• KIEAE Journal
• /
• v.10 no.2
• /
• pp.3-8
• /
• 2010

Many countermeasures are presented to make excessive earth circumstance pollution better in the earth. A lot of researches are in progress to lessen $CO_2$ among the industries exhausting it. The industries manufacturing cement are making many countermeasures. Many concernments on ECO-friendly materials, rather than cement, are increased, and researches are in progress to develop them. Lime, material mostly used before Portland cement appeared, attracts the Occident as well as the Orient. In the Occident, lime mortar was used in common, for maintaining and repairing cultural properties, too. This study is aimed at offering basic materials for the modern use of lime, ECO-friendly material. This study measured the change of intensity and weight with lime, sand, and earth, basic materials of Samhoimool. As a result, at the beginning, hydrated lime displayed its density late, but as time was gone, density was promoted continuously. In addition, density was promoted, when it was given heat at the beginning. If heat-generation reaction of quicklime and water was used, density was promoted at the beginning, but liquidity showed a drop.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.370-373
• /
• 2006

Lastly, the problem of filling occurs in the process of concealed joint of adjacent components and was seen in joints between the structure and an electrical or mechanical device. Therefore, the dry processing which replaces wet joint was seen in joints between the structure and a door, ones between the structure and a finishing materials, ones between a gypsum board and electrical device, and ones between a water pipe and a tile finishing. And a process of separating the area of jointed parts in order to eliminate the problem of overlap was seen in joints between a door and a finishing material and ones between a gypsum board on the ceiling and a light. Lastly, an analysis of a process of exposing concealed parts indicated that the problem of filling could be applied to joints between the structure and an electrical or mechanical device and ones between a finishing material and a mechanical device. This study sought out methods to apply Environment Friendly Multi Housing Remodeling that allow easy remodeling as part of environment- preserving policies. It also contains basic data useful to implement long-life houses in the future by presenting a comprehensive design standard for them

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.249-254
• /
• 2008

The objective of this study is to interpret a environmental-friendly plan factors of Korean traditional settlement used of existing classification system. The existing classification system framework is six environmental ecological ideas as the adaptation to the adaptation to the availability of land, the eco-space in village, the system of house, the cycling of material and the reasonable energy system, the water resources, prevention of environment pollution. Additional research was undertaken to verify the findings. Through the interpretation, it has been found out that Gu-Rim tradition village has been developed to an environmental ecological rational setting and has the meaningful elements for environmental friendly housing estates.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.2
• /
• pp.296-306
• /
• 1999

This study reflects the aim of analyzing the fashion design connection with ecology. Ecology has been linked to human life through its changing relations with environment. In order to recover eco-system ecology-nature oriented methodology and technology oriented approach will suffice. On the modern design field Green design Recycling and Green marketing resulted in increasing rates of environment-friendly production and an effort to deliver environment-friendly corporate image. Based on above research ecological image on fashion design during the year 1990 to 1995 represents the following conclusion. In the fashion design field natural image primitive image nature -harmonious image material-recyling image culture-recycling image are proposed. In the technology field clean image and high-tech image are proposed. In the marketing field happy image harmonious image serious image and realistic image are proposed.

• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.128-135
• /
• 2010

In this paper, traditional residential architecture in South Korea appear to approach environmental regulation as part of ecological architecture of regional climate controlled environment, according to the characteristics and spatial arrangement, and material to the environment was described as a controlled manner. The scope of this study was not large scale housing construction from traditional chusagotaek, yunjeunggotaek, yangjindang, dokrakdang target was the case. Focusing on examples extracted from Korea first eco-friendly characteristics of traditional residential architecture is an extension of nature to explore space and yard space, and South Korea by way of environmental control that appears in traditional architecture, waterproof, moisture, solar radiation, sunlight, ventilation and air Attributes such as environmental regulation and environmental regulation of space, place and manner of materials were described. Korea's research through more traditional residential architecture of the environmental control and a wide range of environmentally friendly eco-construction was that appeared natural to use energy efficiently, it had been available. Later appeared on the Korea traditional architecture through research on environmental control of environmentally friendly ways to navigate and take advantage of the elements, through continuous research and eco-friendly construction to realize the traditional South Korea could provide a prototype of the modern, I thought I'd had.

• Journal of the Korean Institute of Rural Architecture
• /
• v.20 no.4
• /
• pp.77-84
• /
• 2018

The purpose of this study is to certify the eco-friendly elements of traditional Hanok based on the G-SEED 2016 Criteria. For this study, estimating the eco-friendly elements of the two traditional Hanok - Myeong Jae's old house and General Lee Sam's old house - based on the G-SEED 2016 Criteria. The results were as follows: Each of the two traditional Hanok can get the sufficient points for grading at G-SEED 2016, but the two required criteria are not be able to get the points; energy performance such as heat storage of traditional mud wall and water saving equipments. On the other hand using eco-friendly materials in traditional Hanok are satisfied with the Material category. Also using rainwater and underwater through garden and pond in traditional Hanok are satisfied with the Ecological environment category. But lots of the other eco-friendly elements of traditional Hanok can not be estimated by G-SEED 2016 Criteria. Modern Hanok will be able to obtain G-SEED 2016 certification when using the valid eco-friendly elements of traditional Hanok and applies new technologies such as water saving equipments.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.2
• /
• pp.264-270
• /
• 2011

This paper focuses on possibility to design and fabrication new combination of bullet core to substitute current toxic material of heavy metal such as lead by environment-friendly ones. The core is designed as dual structure to manipulate the core center of gravity easily by combining materials, which of basis is tungsten of low cost and easily acquired. Those combinations are W-M series such as W-Cu, W-Sn, W-Cu-Sn, and W-Cu-Ni to target the density of lead, $11.34g/cm^3$ through powder-metallurgy. Out of four, combination of W-Cu-Ni shows the highest compression density of 96% and is confirmed as the most suitable substitution for lead due to the excellent property of matter and sintering. All combination samples is simulated on the PRODAS software for designing and structure analysis by adjusting the center of gravity of dual core samples forward and backward. The simulations confirm the similarity of current bullet core with respect to properties of mass, aero dynamics, and flying stability.

• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.664-669
• /
• 2019

In this paper, a water-based green polymer mud is synthesized by simple compounding method. Effects of different kinds of tackifiers, their molecular weight on the viscosity of polymer mud and the effects of different fluid loss additives on mud fluid loss are studied. The results show that when polystyrene and anionic polyacrylamide with molecular weight of 8 ~ 10 million are used as the main thickening ingredient, polymer mud with high viscosity and high stability can be obtained. When the prepared polymer mud is formulated as NPAM: PEO: Hydroxypropyl cellulose(HPC) : Water = 42:10:10:100000 (unit: kg), the viscosity can reach 20.6 s, the filtration loss in 7.5 min is 24 mL, and the sand content is only 0.1 %. Compared with traditional bentonite mud, the green environment-friendly polymer mud has the advantages of small amount of waste, low environmental pollution, and low pulping cost, and can meet the construction needs for most topography and geomorphology drilling engineering.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.533-538
• /
• 2004

Rolling Stock life cycle can not provide weakness of environment due to the absence DB on about environment information for contaminant, expense analysis on each step which consists of raw material-design-manufacture-running-waste step. In order to estimate environmental impacts on LCA for rolling stock system, scientifically and internationally fair standards of assessment method for pursuing environmental friendly in environment regulation policy, application of LCA system is proposed and introduced in the present paper.

• Journal of the Korea Furniture Society
• /
• v.22 no.3
• /
• pp.230-238
• /
• 2011

Consumers' expenditure is getting larger on children due to their parents' compensation for increase of double-income family life and decrease of birth rate caused by high economic growth. Increase of demand on children items in the market leads the necessity of development of furniture for children. This study is aimed to design children chairs that meet the environment for children. In this study, the age of children is defined to be 5~7 years old. In order to investigate what causes environment change, this study covers roughly change of environment, change of learning program and use of environment-friendly material. In such scope, we drew out the factors that the chairs for children shall be equipped with. Case studies were done through such drawn factors. The scope of the furniture for children is limited to the chairs for children among the ones made in either Korea or overseas. As a result, we could draw out such keyword of the furniture as storage, mobility, environment-friendly, object style image, preferred color, functionality and safety, based on which we could plan the design and make the final result through high frequency round molding manufacturing process.