• Korean Journal of Environment and Ecology
• /
• v.25 no.1
• /
• pp.17-30
• /
• 2011

This study has analyzed the vegetation composition in the areas using different slope revetment techniques of riverbanks, in a way to improve the vegetation induction in the future considering the ecological aspects of the induction in Garaeyoul Village, Gangdong-gu, Seoul. The result of the vegetation distribution in each different slope revetment technique was analyzed, that the naturalized herb was dominant in the pole block accounting for 70.7%, while native herb was dominant in the lawn block occupying 48.5% and in the crib block occupying 55.7%. The vegetation coverage measured by different slope revetment techniques was highest in the crib block(average 97.5%), followed by the lawn block(average 95.3%) and pole block(average 27.9%). The vegetation base area was the most wide in the crib block and the most narrowest in the pole block. The result of community analysis in areas using different slope revetment techniques, dry herbs and vine herbs were dominated and the coverage was very poor in the pole block. In the lawn block, the barb was fragmented into narrow areas due to the blocks, which prevented the creation of large-scale plant communities. In the crib block, Miscanthus sacchariflorus, Fescue arundinacea and Aster pilosus, which also consisted of large-scale communities. Average dry weight was also measured by each slope revetment technique. The weight was heaviest in the crib block with $187.63g/m^2$, followed by the lawn block($137.65g/m^2$) and pole block($6.75g/m^2$). The soil moisture contents in the crib block and lawn block was 16.3% and 15.2%, respectively, while that of the pole block was 4.7%, which revealed the highly dry condition of the pole block soil. The analysis result of soil chemical property showed that there was little difference in soil texture, soile acidity(pH), and exchangeable ion content, however, the soil organic matter(OM) content and available $P_2O_5$ were highest in the pole block. In the future, in order to induce more vegetation into river banks and walls, a proper construction method should be applied so that the vegetation area can be expanded as much as possible, considering the safety of the banks.

• Applied Biological Chemistry
• /
• v.9
• /
• pp.97-104
• /
• 1968

A survey of the free amino acids and free sugars in the juice of fourteen citrus varieties was made by means of paper chromatography and the pectin content in the rind was detected The results of the survey are summarized as follows. 1) Sixteen aminoacids detecteu in fourteen varieties under the condition of this study were distributed with. different frequency as follow. Proline, gamma-amino-butyric acid, alanine, valine, serine, glutamic acid, aspartic acid (in 14 varieties), lysine(12), leucine threonine(11), isoleucine(10), arginine(9), glycine(6) ${\beta}-alanine$(4) asparagine(3) unknown(2). 2) Proline, gamma-amino-butyric acid were mostly abundant in all varieties and alanine was next in the amount. 3) The varieties in the decreasing order of number of amino acids container were C. grandis madow C. leiocarpa (14 acids), C. sulcata, C. hassaku. native citron, Fortunella japonica(13) C. grandis heiko, C. Tamurana iyo, C. nobilis(12) C. reticulata C. junos(11) C. natsudaidai(10) C. miyakawa unshiu, C. ohali unshiu(9). 4) The varieties which appear to contain all essential amino acids(6 acids)detected were C. grandis madow C. grandis heiko, C. sulcata, C. Tamurana iyo, C. hassaku and native citron, and C. natsudaidai, C. unshiu were the least (1-3 acids). 5) Glucose fructose, sucrose and maltose were detected in all varieties. 6) The pectin content in the rind ranged from 8.64% F.W.(C. junos) up to 17.0% for C, grandis madow and the mean was $11.63{\pm}2.69%$.

• Journal of Bio-Environment Control
• /
• v.13 no.4
• /
• pp.226-232
• /
• 2004

This experiment was conducted to investigate the effect of night and daytime temperatures on growth and yield of paprika 'Fiesta' and 'Jubilee' under soil culture experiment in the vinyl houses during the 2003 and 2004 season. Total fruit yield was greater in 'Fiesta' than 'Jubilee' Marketable yield was not different between two cultivars, due to lower $\%$ marketable fruits in 'Fiesta'. mean Fruit weight was not different between two cultivars. Difference of yield between cultivars was due to fruit number, harves time and root condition. It was caused by cracked fruits to decrease $\%$ marketable fruits. Total yield was greater in nighttime temperature of $18^{\circ}C\;than\;15^{\circ}C$ and marketable yield was considerably greater because of $\%$ marketable fruits was higher. Mean fruit weight was slightly greater in nighttime temperature of $15^{\circ}C\;than\;18^{\circ}C$. Difference of fruit yield in treatments of nighttime temperature was due to fruit number and harvest time. There was not significant difference of yield between daytime temperature of $28^{\circ}C\;and\;31^{\circ}C$, but in $34^{\circ}C$, total and marketable yields were the least and mean fruit weight was the smallest because of decreased $CO_2$ concentration in the house, accerated vegetative growth, and the least chlorophyll content. There were no significant difference in photosynthetic rate, transpiration rate, maximal photochemical efficiency and antioxidant enzyme activities of all temperature treatments in this experiment. However it was clear that a little difference in error range of these results affects the source of crops in any case. It was not acknowledged that compensation effect by high temperature in daytime to the low temperature treatment in nighttime.

• Journal of Bio-Environment Control
• /
• v.13 no.4
• /
• pp.200-208
• /
• 2004

Effects of cucumber and tomato seed germination by previous leaf and root vegetables (cabbage, radish, welsh onion, lettuce) residue in soil were tested in pot condition. Overall, suppression effect of welsh onion residue was the greatest in 4 tested crop residue and followed by radish, cabbage and lettuce, but lettuce residue didn't have effect on cucumber seed germination. Suppression were maintained ca. 20 days but after the time point, growth of cucumber and tomato were enhanced. Enhancing effect of welsh onion residue was the greatest in 4 tested crops residues and followed by radish, cabbage and lettuce. As a conclusion, residue of welsh onion, radish and cabbage were suppressed the germination of cucumber and tomato seeds but enhanced growth after 20 days of treatment. To verify the effective concentration of residue on suppression of germination and growth of radicle of cucumber and tomato, plant extract of welsh onion, radish, cabbage and lettuce were diluted as 5, 10, 17, 23, 35, 50, and $65\%$, and then tested. In low concentration treatment, 5, 10, 17, and $23\%$, all 4 crop extracts didn't suppress cucumber seed germination. High concentration of lettuce extract, 35, 50, and $65\%$, cucumber seed didn't germinate at all. In case of welsh onion extract, only $65\%$ treatment suppressed cucumber seed germination. In low concentration treatment, 17, and $23\%$, only the welsh onion extract suppressed young radicle. In case of high concentration treatment, except $35\%$, all four crops extract suppressed cucumber radicle growth. In low concentration treatment, tomato seed germination was suppressed by lettuce extract only but in high concentration treatment, 35, 50, and $65\%$, all extracts suppressed germination. Especially higher than $50\%$ treatment, tomato seed didn't germinate at all. Radicle growth was highly suppressed in welsh onion and lettuce extract, higher than $23\%$ concentration. As conclusion, leaf and root vegetable extracts suppressed cucumber and tomato seed germination and in high concentration, also suppressed radicle growth.

• Journal of Bio-Environment Control
• /
• v.17 no.1
• /
• pp.43-50
• /
• 2008

This study was conducted to investigate the proper supplied conditions of sodium selenate supplied by fertigation to improve functionality of major western vegetables; beet, broccoli, cabbage lettuce, celery, and parsley in highland. In this work, the growth and content of minerals, ascorbic acid, nitrate, and selenium were measured in western vegetables that treated sodium selenate by different concentration, treatment time and treatment frequency. While there was not different in early growth of some western vegetables among different concentration of sodium selenate; 1,2, 5 and $20\;mg{\cdot}L^{-1}$, at 20 days after treatment, the fresh weight was reduced 33% at cabbage lettuce,47% at broccoli, and 74% at parsley compared control in $5\;mg{\cdot}L^{-1}$ treatment. But the fresh weight of beet and celery reduced just 20% and 15% compared control in even $20\;mg{\cdot}L^{-1}$. The ascorbic acid of cabbage lettuce, celery, and beet increased as sodium selenate concentration increased, so that of cabbage lettuce showed 1.2 times compared control in $20\;mg{\cdot}L^{-1}$ treatment and also that of beet and celery increased 10%. But the ascorbic acid of broccoli and parsley was not influenced by treated sodium selenate. As the concentration of sodium selenate increased, the nitrate contents decreased regardless of crops compared control. This reduced effect of nitrate was highest in cabbage lettuce, followed by beet and celery. The mineral contents, such as K, Ca, and Mg, decreased in all crops, as the concentration of sodium selenate increased. The potassium content showed an obvious negative correlationship with the concentrations of sodium selenate regardless of crops, but the magnesium and calcium content did not show significant difference between treatments. The selenium content increased in proportion as increasing sodium selenate concentrations. The broccoli, celery and parsley treated $20\;mg{\cdot}L^{-1}$ sodium selenate showed 24.4 times, 76.4 times, and 560 times higher than control, respectively. When the sodium selenate supplied to some western vegetables in different growth stage, the selenium content increased 1.3 times and 1.4 times higher in early stage than in late stage in cabbage lettuce and broccoli, respectively. However in parsley and celery, the selenium content showed the highest in middle stage. The selenium content increased in proportion as increasing the sodium selenate treatment frequency, but in above 10 times treatment, the increased effect alleviated in parsley, celery, and cabbage lettuce. On the contrary, the selenium content of broccoli increased constantly as treatment frequency increased.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.4
• /
• pp.194-205
• /
• 1999

Hydrogeochemical variation and environmental isotope at the some abandoned metal mine (Sanggok, Keumsil, Jangpung and Samdeok) creeks of the Hwanggangri mining district were carried out based upon the physicochemical properties for surface water collected of February in 1998. Hydrogeochemical composition of the all water samples are characterized by the relatively significant enrichment of Ca$^{2}$, alkaline ions, N $O_3$$^{－}$ and Cl$^{－}$ in normal surface water, whereas the surface waters near the mining area are relatively enriched in Ca$^{2+$, Mg$^{2＋}$, heavy metals. HC $O_3$$^{－}$ and S $O_4$$^{2－}$. Surface waters of the mining creek have low pH, high EC and extremely high concentrations of TDS compared with surface water of the non-mining creeks. The range of $\delta$D and $\delta$$^{18}$O values (SMOW) in the waters are shown in －65.0 to－71.2$\textperthousand$ and －9.1 to－10.2$\textperthousand$. The d($\delta$D－$\delta$$^{18}$O) value with those of water samples ranged from 7.3 to 10.9. These $\delta$D and $\delta$$^{18/}$ of the acid mine water are more heavy values than those of surface water. The values have revealed the positive correlation between isotopic compositions and major elements, because those $\delta$D and $\delta$$^{18}$O values increase with increasing TDS. HC $O_3$$^{－}$ , S $O_4$$^{2－}$ and Ca$^{2＋}$ concentration. Using WATEQ4F, saturation index of albite calcite, dolomite and mostly clay minerals in water of the mining area show undersaturated and progressively evolved toward the equilibrium condition due to fresh water mixing, however, surface waters of the non-mining area are nearly saturated and/or supersaturated. Geochemical modeling showed that mostly toxic heavy metals within water in the mining creek may exist largely in the from of metal-sulfate (MS $O_4$$^{2－}$), free metal (M$^{2＋}$/), C $O_3$$^{－}$ and/or OH$^{－}$ complex ions. Based on the geology, water chemistry and environmental istopic data the water compositions from the Sanggok and Keumsil mine creek (consist mainly of Cambro-Ordovician carbonate rocks of the Cho-seon Supergroup) show higher PH, Ca$^{2＋}$, Mg$^{2＋}$ , HC $O_3$$^{－}$ and more heavy $\delta$D and $\delta$$^{18}$O values than those from the Jangpung and Samdeok mine creek (consist of age -unknown metasedimentary rocks of the Ogcheon Supergroup and/or Jurassic grani-toids), but each of these waters represents a similar hydrogeochemical evolution path by the mine water mixing.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.4
• /
• pp.27-35
• /
• 2003

The study site located in an industrial complex has a Precambrian age gneiss as a bedrock. The poorly-developed, disturbed soils in the study site have loamy-textured surface soil (1 to 2 m) and gravelly sand alluvium subsurface (2 to 6 m) on the top of weathered gneiss bedrock. The depth of the groundwater table was about 3.5 m below ground surface and increased toward down-gradient of the site. The hydraulic conductivity of transmitted zone (gravelly coarse sand) was in the range of 5.0${\times}$10$\^$-2/∼1.85${\times}$10$\^$-1/ cm/sec. The fine sand layer was in the range of 1.5${\times}$10$\^$-3/ to 7.6${\times}$10$\^$-3/ cm/sec. and the reclaimed upper soil layer was less than 10$\^$-4/ cm/sec. Toluene, ethylbenzene, and xylene (TEX) was the major contaminant in the soil and groundwater. The average depth of the soil contamination was about 1.5 m in the gravelly sand alluvium layer. At the depth interval 2.4∼4.8 m, the highest contamination in the soil is located approximately 50 to 70 m from the suspected source areas. The concentration of TEX in the groundwater was highest in the suspected source area and a lesser concentration in the center and southwest parts of the site. The TEX distribution in the groundwater is associated with their distribution in the soil. Microbial isolation showed that Pseudomonas flurescence, Burkholderia cepacia, and Acinetobactor lwoffi were the dominant aerobic bacteria in the contaminated soils. The analytical results of the groundwater indicated that the concentrations of dissolved oxygen (DO), nitrate, and sulfate in the contaminated area were significantly lower than their concentrations in the none-contaminated control area. The results also indicated that groundwater at the contaminated area is under anaerobic condition and sulfate reduction is the predominant terminal electron accepting process. The total attenuation rate was 0.0017 day$\^$-1/ and the estimated first-order degradation rate constant (λ) was 0.0008 day$\^$-1/.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.5
• /
• pp.501-512
• /
• 2016

The study evaluated methods to measure condensable fine particles in flue gases and measured particulate matter by fuel and material to get precise concentrations and quantities. As a result of the method evaluation, it is required to improve test methods for measuring Condensable Particulate Matter (CPM) emitted after the conventional Filterable Particulate Matter (FPM) measurement process. Relative Standard Deviation (RSD) based on the evaluated analysis process showed that RSD percentages of FPM and CPM were around 27.0~139.5%. As errors in the process of CPM measurement and analysis can be caused while separating and dehydrating organic and inorganic materials from condensed liquid samples, transporting samples, and titrating ammonium hydroxide in the sample, it is required to comply with the exact test procedures. As for characteristics of FPM and CPM concentrations, CPM had about 1.6~63 times higher concentrations than FPM, and CPM caused huge increase in PM mass concentrations. Also, emission concentrations and quantities varied according to the characteristics of each fuel, the size of emitting facilities, operational conditions of emitters, etc. PM in the flue gases mostly consisted of CPM (61~99%), and the result of organic/inorganic component analysis revealed that organic dusts accounted for 30~88%. High-efficiency prevention facilities also had high concentrations of CPM due to large amounts of $NO_x$, and the more fuels, the more inorganic dusts. As a result of comparison between emission coefficients by fuel and the EPA AP-42, FPM had lower result values compared to that in the US materials, and CPM had higher values than FPM. For the emission coefficients of the total PM (FPM+CPM) by industry, that of thermal power stations (bituminous coal) was 71.64 g/ton, and cement manufacturing facility (blended fuels) 18.90 g/ton. In order to estimate emission quantities and coefficients proper to the circumstances of air pollutant-emitting facilities in Korea, measurement data need to be calculated in stages by facility condition according to the CPM measurement method in the study. About 80% of PM in flue gases are CPM, and a half of which are organic dusts that are mostly unknown yet. For effective management and control of PM in flue gases, it is necessary to identify the current conditions through quantitative and qualitative analysis of harmful organic substances, and have more interest in and conduct studies on unknown materials' measurements and behaviors.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.4
• /
• pp.199-213
• /
• 2008

Saemangeum salt-water Lake has been created by the completion of the sea-dike in April 2006. To monitor the water qualities of the lake during the sea-dike construction, salinity, SS, nutrients(DIN, DIP, DISi), and chlorophyll-$\alpha$ was analyzed for the surface water from 1999 to 2007. Due to the dike construction, weaker tidal current and lesser resuspension of bottom sediment resulted in the marked decrease of the concentrations of SS in the lake water. Consequently the clearer lake water has provided better condition for primary production with deeper penetration of sunlight into the water column and sufficient nutrient content in the water. Finally the chlorophyll-$\alpha$ content became approximately double in the concentration after the dike construction. Highly stimulated algal production with the marked decrease of the concentrations of SS was decreased the concentration of DIP in the surface water. On the other hand the concentration of DIN and DISi in surface water was increased after dike construction due to the expansion of the freshwater and the supply from bottom layer. As a result, the lake revealed an extremely high NIP ratio and a DIP-limited ecosystem. The lake has been transformed from a typical coastal ecosystem to a brackish one. Since the dike completion, the lake has shown a similar change pattern to the Geum River estuary. Due to the salt-wedge intrusion of seawater, it is highly probable to expect the formation of low-oxygen zone at the bottom layer near the river-mouth area of the lake during the summer. Therefore we need a continuous sentinel monitoring of bottom water qualities in the near future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.188-193
• /
• 2015

It has been generally recognized that $N_2O$(Nitrous Oxide) emission from marine diesel engines has a close correlation with $SO_2$(Sulfur Dioxide) emission, and diversity of fuel elements using ships affects characteristics of the $N_2O$ emission. According to recent reports, in case of existence of an enough large NO(Nitric Oxide) generated as fuel combustion, effect of the $SO_2$ emission in exhaust gas on the $N_2O$ formation is more vast than effect of the NO. Therefore, $N_2O$ formation due to the $SO_2$ element operates on a important factor in EGR(Exhaust Gas Recirculation) systems for NOx reduction. An aim of this experimental study is to investigate that intake gas of the diesel engine with increasing of $SO_2$ flow rate affects $N_2O$ emission in exhaust gas. A test engine using this experiment was a 4-stroke direct injection diesel engine with maximum output of 12 kW at 2600rpm, and operating condition was set up at a 75% load. A standard $SO_2$ gas with 0.499%($m^3/m^3$) was used for changing of $SO_2$ concentration in intake gas. In conclusion, the diesel fuel included out sulfur elements did mot emit the $SO_2$ emission, and the $SO_2$ emission in exhaust gas according as increment of the $SO_2$ standard gas had almost the same ratio compared with $SO_2$ rate in mixture inlet gas. Furthermore, the $N_2O$ element in exhaust gas was formed as $SO_2$ mixture in intake gas because increment of $SO_2$ flow rate in intake gas increased $N_2O$ emission. Hence, diesel fuels included sulfur compounds were combined into $SO_2$ in combustion, and $N_2O$ in exhaust gas should be generated to react with NO and $SO_2$ which exist in a combustion chamber.