• Toxicological Research
• /
• v.17 no.3
• /
• pp.181-186
• /
• 2001

The estrogenic potency of bisphenol A using reverse trancriptase-PCR response of liver vitellogenin mRNA in male carp was studied. For this, six combination of primers which were synthesized on the basis of cDNA consensus region of various species, were evaluated and one pair of primers was selected as the best to show 286 bp size-transcript. By using the selected primers, vitellogenin mRNA induction in carp treated with bisphenol A was measured and the chemical showed dose-and time-dependent Induction response. From this result, it was concluded that RT-PCR technique wing the selected primers in this study can be wed to monitor the estrogenic effects exerted In carp living in Korean freshwater.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1887-1891
• /
• 2008

In this paper, we dealt with a partial discharge (PD) measurement method that has been accepted as an effective and non-destructive technique to estimate insulation performance of low-voltage induction motors. The PD measurement system consists of a coupling network, a low noise amplifier, and associated electronics. A shielded box was used to reduce environmental noise. Frequency characteristic of the coupling network was estimated by a sinusoidal signal input, and the low cut-off frequency of the coupling network was 1 MHz (-3 dB). Also, we carried out a calibration test for the PD measurement system. Sensitivity of the system was of 84 m$V_{max}$/pC between stator winding and enclosure. In application test on a low-voltage three phase induction motor (5 HP), we could detect 88 pC at AC 800 $V_{max}$.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.2
• /
• pp.154-158
• /
• 2013

Reduction of electromagnetic vibration and acoustic noise from three-phase squirrel-cage induction motors (IMs) is very important, particularly from the standpoint of environmental considerations. Although the electromagnetic vibration of IMs has been studied for several years, the relationships between the radial distribution of the electromagnetic vibration and noise and the electromagnetic forces responsible for them have not yet been analyzed in sufficient detail. In the present study, we investigated this relationship experimentally for a small IM under different load conditions. Our results clearly show that the radial distributions of the dominant electromagnetic vibration and noise components match the mode shape of the dominant electromagnetic force producing these components.

• Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.55-59
• /
• 2013

Before avionics equipment are installed in aircraft, several environmental tests such as temperature, vibration, lightning, fire etc. must be conducted. One of the environmental tests is to substantiate protection designs of lightning indirect effect. It can be showed through RTCA DO-160G, section22 "Lightning Induced Transient Susceptibility" test. An additional test of aircraft level is required as well after installation of avionics equipment.

• Environmental Analysis Health and Toxicology
• /
• v.18 no.2
• /
• pp.137-143
• /
• 2003

To validate and to estimate the chemical hazard playa very important role to environment and human health. The detection of many synthetic chemicals used in industry that may pose a genetic hazard in our environment is of great concern at present. Since these substances are not limited to the original products, and enter the environment, they have become widespread environmental pollutants, thus leading to a variety of chemicals that possibly threaten the public health. In this resepct, the clastogenicity of 8 synthetic chemicals was evaluated with bone marrow micronucleus assay in mice. The positive control, mitomycin C(2mg/kg,i.p.) revealed significant induction ratio of percentage of micronucleated polychromatic erythrocytes/l,000 polychromatic erythrocytes compared to carboxymethylcellulose control. The chemicals with relatively high LD$\_$50/ value such as phenylisocyanate (CAS No. 103-71-9), m-aminochlorobenzene (CAS No. 108-42-9) and 2-chloro-4-nitroaniline (CAS No. 121-87-9) revealed no significant induction of micronucleated polychromatic erythrocytes in mice. From this results, 8 synthetic chemicals widely used in industry have revealed no significant micronucleus induction of clastogenicity in mice in this experiment.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.05a
• /
• pp.107-107
• /
• 2003

The heavy metal cadmium is a xenobiotic toxicant of environmental and occupational concern and it has been classified as a human carcinogen. Inhalation of cadmium has been implicated in the development of emphysema and pulmonary fibrosis, but, the detailed mechanism by which cadmium induces adverse biological effects is not yet known. Therefore, we undertook the investigation of genes that are induced after cadmium exposure to illustrate the mechanism of cadmium toxicity For this purpose, we employed the polymerase chain reaction-based suppression subtractive hybridization technique. We identified 29 different cadmium-inducible genes in human peripheral mononuclear cells, such as macrophage migration inhibitory factor, lysophosphatidic acid acyltransferase-${\alpha}$, enolase-1${\alpha}$, VEGF, Bax, neuron-derived orphan receptor-1, and Nur77, which are known to be associated with inflammation, cell survival, and apoptosis. Induction of these genes by cadmium treatment was further confirmed by semi-quantitative reverse-transcription polymerase chain reaction. Further, we found that these genes were also induced after cadmium exposure in normal human lung fibroblast cell line, WI-38, suggesting potential use of this induction profile to monitor cadmium toxicity in the lung. Next, Nur77, one of cadmium-inducible genes, was further studied since the products of Nur77 are known to be involved in the apoptotic process of lung cells. Following cadmium treatment, Nur77 gene expression was increased at protein-level in A549 cells. Consistently, the reporter containing Nur77 binding sequence was activated by 2.5-fold after exposure to cadmium in reporter gene analysis by transient transfection experiments. When the plasmid encoding dominant negative Nur77 that represses the transcriptional function of wild-type Nur77 was transfected into A549 cells, the expression of Bax was significantly reduced, suggesting that induction of Nur77 was an important process in cadmium-induced apoptosis in the cells. Cadmium induced the expression of Nur77 in vivo, confirming the relevance of the data obtained in viro. Together our results suggest that Nur77 gene expression in exposure to cadmium leads apoptosis of lung cells which may cause pathological changes in lung.

• Journal of Plant Biotechnology
• /
• v.36 no.2
• /
• pp.163-169
• /
• 2009

Dendropanax morbifera (Araliaceae) is an endemic species in Korea and distributed in the southern part of Korea. The roots and stems of this plant have been used for folk medicine for the treatment of migraine headache, dysmenorrheal, and remove wind dampness and for Vanishes production. Production of adventitious roots in D. morbifera by in vitro cultures could be used as alternatives materials. Leaf, stem, and root segments from D. morbifera seedling were cultured on Murashige and Skoog (MS) medium supplemented with 3.0 mg/L IBA and 30 g/L sucrose. After 4 weeks of culture, the highest induction of adventitious roots was obtained from the leaf segment. Frequency of adventitious root formation on medium with various kinds of auxins (IAA, NAA, 2,4-D, and IBA) and various concentrations of IBA (0, 0.1, 0.5, 1.0, 3.0, and 5.0 mg/L) was tested. The maximum induction of adventitious root was obtained on medium with 1.0 mg/L IBA. In liquid culture, growth of root was best 1/2MS medium supplemented with 1.0 mg/L IBA and 30 g/L sucrose. Adventitious roots were cultured in 5 L bioreactor containing 1/2 MS medium supplemented with 1.0 mg/L IBA and 30 g/L sucrose and mass-production of adventitious roots was successfully achieved. This study demonstrated for the first time to produce adventitious roots in D. morbifera.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1557-1565
• /
• 2010

Methyl paraben (MP), which is used as a preservative in pharmaceutical and cosmetic (shampoo) products, foods and beverages, enters into the aquatic environment and can pose a potential fish health hazard. In this experiment, effects of MP were evaluated in adult male common carp (Cyprinus carpio) by exposing them to fractions (1/$143^{rd}$ to 1/29th) of the $LC_{50}$ dose with every change of water for 28 days. Vitellogenin induction, metabolic enzymes, somatic indices and bioaccumulation were studied at weekly intervals. The $96^{th}$ h $LC_{50}$ of MP in fingerlings was 120 mg/L. Compared to the control, except for increases (p<0.01) in alkaline phosphatase (EC 3.1.3.1), alanine aminotransferase (EC 2.6.1.2) and liver size, there were decreases (p<0.01) in activity of acid phosphatase (EC 3.1.3.2), aspartate aminotransferase (EC 2.6.1.1), and testiculosomatic index following exposure to any dose of MP. Vitellogenin induction was significantly higher (p<0.01) in exposed than unexposed (control) fish. The bioaccumulation of MP in testis, liver, brain, gills and muscle tissues of fish increased significantly (p<0.01) with increase of dose from 0.84 ppm to 1.68 ppm. Dose and duration of exposure (p<0.01) indicated that an exposure period of 1 to 2 weeks was sufficient to cause changes in the quantifiable parameters studied. Fish exposed to 4.2 ppm MP became lethargic after the $26^{th}$ d. Histologically, degeneration, vacuolization and focal necrotic changes in liver and fibrosis-like changes in testicular tissue were noted.

• Horticultural Science & Technology
• /
• v.35 no.2
• /
• pp.252-264
• /
• 2017

Tea is one of the most consumed beverages worldwide and the relatively high levels polyphenols is benefit for health. In this study, we developed an efficient system for proliferation of callus from 'Anji Baicha', a cultivar of tea (Camellia sinensis). Callus tissue was initially induced by culturing leaf explants on medium containing different plant growth regulators. For callus induction, thidiazuron (TDZ) was more effective than 2,4-dichlorophenoxyacetic acid (2,4-D), ${\alpha}-naphthalene$ acetic acid (NAA), and $N^6-benzyladenine$ (BA). The frequency of callus induction from leaf explants reached 90.21% on $1.0mg{\cdot}L^{-1}$ TDZ and the developed callus was reddish and friable. We also tested the effect of different concentrations of NAA, 2,4-D, indole 3-acetic acid (IAA), BA, and TDZ, alone and in combinations, on callus proliferation. Medium supplemented with TDZ in combination with IAA was suitable for callus proliferation and accumulation of tea polyphenols. The growth index value and tea polyphenol content of callus cultured on MS medium containing $0.5mg{\cdot}L^{-1}$ TDZ and $1.0mg{\cdot}L^{-1}$ IAA was maximally 1,351% and 23.24%, respectively, and the relative abundance of epicatechin was as high as 17.449%. We also measured the antioxidant activity of all samples and the callus with the highest tea polyphenol content also exhibited high potential radical scavenging activity.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.3
• /
• pp.154-161
• /
• 2005

This paper proposes a speed-sensorless induction motor control system using a rotor speed compensation. To explain the proposed system, this paper describes an induction motor model in the synchronous reference frame for the vector control. The rotor flux is estimated by the rotor flux observer using the reduced-dimensional state estimator technique. The estimated rotor speed is directly obtained from the electrical frequency, the slip frequency, and the rotor speed compensation with the estimated q-axis rotor flux. The error of the rotor time constant is indirectly reflected in the rotor speed compensation using the compensation of the flux error angle. To precisely estimate the rotor flux, the actual value of the stator resistance, whose actual variation is reflected, is derived. An implementation of pulse-width modulation (PWM) pulses using an effective space vector modulation (SVM) is briefly mentioned. For fast calculation and improved performance of the proposed algorithm, all control functions are implemented in software using a digital signal processor (DSP) with its environmental circuits. Also, it is shown through experimental results that the proposed system gives good performance for the speed-sensorless induction motor control.