• Journal of Radiation Protection and Research
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2003

The periodic safety review of operational nuclear power plants requires that the plants should keep a well organized environmental monitoring program. The past records of environment monitoring data were analyzed. and the tritium concentrations of the samples in the surface and ground water around Kori site were measured. It was shown that the tritium concentrations around the Kori site were slightly higher than that of natural background. The change of background tritium concentration was estimated through a numerical modeling. Two different versions of 7 compartments model - the world and the northern hemisphere - defined in NCRP-62 were modeled for the global tritium cycling. The numerical solution of the model was obtained using a computer program, AMBER. The four cases of tritium source-terms into the atmosphere were considered. The results showed that the tritium concentration in the surface soil water was higher than that in sea water or surface stream water. Also, it was shown that the tritium produced by the interaction between cosmic rays and the gases were the major source of tritium, and the tritium produced by nuclear weapon test decreased considerably.

• Journal of the Korean Society for Railway
• /
• v.17 no.6
• /
• pp.410-414
• /
• 2014

In this study, the behavior of urban subway tunnels is measured using instrumentation sensors installed in the lining concrete inside subway tunnels in order to analyze their behavior according to temperature variations. It is observed that the stresses of the concrete lining, tunnel convergence, and cracks change according to the temperature variations. However, the crack deformation differs depending on the size and status of the crack. In addition, this study proposes a correction formula for the lining stress and tunnel convergence through numerical analyses of the concrete lining according to the temperature variations. The results of this research can be used in the tunnel maintenance considering the tunnel behavior depending on the temperature variations in the tunnel.

• Geophysics and Geophysical Exploration
• /
• v.15 no.1
• /
• pp.23-32
• /
• 2012

The comparison between time-lapse seismic datasets is the most popular method in the reservoir monitoring. The method of extracting the changes only due to the change in the reservoir is the essential technique in the comparison of time-lapse seismic datasets. In the paper, the conventional cross-equalization approaches and an enhanced optimized approach have been tested and compared each other. As conventional approaches, the bandwidth equalization and phase rotation methods have been tested in frequency, time and mixed domains, respectively and their results were compared each other. In order to overcome the limit of the conventional approaches, which loses high frequency components, a new constrained optimum filtering method was proposed and experimented. The new constrained filtering method has shown the improvement in broadening the bandwidth of the components of reservoir changes by acquiring optimized match filter.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.3
• /
• pp.562-577
• /
• 2014

A reliable steady/transient hydro-elastic analysis is developed for flexible (composite) marine propeller blade design which deforms according to its environmental load (ship speed, revolution speed, wake distribution, etc.) Hydro-elastic analysis based on CFD and FEM has been widely used in the engineering field because of its accurate results however it takes large computation time to apply early propeller design stage. Therefore the analysis based on a boundary element method-Finite Element Method (BEM-FEM) Fluid-Structure Interaction (FSI) is introduced for computational efficiency and accuracy. The steady FSI analysis, and its application to reverse engineering, is designed for use regarding optimum geometry and ply stack design. A time domain two-way coupled transient FSI analysis is developed by considering the hydrodynamic damping ffects of added mass due to fluid around the propeller blade. The analysis makes possible to evaluate blade strength and also enable to do risk assessment by estimating the change in performance and the deformation depending on blade position in the ship's wake. To validate this hydro-elastic analysis methodology, published model test results of P5479 and P5475 are applied to verify the steady and the transient FSI analysis, respectively. As the results, the proposed steady and unsteady analysis methodology gives sufficient accuracy to apply flexible marine propeller design.

• Journal of Korea Water Resources Association
• /
• v.48 no.2
• /
• pp.137-147
• /
• 2015

This study performed the systematic classification of the various types of riffles and analyzed their physical and hydraulic characteristics at the Hongcheon River and Seomjin River. The riffles are classified into the long type and the wide type by their ratio of length and width, and also classified into the convergent type and the divergent type by their width change along flow direction. They are also classified into the falling type, the running type, the undular wave and the undular jump by their surface profiles. The falling type and the running type usually occur near the cobbles with multiple diameters, whereas the undular wave and the undular jump occur near the small pebbles. They showed the upward convex type at the middle part, and the slope gets bigger at the downstream part.

• Journal of Korea Water Resources Association
• /
• v.40 no.11
• /
• pp.909-920
• /
• 2007

River restoration and environmental improvement projects have been peformed by social needs, therefore methodology for evaluating such projects must be provided. The PHysical HABitat SIMulation system (PHABSIM) is proposed as a tool for the assessment of hydraulic habitat suitability for aquatic species related to flow regime in river. This study evaluates the change of physical habitat for Zacco platypus according to small dam removal and the model suitability by applying PHABSIM to the reach where small dam was removed. It is shown that the physical habitat is generally increased and improved where the small dam was removed. However, physical habitat in the spawning stage that has a weak swimming speed is decreased by increased flow velocity in the upstream area of small dam, so proper countermeasure for that condition should be needed. Consequently, PHABSIM can be effectively used to provide methodology for assessment and necessity of various river projects including a removal of out-aged hydraulic structures.

• Journal of Korea Water Resources Association
• /
• v.47 no.1
• /
• pp.1-10
• /
• 2014

This study aimed to analyze water cycle at Taehwa river, Dongcheon, Hoiya river and Cheongryang cheon in Ulsan city using CAT model developed by Korea Institute of construction technology. To apply CAT model, we separated Teahwa river into 25, Dongcheon into 11, Hoiya river into 17 and Cheongryangcheon into 5 subbasins and discriminated between contribution runoff basins and source basins. The results of water cycle analysis performed using rainfall datas measured from 1975 and 2008 and hydrologic datas of change of land use etc. were that surface runoff increase and interflow decrease, caused by the increase of impervious area. The increases of surface runoff at the basin of Taehwa river and Dongcheon which is a tributary of Taehwa river were small and similar to each other respectively as 1.7% and 2.4%, and increased high rate of 3.2% and 7.7% in Hoiya river and Cheongryangcheon including subbasins which are having high rate of urbanization.

• Korean Journal of Plant Resources
• /
• v.25 no.4
• /
• pp.394-400
• /
• 2012

Contents of soyasaponin group B were compared according to two regions and ten varieties by HPLC. Those compounds were known to be beneficial for health. After soyasaponins were isolated and identified, those isolated compounds were used for HPLC analysis. The contents of soyasaponin were very different by regions but highest in the soybean with black seed coat. It was appeared that environmental difference for soybean growth could strongly change of soyasaponin contents.

• Journal of Integrative Natural Science
• /
• v.11 no.1
• /
• pp.30-38
• /
• 2018

CALPUFF is one of the recommended air pollution models by EPA with AERMOD. It has been used to simulate the ambient concentration of critical air pollutants as well as non-critical pollutants such as persistent organic matters and the organic materials causing odor. In this model, the air pollutants go through dispersion, transportation, chemical reaction, and deposition process. These mechanisms are significantly influenced by meteorological condition. This study produces the meteorological field in three different methods for the simulation of $SO_2$ using CALPUFF: 1) CALMET model by using both ground-level and aerological observation, 2) CALMET model by using MM5 results with NCEP/NCAR reanalyzed data, 3) CALMET model by using MM5 results in which FDDA is applied with NCEP/NCAR reanalyzed data as well as the meteorological data of Korea Meteorological Administration. As a result of CALPUFF model, the resolved concentration of $SO_2$ showed different behaviors in three cases. For the first case, the fluctuation of SO2 concentration was frequently observed while the fluctuation is reduced in the second and third cases. In addition, the maximum concentration of $SO_2$ in the first case was about 2~3 times higher than the second case, and about 4~6 times higher than the third case. These results can be caused by the accuracy of the resolved meteorological field. It is inferred that the meteorological field of the first case could be less accurate than other two cases. These results show that the use of correct meteorological data can improve the result of dispersion model. Moreover, the contribution of various sources such as point, line, and area sources on the ambient concentration of air pollutant can be roughly estimated from the sensitivity analysis.

• Membrane Journal
• /
• v.15 no.4
• /
• pp.320-329
• /
• 2005

Polyamide membrane degradation by chlorine has been studied to improve membrane durability. In this study, it was found that the salt rejection was reduced rapidly and flux of the membrane was increased slowly far membrane treated under chlorine condition. In order to improve resistance to chlorine of the polyamide reverse osmosis membrane, fluorine-containing silane coupling agent (FSCA) was introduced to surface modification. Surface properties and chlorine resistance of silane modified membrane were compared with virgin membrane. It was found that the surface of silane modified membrane has dense structure according to FSCA concentration increasing. The results of surface analysis suggest that FSCA retrieved a severe change in the hydrophobicity and surface roughness. In addition, it appears that FSCA can enhance chlorine resistance due to the interaction of such substance with free radical chlorine.