• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.29-38
• /
• 1990

A totally, new approach of Lagrangian formulation named 'Pseudo Lagrangian Formulation(PLF)' for large deformation analysis of continue and structures by the finite of element method has been presented, and the efficiency and accuracy of nonlinear analysis beam element formulated by PLF has been discussed by solving several numerical examples. In PLF, the deformation of a body is maeasured by assigning a nonphysical 'Pseudo' configuration as reference. The Lagrangian deformation and the finite element mapping of the traditonal Lagrangian approaches are then carried out directly at the same time, The result of numerical tests shows superior performance of PLF to the traditional Lagrangian methods, Applications of PLF to small and finite deformation problems indicate that PLF not only serves as an alternative but has certain implementational advantages over total or updated Lagrangian formulations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.207-217
• /
• 2016

Permeability can not be expressed as a function of porosity alone, it depends on the porosity, pore size and distribution, and tortuosity of pore channels in concrete. There has been considerable interest in the relationship between microstructure and transport in cementitious materials, however, it is very rare to deal with the theoretical study on gas permeability coefficient in connection with carbonation of concrete and the effect of volumetric fraction of cement paste or aggregate on the permeability coefficient. The majority of these researches have not dealt with this issue combined with carbonation of concrete, although carbonation can significantly impact on the permeability coefficient of concrete. In this study, fundamental approach to compute gas permeability of (non)carbonated concrete is suggested. For several compositions of cement pastes, the gas permeability coefficient was calculated with the analytical formulation, followed by a microstructure-based model. For carbonated concrete, reduced porosity was calculated and this was used for calculating the gas permeability coefficeint. As the result of calculation of gas permeability for carbonated concrete, carbonation leaded to the significant reduction of gas permeability coefficient and this was obvious for concrete with high w/c ratio. Meanwhile, the relationship between gas permeability and water permeability has a linear function for cement paste based on Klinkenberg effect, however, which is not effective for concrete. For the evidence of the modeling, YOON's test was accomplished and these results were compared to each other.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.501-514
• /
• 2015

Earthwork is a basic operation for all forms of civil works and affects construction time, cost and productivity. It is a mechanized operation that needs various construction equipment as a group and uses a lot of fuel for construction equipment. But, the problem is that earthwork operation is usually performed by equipment operator's heuristic and intuition, which can cause low productivity, high fuel consumption, and high carbon dioxide emission. As one of solutions for this problem, the fleet management system for construction equipment is suggested for effective earthwork planning, optimal equipment allocation, efficient machine operation, fast information exchange, and so forth. The purpose of this research is to suggest core methods for developing the equipment fleet management system. The methods include 3D solid parametric model generation, soil distribution using Cctree data structure, equipment fleet construction and equipment fleet operation. A simulation test is performed to verify the effectiveness of the equipment fleet management system in terms of equipment operating ratio, fuel usage, and $CO_2$ emission.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5B
• /
• pp.475-481
• /
• 2011

The TMDL standard flow as applying watershed management regime uses the average low flow of past 10 years. Moreover, the TMDL implementation assessment has been enforced through management of pollutant load satisfied objective water quality. Even though the present allocation and management through averaged low flow are still convenient, they are not enough to solve ultimate goals of watershed management to keep up recovery of water body. To maintain the same water quality concentration, the standard flow is required to consider total discharge in management plan which helps to keep healthy ecosystem. In view of this, it would be possible to approach reasonable assessment by reflecting variably changeable discharge from precipitation-streamflow relation and the TMDL standard establishment considering artificial regulated flow. Therefore, this study attempts to develop the TMDL method using Load Duration Curve (LDC) and Streamflow-Load Rating Curve (QLRC) considering total discharge and finds drawbacks with solutions as applying on Nakdong river TMDL unit watershed. Finally, this research evaluates possibility of application on pollutant load allocating and implementation assessment in Korea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.11
• /
• pp.1824-1836
• /
• 2020

Objective: On the hypothesis that grazing of cattle prompts organs to secrete or internalize circulating microRNAs (c-miRNAs) in parallel with changes in energy metabolism, we aimed to clarify biological events in adipose, skeletal muscle, and liver tissues in grazing Japanese Shorthorn (JSH) steers by a transcriptomic approach. Methods: The subcutaneous fat (SCF), biceps femoris muscle (BFM), and liver in JSH steers after three months of grazing or housing were analyzed using microarray and quantitative polymerase chain reaction (qPCR), followed by gene ontology (GO) and functional annotation analyses. Results: The results of transcriptomics indicated that SCF was highly responsive to grazing compared to BFM and liver tissues. The 'Exosome', 'Carbohydrate metabolism' and 'Lipid metabolism' were extracted as the relevant GO terms in SCF and BFM, and/or liver from the >1.5-fold-altered mRNAs in grazing steers. The qPCR analyses showed a trend of upregulated gene expression related to exosome secretion and internalization (charged multivesicular body protein 4A, vacuolar protein sorting-associated protein 4B, vesicle associated membrane protein 7, caveolin 1) in the BFM and SCF, as well as upregulation of lipolysis-associated mRNAs (carnitine palmitoyltransferase 1A, hormone-sensitive lipase, perilipin 1, adipose triglyceride lipase, fatty acid binding protein 4) and most of the microRNAs (miRNAs) in SCF. Moreover, gene expression related to fatty acid uptake and inter-organ signaling (solute carrier family 27 member 4 and angiopoietin-like 4) was upregulated in BFM, suggesting activation of SCF-BFM organ crosstalk for energy metabolism. Meanwhile, expression of plasma exosomal miR-16a, miR-19b, miR-21-5p, and miR-142-5p was reduced. According to bioinformatic analyses, the c-miRNA target genes are associated with the terms 'Endosome', 'Caveola', 'Endocytosis', 'Carbohydrate metabolism', and with pathways related to environmental information processing and the endocrine system. Conclusion: Exosome and fatty acid metabolism-related gene expression was altered in SCF of grazing cattle, which could be regulated by miRNA such as miR-142-5p. These changes occurred coordinately in both the SCF and BFM, suggesting involvement of exosome in the SCF-BFM organ crosstalk to modulate energy metabolism.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.8
• /
• pp.1085-1090
• /
• 2002

Genetic parameters for birth weights (BWT), calving ease scores observed from calves born by heifers (CEH), and calving ease scores observed from calves born by cows (CEC) were estimated using Bayesian methodology with Gibbs sampling in different threshold animal models. Data consisted of 77,458 records for calving ease scores and birth weights in Gelbvieh cattle. Gibbs samplers were used to obtain the parameters of interest for the categorical traits in two univariate threshold animal models, a bivariate threshold animal model, and a three-trait linear-threshold animal model. Samples of heritabilities and genetic correlations were calculated from the posterior means of dispersion parameters. In a univariate threshold animal model with CEH (model 1), the posterior means of heritabilities for calving ease was 0.35 for direct genetic effects and 0.18 for maternal genetic effects. In the other univariate threshold model with CEC (model 2), the posterior means of heritabilities of CEC was 0.28 for direct genetic effects and 0.18 for maternal genetic effects. In a bivariate threshold model with CEH and CEC (model 3), heritability estimates were similar to those in unvariate threshold models. In this model, genetic correlation between heifer calving ease and cow calving ease was 0.89 and 0.87 for direct genetic effect and maternal genetic effects, respectively. In a three-trait animal model, which contained two categorical traits (CEH and CEC) and one continuous trait (BWT) (model 4), heritability estimates of CEH and CEC for direct (maternal) genetic effects were 0.40 (0.23) and 0.23 (0.13), respectively. In this model, genetic correlation estimates between CEH and CEC were 0.89 and 0.66 for direct genetic effects and maternal effects, respectively. These estimates were greater than estimates between BWT and CEH (0.82 and 0.34) or BWT and CEC (0.85 and 0.26). This result indicates that CEH and CEC should be high correlated rather than estimates between calving ease and birth weight. Genetic correlation estimates between direct genetic effects and maternal effects were -0.29, -0.31 and 0.15 for BWT, CEH and CEC, respectively. Correlation for permanent environmental effects between BWT and CEC was -0.83 in model 4. This study can provide genetic evaluation for calving ease with other continuous traits jointly with assuming that calving ease from first calving was a same trait to calving ease from later parities calving. Further researches for reliability of dispersion parameters would be needed even if the more correlated traits would be concerned in the model, the higher reliability could be obtained, especially on threshold model with property that categorical traits have little information.

• The KIPS Transactions:PartD
• /
• v.13D no.2 s.105
• /
• pp.271-278
• /
• 2006

This paper presents industry feedback and a case of improvement trial on enabling reuse driven software development which is one of several activities to improve software quality and productivity in a company which develops software that are embedded into consumer electronic products. Several case studies will be introduced that are related to software reuse strategies and practices to show how to establish environment for reuse basis in a company, how to apply it to development team and project and how to improve that through trials and errors. To enable reuse-oriented software development in a huge company, integrated and focused approach is needed among technical, management and environmental point of view. We tried to solve that problem in technical field with reuse method, in management filed with reuse metric and in environment field with reuse repository. The characteristics of our software development environment could be summarized as below. The first, embedded software which would not independent to hardware devices and the second, it is very huge company which develops extremely various products by many different organization with different domain characteristics and the third, development lead time is extremely short and many variation models are stems from basic models. We expect that our study would give contribution to industry struggling to solve similar problem for presenting our experience and could be a reference model for enabling software reuse in a real world practically.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.337-347
• /
• 2018

The government has been operating residential improvement projects through the "Act on the Maintenance and Improvement of Urban Areas and Dwelling Conditions for Residents" as a type of a remedial measure for deteriorated residential areas. However, in recent years, the residential improvement projects have experienced difficulties due to the effects of various factors including the slowdown in economic growth. After observing the depression in a number of projects, various studies have been carried out to investigate the causality and improve the promotion of the residential improvement projects. In the trend of research, this study aims to analyze the effects of land and building characteristics on the improvement projects of Busan Metropolitan City. The dependent variables of the study represent different phases of improvement project as specified in the "Act on the Maintenance and Improvement of Urban Areas and Dwelling Conditions for Residents". The independent variables represent land and building characteristics which refer to the criteria used in the designation process of maintenance area according to the act. The empirical analysis uses the ordered logit model. The results from the analysis suggest that geographical condition, factors related to the number of union members, factors related to the parcel price and condition of a location have impact on the promotion of the improvement project. The results of the analysis show that majority of the factors are related to the economic feasibility of the projects. Residential improvement project is a part of urban planning projects that rehabilitates deteriorated residential environment, and it is closely associated with the quality of life of public. Accordingly, we hope that such projects are reasonable and take effective approach to those with urgent needs rather than to focus on profitability. Also, potential administrative and economical loss should be avoided by taking necessary planning measures in advance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.249-259
• /
• 2018

More than half of annual rainfall occurs in summer season in Korea due to its climate condition and geographical location. A frequency analysis is mostly adopted for designing hydraulic structure under the such concentrated rainfall condition. Among the various distributions, univariate Gumbel distribution has been routinely used for rainfall frequency analysis in Korea. However, the distributional changes in extreme rainfall have been globally observed including Korea. More specifically, the univariate Gumbel distribution based rainfall frequency analysis is often fail to describe multimodal behaviors which are mainly influenced by distinct climate conditions during the wet season. In this context, we purposed a Gumbel mixture distribution based rainfall frequency analysis with a Bayesian framework, and further the results were compared to that of the univariate. It was found that the proposed model showed better performance in describing underlying distributions, leading to the lower Bayesian information criterion (BIC) values. The mixed Gumbel distribution was more robust for describing the upper tail of the distribution which playes a crucial role in estimating more reliable estimates of design rainfall uncertainty occurred by peak of upper tail than single Gumbel distribution. Therefore, it can be concluded that the mixed Gumbel distribution is more compatible for extreme frequency analysis rainfall data with two or more peaks on its distribution.

• Journal of Distribution Science
• /
• v.13 no.7
• /
• pp.63-71
• /
• 2015

Purpose - The characteristics of the modern management environment in Korea clearly involve the limitations of knowledge management, globalization, changes in industrial structures, polarization of the economy, consumption, and education, and the demand for creative management. To achieve a continuous competitive advantage for individuals as well as organizations, Wisdom Management can be said to be a paradigm for the current environment. The Research is an alternative to environmental management in the early study of the need to conceptualize the theoretical approach to wisdom management. In other words, it presents a new management paradigm for a business environment of uncertainty and unpredictability. Furthermore, it aims to propose Wisdom Management as an alternative in the modern management environment as well as a topic of discourse. Its purpose is to provide basic knowledge to people who study and practice in this field to strengthen the competitiveness of individuals and companies. Research design, data, and methodology - This paper first provides six characteristics of the current management environment at home and abroad. It then attempts to emphasize the necessity of wisdom based on such characteristics by classifying wisdom according to recent management study research. This allows the derivation of definitions of wisdom management, suggesting its components and properties. Results - The six characteristics of the modern business environment are: 1) limits of knowledge, 2) intensifying globalized competition, 3) changes in industry structure - IoT (Internet of all Things) trend, 4) serious polarization and social unrest diffusion, 5) personal and organizational competitiveness creativity requirements, and 6) domestic special national and social situations. Therefore, accordingly, wisdom can be defined and classified as: wisdom that offers potential integration beyond knowledge, practicing and maintaining knowledge wisdom as an efficient strategy for an organization wisdom as a decision-making process that addresses ambivalence wisdom as the pursuit of common goods based on ethics; and, wisdom as creativity that involves intuition and insight. This paper attempts to define Wisdom Management in accordance with these definitions of wisdom. Wisdom Management is a management system that is awareof the current environment given in the multidimensional perspective, achieves the efficiency of the organization and the goals of common good through an uncertain decision-making process, based on the organization of individual and organizational knowledge, and the internal experiences and resources. Wisdom Management components include human beings, virtue, knowledge, creativity, and ambivalent thinking. Its properties include intentionality, self-destructiveness, creative and ethical reflexivity, complexity, insight, unpredictability, ambivalence, and wholeness. Conclusions - Since all organizations face the limitations of their environment, crises, and opportunities, applying wisdom in management to develop as Wisdom Management can be an inevitable alternative to the uncertainties of the management environment faced by modern society. The conceptualization of Wisdom Management forms a valuable context to further advance knowledge management theory into practice. It is also a cornerstone of strategic management and can provide insight into its potential for success and implementation.