• Steel and Composite Structures
• /
• 제4권6호
• /
• pp.437-452
• /
• 2004

A simplified seismic design procedure for steel structures with buckling-restrained braces (BRB) was proposed based on the energy balance concept and the equal energy assumption. The input seismic energy was estimated from a design spectrum, and the elastic and hysteretic energy were computed using energy balance concept. The size of braces was determined so that the hysteretic energy demand was equal to the hysteretic energy dissipated by the BRB. The validity of using equivalent single-degree-of-freedom systems to estimate seismic input and hysteretic energy demand in multi story structures with BRB was investigated through time-history analysis. The story-wise distribution pattern of hysteretic energy demands was also obtained and was applied in the design process. According to analysis results, the maximum displacements of the 3-story structure designed in accordance with the proposed procedure generally coincided with the target displacements on the conservative side. The maximum displacements of the 6- and 8-story structures, however, turned out to be somewhat smaller than the target values due to the participation of higher vibration modes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.962-969
• /
• 2000

Quality that character of energy is the same at every state in case of equal working fluid and net concept of material flow was applied to thermoeconomics about energy system, and we could naturally explain the suitable degree about this concept, also thermoecomic equations about general power plant was easily deduced. And deduced equations exactly corresponded with principle of thermoeconomics that overall input cost flow rate equal overall output cost flow rate. This equations is applied to gas turbine cogeneration power plant as one example and found the product unit cost. Also this product cost comparison could been naturally explained.

• Structural Engineering and Mechanics
• /
• 제10권4호
• /
• pp.405-426
• /
• 2000

Two approximate methods based on mechanism analysis suitable for seismic assessment/design of structural concrete are reviewed. The methods involve use of equal energy concept or equal displacement concept along with appropriate patterns of inelastic deformations to relate structure's maximum lateral displacement to member and plastic deformations. One of these methods (Clough's method), defined here as a ductility-based approach, is examined in detail and a modification for its improvement is suggested. The modification is based on estimation of maximum inelastic displacement using inelastic design response spectra (IDRS) as an alternative to using equal energy concept. The IDRS for demand displacement ductilities are developed for a single degree of freedom model subjected to several accelerograms as functions of response modification factor (R), damping ratios, and strain hardening. The suggested revised methodology involves estimation of R as the ratio of elastic strength demand to code level demand, and determination of design base shear using $R_{design}{\leq}R$ and maximum displacement, determination of plastic displacement using IDRS and subsequent local plastic deformations. The methodology is demonstrated for the case of a 10-story precast wall panel building.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.40-45
• /
• 1996

A new concept of equivalent homogenization is proposed. The concept employs new set of homogenized parameters: homogenized cross sections (XS) and interface matrix (IM), which relates partial currents at the celt interfaces. The idea of interface matrix generalizes the idea of discontinuity factors (DFs), proposed and developed by K.Koebke and K.Smith. The method of K.Smith can be simulated within framework of new method, while the new method approximates heterogeneous cell better in case of the steep flux gradients at the cell interfaces. The attractive shapes of new concept are: improved accuracy, simplicity of incorporation in the existing codes, equal numerical expenses in comparison to the K.Smith's approach. The new concept is useful for: (a) explicit reflector/baffle simulation; (b) control blades simulation; (c) mixed UO2/MOX core simulation, The offered model has been incorporated in the finite difference code and in the nodal code PANBOX. The numerical results show good accuracy of core calculations and insensitivity of homogenized parameters with respect to in- core conditions.

• 한국지진공학회논문집
• /
• 제7권3호
• /
• pp.47-55
• /
• 2003

본 연구에서는 등가 에너지 개념에 근거하여 비좌굴 가새골조의 간편한 내진설계방법을 제안하였다. 단자유도계로 치환된 구조물의 지진 입력에너지를 응답 스펙트럼으로부터 구한 후, 탄성에너지와 소성에너지를 등가 에너지 개념을 이용하여 산정한다. 이렇게 구한 소성에너지를 분배비에 따라 각 층에 분배하고, 모든 소성에너지는 가새에 의하여 소산된다고 가정하여 각 가새의 단면적을 산정할 수 있다. 제안된 방법을 검증하기 위하여 3층, 6층, 20층 가새골조를 제안된 방법으로 주어진 목표변위를 만족하도록 설계하고, 인공지진을 이용하여 결과를 검증하였다. 해석결과에 의하면 저층 건물의 최상층 변위는 비교적 목표변위를 만족하였으나, 20층 건물의 최상층 변위는 목표변위보다 매우 작아 가새가 과다하게 설계된 것으로 나타났다.

• Journal of Electrical Engineering and information Science
• /
• 제3권2호
• /
• pp.145-150
• /
• 1998

For practical application of the concept of chaos, we propose a chaotic state machine as a sequential system. Chaotic state machine which is suggested and implemented in this paper has chaotic motions relying on the dynamics only through the deterministic chaos function. Also, we present and verify that the properties of chaotic state machine is equal to the characteristics of chaos.

• 대한기계학회논문집
• /
• 제16권11호
• /
• pp.2189-2195
• /
• 1992

본 연구에서는 대향류 열교환기에 대하여 출력과 효율 등을 계산하는 예를 보 이고, 동시에 최대의 출력을 얻기 위한 조건들을 수치적으로 구하였다. 또한 열교환 기의 장치비용과 열원의 생성비용을 적절히 취급하여 경제적 최적조건에 대해서도 살 펴보고자 한다. 여기서 저온유체의 가용 에너지 획득량으로서 출력은 열전달로 인한 부분만을 생각하기로 한다.

• 대한한방내과학회지
• /
• 제16권1호
• /
• pp.17-32
• /
• 1995

The purpose of this is to understand the concept of Sacho on the basis of 'Sa-Sang philosophy(四象哲學)'. In oder to achieve this purpose, Sanjiao and Sacho were investigated, centering on the philophicalbasis, region. action. The conclusion would be summerized as follows. 1. Viewed in the light of a philosophical basis, Sanjiao is first recorded in Nae-Kyung(內經), a concept that Yin-Yang(陰陽), Oh-Hang(五行) in Nae-Kyung Medcine, the cosmos's order and it's moving rule could be directly applied to human body. On the contrary Sacho is a term first used by Lee Jae-Ma, a human-oriented concept that formed in Confucianism system. based on Sa-Sang type classifying in Sa-Sang Medicine. 2. Viewd in the light of a region, the upper part of Sacho is similar to the upper-jiao of Sanjiao, the mid-upper part of Sacha to the middle-jiao of Sanjiao, the mid-lower and the lower parts of Sacha to the lower-jiao of Sanjiao. But these regions are not equal to anatomical regions. Sanjiao and Sacha is similar concept from the view point of the upper and lower oder, but Sanjiao has only a concept of the upper and lower order, doesn't have a concept of the front and the rear, inside and outside. 3. Viewed in the light of a action, Sanjiao and Sacho is a similar concept from the view point of a large boundary in the life activity.Sanjiao explains the region of human body, setting imfortance on the viscera physiology, on the contrary Sacho explains the whole function of human body including one's heart's desire, physical constitution and the visceral physiolosy. 4. Viewed in the light of produsing-wasting activity. sanjiao and Sacho have both produsing action and wasting action. but Sacho has a more concrete concept of produsing action by using a term-Sa Hae(四海) 5. Viewed in the light of vital energy(氣)'s action, Sajiao give the first consideration to the rising and falling action of vital energy, on the contrary Sacho give the first consideration to the transversal circulation of vital energy and the deviation of it in each part. According to the above results, Sacho must be discussed separately from Sanjiao, it is recommended that further study is necessary to understand the concept of Sacho on the basis of Sa-Sang philosophy.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.908-914
• /
• 2008

The world is facing a serious energy problem which destroying the environment. In addition, fossil fuel such as oil and coal that caused global warming and the environmental problems due to acid rain had been gradually exhausted. To solve this problem that has crisis of energy, it is necessary time and effort for research and development of renewable energy in the future. As alternative energy, small hydropower generation which has output of less or equal to 100kW is attracting considerable attention. This is because of its small, simple, renewable, and large amount of energy resources. By using a small hydropower generator of which main concept is based on using the different water pressure levels in pipe lines, energy which was initially wasted by use reducing of a valve at the end of the pipeline, is collected by turbine in the small hydropower generator. In this study, we investigated the influence of the number of runner vanes on the characteristics of tubular-type hydroturbine.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2839-2844
• /
• 2007

Micro hydraulic power generation of which the output is less or equal to a 100kW is attracting considerable attention. This is because of its small, simple, renewable, and abundant energy resources. By using a small hydropower generator of which main concept is based on using the different water pressure levels in pipe lines, energy which was initially wasted by use of a reducing valve at the end of the pipeline, is collected by turbine in the hydropower generator. A propeller shaped hydroturbine has been used in order to use this renewable pressure energy. In this study, in order to acquire basic design data of tubular type hydraulic turbine, output power, head, efficiency characteristics due to the flow coefficient are examined in detail. Moreover influences of pressure and velocity distributions with the variations of runner vane angle on turbine performance are investigated by using a commercial CFD code.