 드는 것으로 판단하였으며, 원형관 완난류 마찰계수 산정식을 수정하여 사각형 개수로 완난류 마찰계수 산정식을 개발하였다. 또한 차원의 일치를 이룬 새로운 형태의 경험식들을 포함하여 이들 산정식을 Bazin의 실험자료에 적용하여 비교 검토하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.56-63
• /
• 2015

The optimization is an important role in wide geographical distribution of electrical power market, finding the optimum solution for the operation and design of power systems has become a necessity with the increasing cost of raw materials, depleting energy resources and the ever growing demand for electrical energy. In this paper, the real coded biogeography based optimization is proposed to minimize the operating cost with optimal setting of equality and inequality constraints of thermal power system. The proposed technique aims to improve the real coded searing ability, unravel the prematurity of solution and enhance the population assortment of the biogeography based optimization algorithm by using adaptive Gaussian mutation. This algorithm is demonstrated on the standard IEEE-30 bus system and the comparative results are made with existing population based methods.

• 오토저널
• /
• 제11권1호
• /
• pp.20-30
• /
• 1989

The unsteady conjugate forced convection-conduction heat transfer from a plate fin is numerically studied. The external forced flow is steady but the temperature of the fin base is an exponential change with time. Therefore, the unsteady energy equations of the fluid and the fin are solved simultaneously under the conditions of equality in heat flux and temperature at the fluid-fin interface at every instant of time. Numerical results are given for various quantities of interest including the local heat transfer coefficient, the local heat flux, the total heat transfer rate and the temperature distribution of fin under the effects of the convection-conduction parameter and the ratio of thermal diffusivities. The results of the present numerical solution have been compared with those of the conventional fin theory.