• Advances in concrete construction
• /
• v.13 no.6
• /
• pp.433-450
• /
• 2022

The conventional disposal methods of waste tires are harmful to the environment. Moreover, the recycling/reuse of waste tires in domestic and industrial applications is limited due to parent product's quality control and environmental concerns. Additionally, the recycling industry often prefers powdered rubber particles (<0.60 mm). However, the processing of waste tires yields both powdered and coarser (>0.60 mm) size fractions. Reprocessing of coarser rubber requires higher energy increasing the product cost. Therefore, the waste tire rubber (WTR) less favored by the recycling industry is encouraged for use in construction products as one of the environment-friendly disposal methods. In this study, WTR fiber >0.60 mm size fraction is collected from the industry and sorted into 0.60-1.18, 1.18-2.36-, and 2.36-4.75-mm sizes. The effects of different fiber size fractions are studied by incorporating it as fine aggregates at 10%, 20%, and 30% in the self-compacting rubberized concrete (SCRC). The experimental investigations are carried out by performing fresh and hardened state tests. As the fresh state tests, the slump-flow, T500, V-funnel, and L-box are performed. As the hardened state tests, the scanning electron microscope, compressive strength, flexural strength and split tensile strength tests are conducted. Also, the water absorption, porosity, and ultrasonic pulse velocity tests are performed to measure durability. Furthermore, SCRC's energy absorption capacity is evaluated using the falling weight impact test. The statistical significance of content and size fraction of WTR fiber on SCRC is evaluated using the analysis of variance (ANOVA). As the general conclusion, implementation of various size fraction WTR fiber as fine aggregate showed potential for producing concrete for construction applications. Thus, use of WTR fiber in concrete is suggested for safe, and feasible waste tire disposal.

• Journal of Plant Biotechnology
• /
• v.45 no.3
• /
• pp.190-195
• /
• 2018

Sweetpotato [Ipomoea batatas (L.) Lam] represents an attractive starch crop that can be used to facilitate solving global food and environmental problems in the $21^{st}$ century. It can be used as industrial bioreactors to produce various high value-added materials, including bio-ethanol, functional feed, antioxidants, as well as food resources. The non-profit Center for Science in the Public Interest (CSPI) announced sweetpotato as one of the ten 'super foods' for better health, since it contains high levels of low molecular weight antioxidants such as vitamin-C, vitamin-E and carotenoids, as well as dietary fiber and potassium. The United States Department of Agriculture (USDA) also reported that sweetpotato is the best bioenergy crop among starch crops on marginal lands, that does not affect food security. The Food and Agriculture Organization (FAO) estimated that world population in 2050 will be 9.7 billion, and require approximately 1.7 times more food than today. In this respect, sweetpotato will be a solution to solving problems such as food, energy, health, and environment facing the globe in the $21^{st}$ century. In this paper, the current status of resources, and cultivation of sweetpotato in the world was first described. Development of a new northern route of the sweetpotato and its prior tasks of large scale cultivation of sweetpotato, were also described in terms of global food security, and production of high-value added biomaterials.

• Korean Journal of Organic Agriculture
• /
• v.25 no.2
• /
• pp.445-460
• /
• 2017

This study was carried out for three years from 2013 to 2015 to investigate the actual condition of pest control of domestic persimmon organically cultivated farmers, to select environment - friendly pest control materials for major pests, and to conduct field test of established control system. The main cultivated cultivar of the reader farmer of organic cultivation was "Buyou" and sprayed organic agricultural material 9~17 times per year for pest control. The most harmful pests were anthracnose, bugs, persimmon fruit worm, and scales, etc. The control materials used were organic lime sulfur mixture, red clay sulfur, emulsifier, bordeaux solution, and self-made plant extracts using garlic, ginkgo nut and pine tree. The effective materials for controlling anthrax were lime sulfur mixture and red clay sulfur. Garlic oil + citronella emulsion, shrubby sophora seed extract + tea extract was effective to control Riptortus clavatus and Euproctis subflava. When installed 60 ea per 10a of mating disruption trap in a sweet orchard, the fruit setting rate was improved by 30%. The results of field test of control system to control 10 times a year in organically grown persimmons were able to harvest fruit of 70.7%. However, since any kinds of pesticides can not be sprayed during the harvest season in September and October, the damaged by bugs did not decreased, and further research is needed.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.105-112
• /
• 2009

The greenhouse whitefly, Trialeurodes vaporariorum (Westwood) and the sweet potato whitefly, Bemisia tabaci (Gennadius) are serious insect pests that have a wide host range including cucumber, tomato, and pepper. In this study, we tested larvicidal efficacy of several on-the-market environment-friendly agricultural materials (EFAM) to select the effective products after the target pests were stabilized in indoor rearing condition. The developmental periods of two whiteflies are as follows: in the case of T. vaporariorum, egg duration is 9.6 days and nymph is 18.9 days, and in the case of B. tabaci, egg duration is 7.4 days and nymph is 15.2 days under $25^{\circ}C$ with relative humidity (RH) of $60{\pm}5%$ and a photoperiod of 16 L:8D. The total period of T. vaporariorum was 5 days longer than B. tabaci. Among 22 EFAMs six products showed more than 60% of insecticide efficacy against T. vaporariorum BTV B, BTV D, BTV G, BTV L, BTV M, and BTV S. On the other hand, seven EFAM products showed over 60% of insecticide efficacy against B. tabaci BTV D, BTV G, BTV K, BTV L, BTV M, BTV N, and BTV U. In the case of Spodptera litura previously, 16 EFAMs were tested against $2^{nd}$ instar S. litura, and six EFAMs were found to have more than 90% efficacy. Test of these six EFAMs against entire larval stages were performed in this study. Although some of these products showed still more than 90% of insecticidal efficacy against up to $3^{rd}$ instar larvae, the efficacy of these EFAMs sharply decreased as ages increase, resulting in less than 60% of efficacy of the products at most. This result indicates the difficulty to control S. litura with the on-the-market EFAMs alone under economic injury level. Collectively, it is required to find more EFAMs, and find alternative method, and combined way of controlling to control those insect pests tested in this study.

• Korean Journal of Agricultural Science
• /
• v.31 no.2
• /
• pp.105-114
• /
• 2004

This study was performed to examine the physical and mechanical properties of eco-concrete using soil, natural coarse aggregate, soil compound and polypropylen fiber. The mass loss ratio was decreased with increasing the content of coarse aggregate and soil compound. The compressive strength, flexural strength, ultrasonic pulse velocity and dynamic modulus of elasticity were increased with increasing the content of coarse aggregate, soil compound and polypropylene fiber. The compressive and flexural strengths were showed in 8.07 MPa and 2.641 MPa at the curing age 28 days, respectively. The coefficient of permeability was decreased with increasing the content of coarse aggregate and soil compound, but it was increased with increasing the content of polypropylene fiber. The lowest coefficent of permeability was showed in $5.066{\times}10^{-9}cm/s$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.2
• /
• pp.248-255
• /
• 2011

For the environmental friendly soil management on the cultivation of crops in the greenhouse, organic materials, such as the by product-fertilizer derived from livestock manure, rice straw, mushroom media, rice hulls, wood sawdust, and cocopeat, were used as carbon sources adjusting the ratio of carbon to nitrogen to 10, 20, and 30 based on the inorganic soil N. In each C/N ratio of greenhouse soil, watermelon was cultivated in the greenhouse as crop for experiment for the spring and summer of the year and the experimental results were summarized as follows. The concentration of T-C in the organic materials applied were between $289{\sim}429g\;kg^{-1}$, In the C/N ratio of 10, using watermelon as the crop cultivated during the second half of the year in the greenhouse soil, the $NO_3$-N and EC were reduced by 21 to 37%, and 26 to 33%, respectively, except the by product-fertilizer from livestock manure, compared to the soil $NO_3$-N and EC used in the experiment. After the watermelon was cultivated in soils that C/N ratios were controlled as 10, 20, and 30 with wood sawdust adding as carbon sources in the three soils with the different EC values, EC values of the soils were reduced by 33, 42, and 39%, respectively, compared to the soil EC used in the experiment. The weight of watermelon was 10.1-13.4 kg per one unit, and, of the three soils with different EC values. In the soils with three different EC values controlled at C/N ratio of 20, the weight of watermelon was good. The degree of sugar of watermelon were 11.8 to 12.3 Brix, which means that the difference between the treatments was not significant. In conclusion, the C/N ratio of 20 controlled by the proper supply of organic materials according to the representative EC values shown in the greenhouse soils was optimal condition enough to maintain the soil management for the organic culture with the proper nutrient cycling.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.4
• /
• pp.393-401
• /
• 2018

Natural fibers derived from lignocellulosic materials are considered to be more environment-friendly than petroleum-based synthetic fibers. Several natural fibers, such as seedpod fibers, have a potential for development, including kapok and balsa fibers. The characteristics of both fibers were evaluated to determine their suitability for specific valuable applications. The purpose of this study was to analyze some important fundamental properties of kapok and balsa fibers, including their dimensions, morphology, chemical components, and wettability. The results showed that the average fiber lengths for kapok and balsa were 1.63 and 1.30 cm, respectively. Kapok and balsa fibers had thin cell walls and large lumens filled with air. The kapok fiber was composed of 38.09% ${\alpha}-cellulose$, 14.09% lignin, and 2.34% wax content, whereas the balsa fiber was composed 44.62% ${\alpha}-cellulose$, 16.60% lignin, and 2.29% wax content. The characteristics of kapok and balsa fibers were examined by X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry analyses. The contact angle of the distilled water on kapok and balsa fibers was more than $90^{\circ}$, indicating that both fibers are hydrophobic with low wettability properties because of to the presence of wax on the fiber surface.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.22-40
• /
• 2015

Cellulose fibers is one of the most abundant in nature. It has many distinctive features: abundant in nature, biodegradable, non-toxic, eco-friendly, sustainable, easy to fabricate, hydrophilic, and cost-effective. Cellulose fibers, known as pulp, is produced from cellulose-containing materials by the pulping process. As the raw material, wood has been most commonly used while recycled pulp has been also used to some degree. Thus, pulp usually refers to wood pulp. Generally, the pulp and paper industry is regarded as the commodity market where the cost should be much more important than the quality. It also belongs to a mature market where the growth is slow, or even in decline. Accordingly, technological development has been rather stagnant for the industry. Recently, however, the pulp and paper industry has faced very serious challenges. First, due to digital technology, there has been a steady decline in the need for pulp and paper products. The digital industry has continuously replaced printed products such as books, newspapers, and magazines. Second, there has been a trend initiated by developed countries to limit the use of wood as the raw material for the sake of environmental protection. This forces the industry to find a more efficient use of wood pulp as well as finding alternative, non-wood sources. Third, as an individual becomes wealthier and more conscious of health-care, the quality of a product becomes more important than the cost. Thus, a paradigm shift is needed from the cost-conscientious to the quality conscientious. The objective of this article is to review the technologies aimed at engineering cellulose fibers for producing high-value added paper products.

• Korean Journal of Organic Agriculture
• /
• v.15 no.4
• /
• pp.437-452
• /
• 2007

From the experiments on the effect of chitosan and wood vinegar, which are environment-friendly materials, on the growth of eggplant and leaf lettuce, the following results were obtained. 1. The effect of chitosan and wood vinegar treatment on the growth of eggplant 1) There was no difference in soil component elements before and after treatment with chitosan and wood vinegar. The total number of microorganisms tended to increase after treatment with chitosan and wood vinegar, while the number of bacteria increased among microorganisms. However, there was no consistent tendency in the number of Acinomycetes, fungi, and trichodema between treatments. 2) The growth and the yield of eggplant increased compared with the control plot in both the chitosan-treated plot and the wood vinegar-treated plot. However, there was no significant difference between the treatments. The yield of eggplant per 10a increased in chitosan- and wood vinegar-treated plots compared with the controlled plot. There was no significant difference in treatments, however, the plot treated with 800 times-diluted solution showed a higher growth. 2. The effect of chitosan and wood vinegar treatment on the growth of leaf lettuce 1) There was no difference in soil component elements before and after treatment with chitosan and wood vinegar. The number of bacteria increased among microorganisms. However, there was no consistent tendency in the number of Acinomycetes, fungi, and trichodema between treatments. 2) The growth of leaf lettuce in both chitosan-treated plot and wood vinegar-treated plot increased compared with the control plot, however, there was no significant difference between the treatments. On the whole, the plot treated with greater concentration showed a higher growth.

• Korean Journal of Organic Agriculture
• /
• v.25 no.2
• /
• pp.295-310
• /
• 2017

This study investigated the growth of five phytopathogenic fungi including Colletotrichum gloeosporioides, Diaporthe citri, Phytophthora capsici and others according to different concentrations of water extract in order to provide reference data for developing environment-friendly agricultural materials using five native Fagaceae species including Quercus acuta, Quercus salicina, Quercus glauca, Quercus gilva and Castanopsis cuspidata var. sieboldii. As the concentration of aqueous extracts of Fagaceae increased according to donor plants, the mycelial growth of phytopathogens showed a decreasing tendency. Differences were found in the degree of inhibition according to types of donor plants and pathogenic fungi. Diaporthe citri, Phytophthora capsici, Pythium graminicola on the water extract of Castanopsis cuspidata var. sieboldii inhibited mycelial growth by 84% in 25% of the treatment group and by 87% in more than half of the treatment group. The water extract of Quercus acuta was found to have no inhibitory effect against the mycelial growth of Diaporthe citri. The aqueous extracts of Quercus salicina, Quercus glauca and Quercus gilva insignificantly inhibited mycelial growth by approximately 15%. The total phenolic content of receptor plants exhibiting antifungal activity was highest in Castanopsis cuspidata var. sieboldii with a content of 22.32 mg/g phenols, followed by Quercus salicina with 8.32 mg/g, Quercus glauca with 6.83 mg/g, Quercus gilva with 5.95 mg/g, and Quercus acuta with 5.24 mg/g. The aqueous extracts of Castanopsis cuspidata var. sieboldii among the five Five Fagaceae Plants of were the most effective antifungal activity.