• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.795-802
• /
• 1992

A numerical analysis is performed on the turbulent flow in the plain seal with injection. The parameters used in this study are as follows : Reynolds number, rotation speed, injection speed, clearance ratio, injection angle, and axial injection location. Flow pattern and leakage performance due to the variation of parameters are investigated. SIMPLER algorithm is used to solve the Navier-Stokes equation governing steady, incompressible turbulent flow and standard K- .epsilon. turbulent model is used to consider the turbulence effects. The leakage performance is significantly enhanced with injection. The increases of the injection flow rate and be rotation speed of the shaft cause the leakage performance to the increased. With the increase of the Reynolds number the leakage performance is diminished. At the injection angle of 90deg, the leakage coefficient has a minimum value. The pressure drop has a maximum value at axial center location but the injection location has little effect on the pressure drop. Clearance ratio has a significant effect on the pressure drop.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.4 s.25
• /
• pp.7-15
• /
• 2004

The design point of the cross-flow fan is generally based on the region within low static pressure and high flow rate. It relatively makes high dynamic pressure at low speed because a working fluid passes through an impeller blade twice. However, it has low static pressure efficiency between $30\%$ and $40\%$ because of relative high impact loss. The purpose of this study is to research the reciprocal relation among each parameter. Experiments and numerical analyses are conducted on effects of a stabilizer and a rearguider on performance analysis of a cross-flow fan. Two-dimensional, unsteady governing equations are solved using FVM, PISO algorithm, sliding grid system and standard $k-{\epsilon}$ turbulence model. Experiments are also carried out to estimate the performance of the modeled cross-flow fan. It is clarified that the rearguider of Archimedes type has excellent results for the most part.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.212-218
• /
• 2003

In order to analyze the heat transfer phenomena in the plasma flames, a mathematical model describing heat and fluid flow in an electric arc has been developed and used to predict heat transfer from the arc to the steel bath in a DC Electric Arc Furnace. The arc model takes the separate contributions to the heat transfer from each involved mechanism into account, i.e. radiation, convection and energy transported by electrons. The finite volume method and a SIMPLE algorithm are used for solving the governing MHD equations, i.e., conservation equations of mass, momentum, and energy together with the equations describing a $\kappa-\epsilon$ model for turbulence. The model predicts heat transfer for different currents and arc lengths. Finally these calculation results can be used as a useful insight into plasma phenomena of the industrial-scale electric arc furnace. From these results, it can be concluded that higher arc current and longer arc length give high heat transfer.

• Food Science of Animal Resources
• /
• v.41 no.5
• /
• pp.883-893
• /
• 2021

Clostridium difficile present in feces of food animals may contaminate their meats and act as a potential source of C. difficile infection (CDI) to humans. C. difficile resistance to antibiotics, its production of toxins and spores play major roles in the pathogenesis of CDI. This is the first study to evaluate C. difficile prevalence in retail raw animal meats, its antibiotics susceptibilities and toxigenic activities in Al-Jouf, Saudi Arabia. Totally, 240 meat samples were tested. C. difficile was identified by standard microbiological and biochemical methods. Vitek-2 compact system confirmed C. difficile isolates were 15/240 (6.3%). Toxins A/B were not detected by Xpect C. difficile toxin A/B tests. Although all isolates were susceptible to vancomycin and metronidazole, variable degrees of reduced susceptibilities to moxifloxacin, clindamycin or tetracycline antibiotics were detected by Epsilon tests. C. difficile strains with reduced susceptibility to antibiotics should be investigated. Variability between the worldwide reported C. difficile contamination levels could be due to absence of a gold standard procedure for its isolation. Establishment of a unified testing algorithm for C. difficile detection in food products is definitely essential to evaluate the inter-regional variation in its prevalence on national and international levels. Proper use of antimicrobials during animal husbandry is crucial to control the selective drug pressure on C. difficile strains associated with food animals. Investigating the protective or pathogenic potential of non-toxigenic C. difficile strains and the possibility of gene transfer from certain toxigenic/ antibiotics-resistant to non-toxigenic/antibiotics-sensitive strains, respectively, should be worthy of attention.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.3
• /
• pp.177-182
• /
• 2002

In this paper, we present a mathematical theory and algorithm consoucting some fractal sets. Among such fractal sets, the degree-n bifurcation set as well as the Julia sets is defined by extending the concept of the Mandelbrot set to the complex polynomial $Z^n$+c($c{\epsilon}C$, $n{\ge}2$). Some properties of the degree-n bifurcation set and the Julia sets have been theoretically investigated including the symmetry, periodicity, boundedness, and connectedness. An efficient algorithm constructing both the degree-n bifurcation let and the Julia sets is proposed using theoretical results. The mouse-operated software called "MANJUL" has been developed for the effective construction of the degree-n bifurcation set and the Julia sets in graphic environments with C++ programming language under the windows operating system. Simple mouse operations can construct ann magnify the degree-n bifurcation set as well af the Julia sets. They not only compute the component period but also save the images of the degree-n bifurcation set and the Julia sets to visually confirm various properties and the geometrical structure of the sets. A demonstration has verified the useful versatility of MANJUL.of MANJUL.

• Journal of the Korean Institute of Gas
• /
• v.2 no.1
• /
• pp.28-39
• /
• 1998

This study investigated the natural convection and radiation in a rectangular enclosure with ceiling vent experimentally and numerically. A heat source is located on the center of the bottom surface. The analysis was peformed a pure convection and is combination of natural convection and radiation. The shape of the considered two dimensional model is a square whose center of ceiling($30\%$) is opened. The numerical simulations are carried out for the pure natural convection case and the combined heat transfer case by using the SIMPLE algorithm. For the turbulent flow, Reynolds stresses are closed by the standard $k-{\epsilon}$ model and the wall function is used to determine the wall boundary conditions. The experiment was performed on the same geometrical shape as the computations. The radiative heat transfer is analized by the S-N discrete ordinates method. The results of pure natural convection are compared with those of combined heat transfer by the velocity vectors, stream lines, isothermal lines. The results obtained are as follows 1. Comparing the results of pure convection with those of the combined convection-radiation through the shape of stream lines, isothermal lines are similar to each other. 2. The temperature fields obtained by numerical method are compared to those obtained by experimental one, and it is found that they are showed mean relative error $8.5\%$. 3. Visualization bt smoke is similar to computational results.