• Journal of the Korean Geotechnical Society
• /
• v.34 no.11
• /
• pp.93-105
• /
• 2018

Precise investigation and interpretation of the ground subsidence risk factors needed to predict and evaluate the settlement problems of the surrounding ground due to the ground excavation. There are various geophysical exploration methods to investigate the ground subsidence risk factors. However, there are factors that influence the characteristics of the underground medium in these geophysical methods, and the actual soil contains complex factors affecting geophysical exploration. Therefore, it is necessary to analyze the effects on the geophysical methods based on the understanding of the geotechnical properties of soil. In this study, a test bed was constructed to consider various complicated factors in the complex ground and the ground behavior was analyzed by numerical analysis. In addition, we analyzed the limitations on investigating the ground subsidence risk factors through ground penetration radar (GPR) survey. As a result, ground subsidence of Open-cut Type Excavation is caused by various factors. Especially, in the case of soft ground condition, it was found that it was greatly influenced by the flow change of groundwater level. At the center frequency of GPR of 250 MHz, the attenuation of the electromagnetic wave is severely attenuated in the clay with high electrical conductivity, making it difficult to penetrate deeply into the ground (4 m below the surface). As the electromagnetic waves pass through the groundwater level below the groundwater, the attenuation of the electromagnetic waves becomes severe.

• Journal of Life Science
• /
• v.28 no.12
• /
• pp.1536-1544
• /
• 2018

Depression is a common, serious, and recurring mental disorder. The pathogenesis of depression involves many factors such as environmental factor, genetic factor and alteration of structure and function in neurobiological systems. Increasing evidence supports that epigenetic alteration may be associated with depression. The epigenetics is explained as the mechanisms by which environmental factor causes changes in chromatin structure and alters gene expression without changing DNA base sequence. DNA methylation and histone modification involving histone acetylation and methylation are the main epigenetic mechanisms. Animal studies have shown that stressful environment such as early life stress can leave persistent epigenetic marks in the genome, which alter gene expression and influence neural and behavioral function through adulthood. A potentially important gene in depression is brain-derived neurotrophic factor (BDNF). BDNF plays a central role in depression and antidepressant action. In studies of the rodent, exposure to stress at prenatal, postnatal, and adult stages alters BDNF expression through histone modification and DNA methylation of the BDNF gene which results in anxiety and depressive-like behavior. This review discusses recent advances in the study of the epigenetic mechanisms that contribute to depression, particularly histone modification and DNA methylation of the BDNF gene, that may help in the development of new targets for depression treatment.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.189-199
• /
• 2019

In this study, behaviors of fire smoke in the operation of disaster prevention facilities (smoke damper, jet fan) in a tunnel-type structure (soundproof tunnel) were investigated numerically and results of the investigation were compared and analyzed. Through the simulation and analysis, it was found that there was a significant change in the patterns of fire smoke between the opening of the ceiling of a fire vehicle and the closing, and it was shown that the critical temperatures of PC and PMMA, main materials of a soundproof tunnel were not exceeded. In addition, the simulation of installation intervals of smoke dampers showed that the maximum temperature of a soundproof tunnel without smoke dampers was $552^{\circ}C$ while it reached $405^{\circ}C$ when smoke dampers were installed at the installation interval of 50 m. The simulation of the operation of a jet fan showed that the maximum temperature of a soundproof tunnel without a jet fan was $549^{\circ}C$ while it reached only $86^{\circ}C$ when a jet fan was operating. Therefore, it is highly expected that they could create a favorable environment for evacuation and protection of soundproofing materials, and it would be necessary to promote basic studies on tunnels serving various functions and purposes.

• Journal of Music and Human Behavior
• /
• v.16 no.1
• /
• pp.89-117
• /
• 2019

The purpose of this study was to explore and better understand special education music teachers' perceptions of their music curriculum. For this purpose, we conducted a focus group interview with seven special education music teachers. During the interview, four major themes and 14 sub-themes were identified. The main themes were the following: (a) types of applied activities and the goals of music classes (e.g., activities to be applied in various ways depending on the characteristics of the disability and intended outcome), (b) difficulty in implementing the music curriculum (e.g., lack of fit between textbook and students' chronological ages, lack of time and focus, self-evaluation of performance as a music teacher, (c) therapeutic experiences during music classes (e.g., expectation for positive effects through music therapy, joy of witnessing changes in students, and sense of togetherness), and (d) obstacles to the therapeutic approach of music classes and need for support (e.g., lack of professional knowledge regarding therapeutic approaches and problems with administrators and school environment). Based on these results, problems in implementing the music therapy approach as part of the music curriculum in special education schools are discussed and practical solutions for educators are offered.

• Advances in nano research
• /
• v.10 no.2
• /
• pp.115-128
• /
• 2021

In this article, free vibration behavior of electro-magneto-thermo sandwich Timoshenko beam made of porous core and Graphene Platelet Reinforced Composite (GPLRC) in a thermal environment is investigated. The governing equations of motion are derived by using the modified strain gradient theory for micro structures and Hamilton's principle. The magneto electro are under linear function along the thickness that contains magnetic and electric constant potentials and a cosine function. The effects of material length scale parameters, temperature change, various distributions of porous, different distributions of graphene platelets and thickness ratio on the natural frequency of Timoshenko beam are analyzed. The results show that an increase in aspect ratio, the temperature change, and the thickness of GPL leads to reduce the natural frequency; while vice versa for porous coefficient, volume fractions and length of GPL. Moreover, the effect of different size-dependent theories such as CT, MCST and MSGT on the natural frequency is investigated. It reveals that MSGT and CT have most and lowest values of natural frequency, respectively, because MSGT leads to increase the stiffness of micro Timoshenko sandwich beam by considering three material length scale parameters. It is seen that by increasing porosity coefficient, the natural frequency increases because both stiffness and mass matrices decreases, but the effect of reduction of mass matrix is more than stiffness matrix. Considering the piezo magneto-electric layers lead to enhance the stiffness of a micro beam, thus the natural frequency increases. It can be seen that with increasing of the value of WGPL, the stiffness of microbeam increases. As a result, the value of natural frequency enhances. It is shown that in hc/h = 0.7, the natural frequency for WGPL = 0.05 is 8% and 14% less than its for WGPL = 0.06 and WGPL = 0.07, respectively. The results show that with an increment in the length and width of GPLs, the natural frequency increases because the stiffness of micro structures enhances and vice versa for thickness of GPLs. It can be seen that the natural frequency for aGPL = 25 ㎛ and hc/h = 0.6 is 0.3% and 1% more than the one for aGPL = 5 ㎛ and aGPL = 1 ㎛, respectively.

• Journal of Internet Computing and Services
• /
• v.22 no.3
• /
• pp.75-83
• /
• 2021

With the development of the IT industry and the increase of cultural activities, the demand for works increases, and they can be used easily and conveniently in an online environment. Accordingly, copyright infringement is seriously occurring due to the ease of copying and distribution of works. Some special types of Online Service Providers (OSP) use filtering-based technology to protect copyrights, but they can easily bypass them, and there are limits to blocking all illegal works, making it increasingly difficult to protect copyrights. Recently, most of the distributors of illegal works are a certain minority, and profits are obtained by distributing illegal works through many OSP and majority ID. In this paper, we propose a profiling technique for heavy uploader, which is a major analysis target based on illegal works. Creates a feature containing information on overall illegal works and identifies major heavy uploader. Among these, clustering technology is used to identify heavy uploader that are presumed to be the same person. In addition, heavy uploaders with high priority can be analyzed through illegal work Distributor tracking and behavior analysis. In the future, it is expected that copyright damage will be minimized by identifying and blocking heavy uploader that distribute a large amount of illegal works.

• Journal of agricultural medicine and community health
• /
• v.47 no.1
• /
• pp.14-26
• /
• 2022

Objectives: Handwashing is one of the most effective methods to prevent the spread of infectious diseases. This study assessed the related factors and reasons for not practicing handwashing at school among adolescents. Methods: We analyzed data collected from 57,303 adolescents who participated in the 15th Korea Youth Risk Behavior Survey 2019. Results: The proportions of not washing hands "before meals at school" and "after using the toilet at school" were 15.9% and 4.4%, respectively. The adjusted odds ratio for not washing hands before meals at school was significantly higher in girls (Odds Ratio [OR]=1.52, 95% Confidence Intervals [CI]=1.42-1.63), metropolitan city (OR=1.32, 95% CI=1.11-1.56), city (OR=1.29, 95% CI=1.08-1.54), higher grade, higher academic performance, lower economic status, not handwashing at home (OR=14.36, 95% CI=13.37-15.42), and without annual personal hygiene education (OR=1.41, 95% CI=1.33-1.49). Reasons for not washing hands at school among adolescents who do not wash their hands before meals at school included 'it is bothersome (52.3%)', 'there is no soap or hand sanitizer (13.8%)', and 'I do not feel the need (9.5%)'. Conclusions: Improving handwashing before meals at school among adolescents requires raising awareness of the importance of handwashing before meals and establishing a suitable environment and handwashing-encouraging culture.

• The Journal of the Korea Contents Association
• /
• v.21 no.11
• /
• pp.333-349
• /
• 2021

As information is recognized as an important asset of an organization, organizations are increasing their resource input for knowledge management. In particular, the enterprise content management system(ECMS) is a solution for organization-oriented content management, and it has high utility by helping to achieve business performance through systematic utilization of content and improve the level of internal information security. The purpose of this study is to suggest a plan to improve the intention to use organizational employee's ECMS and to suggest the effect of the relationships between information system quality characteristics and work environment characteristics on intention to use. In this study, a research hypothesis was presented based on previous studies, a questionnaire was conducted on workers of organizations that adopted an ECMS, and the hypothesis was verified by applying structural equation modeling. As a result of the analysis, information and service quality of the ECMS and task interdependence increased the intention to use, but task conflict decreased the intention to use. In addition, task interdependence and task conflict moderated the positive relationship between the quality factors of the ECMS and the intention to use it. This study has implications in terms of suggesting the direction of the organization's behavior through factors that increase the use of ECMS.

• Korean small business review
• /
• v.42 no.4
• /
• pp.251-283
• /
• 2020

The purpose of this study is to provide assistance to the establishment of related policies to improve the level of acceptance and use of smart factories for SMEs in Korea. To this end, the Unified Technology Acceptance Model (UTAUT) was extended to select additional factors that could affect the intention to accept technology, and to demonstrate this. To achieve the research objective, a questionnaire composed of 7-point Likert scales was prepared, and a survey was conducted for manufacturing-related companies. A total of 136 questionnaires were used for statistical processing. As a result of the hypothesis test, performance expectation and social influence had a positive (+) positive effect on voluntary use, but effort expectation and promotion conditions did not have a significant effect. As an extension factor, the network effect and organizational characteristics had a positive (+) effect, and the innovation resistance had a negative effect (-), but the perceived risk had no significant effect. When the size of the company is large, the perceived risk and innovation resistance are low, and the level of influencing factors for veterinary intentions, veterinary intentions, and veterinary behaviors are excluded. Through this study, factors that could have a positive and negative effect on the adoption (reduction) of smart factory-related technologies were identified and factors to be improved and factors to be reduced were suggested. As a result, this study suggests that smart factory-related technologies should be accepted.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.553-564
• /
• 2022

Concrete is a representative composite material that shows excellent performance in the construction field. However, it is a brittle and nonhomogeneous material and exhibits weak behavior against bending and tensile forces. To compensate for such weakens, fiber reinforcement has been utilized, and steel fiber has been recognized as one of the best material for such purpose. However, steel fiber can seriously affect the durability of concrete exposed to the marine environment due to the corrosion caused by chlorine ions. This study intended to evaluate the mechanical performance of steel fiber reinforce concrete during and after repeated wet/dry cycles in salt solution. According to the experimental results, there was no reduction in the relative dynamic modulus of concrete during the repeated wet/dry cycles in salt solution for 37 weeks. Flexural strength was not decreased after completion of repeated wet/dry cycles in salt solution. There was no sign of corrosion in steel fibers after visual observation of fractured surface. However, the flexural toughness was decreased, and this is because about half of the concrete specimen showed failure before reaching the maximum displacement of 3 mm. Although repeated wet/dry cycles in salt solution did not cause cracks in concrete through corrosion of steel fibers, specific attention is required because it can reduce flexural toughness of steel fiber reinforced concrete.