• Proceedings of the Korean Environmental Health Society Conference
• /
• 2003.06a
• /
• pp.66-75
• /
• 2003

This paper reviewed available information/data compiled by various agencies, institutions, and experts, including the academe. The review concentrated on five of the most pressing problems such as air pollution, water pollution, land pollution related to the problem of solid wastes, toxic and hazardous chemical wastes and deforestation. Most of the data presented focused on Metro Manila. Past air monitoring data showed significant exceedances of national air quality guideline values especially for particulates and lead. Many of the country's rivers and lakes have deteriorated, some were declared biologically dead. The acute solid waste problem and the proliferation of toxic and hazardous chemicals have led to the enactment of legislation. Uncontrolled deforestation has taken its toll on the environment and people. Various actions were undertaken by the national administration with the cooperation of other sectors to address environmental problems. However, constraints to the enforcement of environmental laws and programs must be minimized to attain the desired level of environmental protection and management.

• Steel and Composite Structures
• /
• v.28 no.3
• /
• pp.363-380
• /
• 2018

This paper presented an integral design procedure for demountable bolted composite frames with semi-rigid joints. Moment-rotation relationships of beam-to-column joints were predicted with analytical models aiming to provide accurate and reliable analytical solutions. Among this, initial stiffness of beam-to-column joints was derived on the basis of Timoshenko's plate theory, and moment capacity was derived in accordance with Eurocodes. The predictions were validated with relevant test results prior to further applications. Frame analysis was conducted by using Abaqus software with material and geometrical nonlinearity considered. Variable lateral loads incorporating wind actions and earthquake actions in accordance with Australian Standards were adopted to evaluate the flexural behaviour of the composite frames. Strength and serviceability limit state criteria were utilized to verify configurations of designed models. A wide range of frames with the varied number of storeys and bays were thereafter programmed to ascertain bending moment envelopes under various load combinations. The analytical results suggest that the proposed approach is capable of predicting the moment-rotation performance of the semi-rigid joints reasonably well. Outcomes of the frame analysis indicate that the load combination with dead loads and live loads only leads to maximum sagging and hogging moment magnitudes in beams. As for lateral loads, wind actions are more crucial to dominate the design of the demountable composite frames than earthquake actions. No hogging moment reversal is expected in the composite beams given that the frames are designed properly. The proposed analysis procedure is demonstrated to be a simple and efficient method, which can be applied into engineering practice.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.485-492
• /
• 2020

Information on the energy consumption of buildings that can be obtained through conventional methods is limited. Therefore, this study aims to develop a model that can support decision making about building facility management through digital transformation technologies. Through the IoT sensor, the building's energy data and indoor air quality data are collected, and the monitored data is visualized through the ELK Stack and produced as a dashboard. In addition, the target building is photographed with a 360-degree camera and maps using a tool to create a 360-degree tour. Using such digital transformation technologies, users of buildings can obtain various information in real time without visiting buildings directly. This can lead to changes in actions or actions for building management, supporting facility management decisions, and consequently reducing building energy consumption.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.4
• /
• pp.137-142
• /
• 1999

Current semiconductor industry factories are relying on the end-of-pipe treatment technology for waste water treatment and thus they mostly suffer from severe industrial water shortage. As a result in order to solve those waste and industrial water problems, there requires to be changed to the Clean Technology, that is Pollution Prevention Technology. Through above strategic actions with the Clean Technology, we shall strength more powerful and logical environmental pollution prevention system than those in the past. By changing the end-of-pipe treatment technology for waste water treatment and thus they mostly suffer from severe industrial water problems, there requires to be changed to the Clean Technology, that is Pollution Prevention Technology. Through above strategic actions with the Clean Technology, we shall strength more powerful and logical environmental pollution prevention system than those in the past. By changing the end-of-pipe treatment technology with physical, chemical and biological treatment methods as a mixed stream basis for treating of semiconductor waste stream into clean technology with pollution prevention technology as a waste segregation basis, we can bet 20 to 30% investment reduction as compared with end-of-pipe treatment technology.The results for water quality analysis were as follows : 1. Water quality analysis of the before treatment : pH : 9~10.5, Conductivity : $300~7,000{\mu}s/cm$, TDS : more then $3,000mg/{\ell}$, COD : $200~250mg/{\ell}$, SS : $500~600mg/{\ell}$, n-H : $8.3mg/{\ell}$ 2. Water quality analysis of the after treatment : pH : 6.5~7.5, Conductivity : 0.059, TDS : $40{\mu}s/cm$, COD : $20mg/{\ell}$, SS : $5mg/{\ell}$ n-H : $0.6mg/{\ell}$

• Steel and Composite Structures
• /
• v.20 no.2
• /
• pp.379-397
• /
• 2016

Due to creep and shrinkage of the concrete core, concrete-filled steel tubular (CFST) arches continue to deform in the long-term under sustained loads. This paper presents analytical investigations of the effects of geometric nonlinearity on the long-term in-plane structural performance and stability of three-pinned CFST circular arches under a sustained uniform radial load. Non-linear long-term analysis is conducted and compared with its linear counterpart. It is found that the linear analysis predicts long-term increases of deformations of the CFST arches, but does not predict any long-term changes of the internal actions. However, non-linear analysis predicts not only more significant long-term increases of deformations, but also significant long-term increases of internal actions under the same sustained load. As a result, a three-pinned CFST arch satisfying the serviceability limit state predicted by the linear analysis may violate the serviceability requirement when its geometric nonlinearity is considered. It is also shown that the geometric nonlinearity greatly reduces the long-term in-plane stability of three-pinned CFST arches under the sustained load. A three-pinned CFST arch satisfying the stability limit state predicted by linear analysis in the long-term may lose its stability because of its geometric nonlinearity. Hence, non-linear analysis is needed for correctly predicting the long-term structural behaviour and stability of three-pinned CFST arches under the sustained load. The non-linear long-term behaviour and stability of three-pinned CFST arches are compared with those of two-pinned counterparts. The linear and non-linear analyses for the long-term behaviour and stability are validated by the finite element method.

• Hwankyungkyoyuk
• /
• v.11 no.2
• /
• pp.40-53
• /
• 1998

Since 1970', the international community has displayed a heightened consciousness concerning the Earth environment and Environmental Education has became to be as survival strategies for the environment and human life. For developing the model of instructional procedure for educating environmental behaviors in environmental education, this study analyzed the objectives, characteristics, contents, instructional methods and instructional procedures of case studies that were awarded the first prize of the Contest of the Case Study in Korea that were had charged by KFTA. The main results of this study were as follows :(1) the more objectives for environmental education were focused on “formulating values and attitudes for the environment”, some objectives for “skills” need to investigate or solve the environmental issues were found, and some objectives for “environmental behaviors”. (2) the more contents of environmental education were focused on “environmental pollutions” (3) the more instructional methods for environmental education used for “investigating or experiment” to solve the environmental issues or problems, some methods for “taking actions for the environment”. (4) the most of case studies were used the model of environmental instruction that were developed by KEDI in 1988. Conclusionally, This study suggested that you have to emphasis on level of responsible citizen behaviors to resolve the environmental issues or problems in the environmental instructional procedures.

• Fisheries and Aquatic Sciences
• /
• v.8 no.2
• /
• pp.83-89
• /
• 2005

Morphology, histology, and histochemical characteristics of the digestive tract of the guirine goby (Rhinogobius giurinus: Gobiidae), collected from the coast of Jeju Island, Korea, were investigated. The digestive tract of R. giurinus, which is a brackish water species, has a short (relative length of gut=0.42), simple, and narrow gut. The gastric glands are well developed in the stomach, but pyloric caeca are absent. The mucosal folds are regularly branched, and the muscularis extern a is thickest in the esophagus, which also contained the most mucus-secreting goblet cells (P<0.05). In R. giurinus, digestive function occurs in the anterior portion of the digestive tract, where mucus protects the tract from the actions of digestive enzymes and functions to activate digestion.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.11
• /
• pp.1773-1781
• /
• 2015

Environmental security is one of the major concerns for the safety of living organisms from a number of harmful pollutants in the atmosphere. Different initiatives, legislative actions, as well as scientific and social concerns have been discussed and adopted to control and regulate the threats of environmental pollution, but it still remains a worldwide challenge. Therefore, there is a need for developing certain sensitive, rapid, and selective techniques that can detect and screen the pollutants for effective bioremediation processes. In this perspective, isolated enzymes or biological systems producing enzymes, as whole cells or in immobilized state, can be used as a source for detection, quantification, and degradation or transformation of pollutants to non-polluting compounds to restore the ecological balance. Biosensors are ideal for the detection and measurement of environmental pollution in a reliable, specific, and sensitive way. In this review, the current status of different types of microbial biosensors and mechanisms of detection of various environmental toxicants are discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.108-113
• /
• 2001

Recently people have come to demand more pleasant environments as the quality and right of life have been improved. Along with industrial development, the tendency is causing a growing number of disputes concerning environmental damages. Of many kinds of environmental damages, noise and vibration pollution rising at construction fields are particularly the most common subjects of public grievance. Thus the government launched the Environmental Dispute Mediation Committee in 1991, purposing to utilize fully the promptness and expertise of administrative institutes and to resolve environmental damage disputes promptly and fairly by interfering in them actively. With the prompt and fair dispute mediations of the committee, people came to be able to get fair and prompt remedies for damages in their health and fortune by environmental pollution. Therefore, by analyzing dispute mediation cases on construction noise and vibration damages, we will suggest basic material on which efficient actions can be taken for public grievances happening in the future.

• Journal of Environmental Health Sciences
• /
• v.28 no.4
• /
• pp.1-5
• /
• 2002

Drosophila Kc cells are ecdysone-responsive : hormone treatment leads rapidly to increased synthesis of several ecdysone-inducible polypeptides (EIPs) and to commitment to eventual proloferative arrest. Later the treated cells undergo morphological transformation, cease to proliferate and to grow. These responses have proven useful as models for studying ecdysone action and environmental endocrine disrupting actions. In this study, we used 20-HE to check out the Kc cells properties to the ecdysone and this properties will be applied to the environmental chemicals to find out the endocrine disrupting action in ecosystem. The cell counts of cultures harvested after 3 days' growth in the presence of 20-hydroxyecdysone. In Kc cell cultures, there were statistically significant different from control cells at 20HE 10/sup 7/-10/sup 5/. The morphological effects of all the hormones were similar, differing only in the dose level at which they were initiated.