• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.135-143
• /
• 2021

Conservation treatment that involved filling the lifting parts of wooden cultural heritage is carried out by obtaining wood or wood powder of the same species and mixing it with synthetic resin or natural glue to charge the blank area. Various concentrations and mixing ratios of adhesives and additives are used, depending on the type and condition of the target. Accordingly, in this study, we determined the conditions of the filler suitable for conservation treatment of wooden sculptures with lifted or separated bark in the National Museum of Modern and Contemporary Art. The optimal filler conditions for each adhesive were selected based on drying speed, shrinkage and expansion rates, and physical deformation degree. Then, to verify their actual applicability, these fillers were applied to wood and exposed to high-humidity environment and their cross-sections were observed. The fillers showed stable application in the following order: animal glue, PVAc adhesive, acrylic adhesive. In conclusion, a 1:2 mixture of animal glue and wood powder is a suitable filler for conservation treatment of wooden sculpture with lifted bark. The results of this study suggest appropriate ways to stabilize the bark that was lifted or separated from a wooden sculpture, thus enabling the future conservation treatment of the artworks under similar conditions.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.111-117
• /
• 2021

This research work is to suggest the experimental results capable of solving an initial unsuitability of combustion and environment in a constant volume combustion chamber by using LFG(Land Fill Gas) which consists of 40% CO₂ and 60% CH₄. The experimental condition is set as 0.9~1.6 of air-fuel ratio, 3bar of combustion pressure, 25℃ of room temperature, methane for using gas, and 2.5~4.5 of Pre-chamber hole sizes. As a result, it can be seen that diffusion of initial flame is significantly increased by M3.0 model comparing with other one. The reason for the characteristics is that orifice effect is extremely improved by 0.9, 1.0, and 1.2 of air-fuel ratio comparing with other one. Consequently, this experiment is shown that M3.0 model is partially capable of improving combustion performance than a conventional ignition plug in case of applying to LFG with Pre-chamber design.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.4
• /
• pp.69-78
• /
• 2022

Geotextile tubes are widely used to prevent erosion in coastal areas and to replace the backfill for shore slopes in the reclamation of land using dredged soil. In this study, The triaxial confining pressures were chosen as 10kPa, 50kPa, or 100kPa for the specimens reinforced with geotextile considering the condition in the site. The strain behavior under various compressive stresses was then identified. At strains 0% to 7%, the stress-strain behavior was the same due to the effect of initial strain hardening, in which the force was exerted according to the relaxation of the geotextile regardless of the confining pressure (≤100kPa). At strains of 7% or more, the specimen with the small confining pressure had smaller deformation under load, which increases the tensile resistance provided by the reinforcing geotextile. Brittle fracture was then observed due to strain softening and the deviator stress abruptly decreased. This is different from the phenomenon in which the shear strength increases as the confining pressure increases in general triaxial compression tests. In the geoxtile-confined tests, geotextiles are primarily subjected to tensile displacement. Thereafter, the modulus of elasticity increases rapidly, which exhibits the elastic behavior of the geotextile.

• Journal of Marine Life Science
• /
• v.7 no.2
• /
• pp.86-93
• /
• 2022

The ecotoxicity test method using Undaria pinnatifida spore is challenging to use throughout the year. Since U. pinnatifida female gametophytes can be cultured in the laboratory, they can be used for ecotoxicity testing at any time. Changes in female gametophyte survival rate and relative growth rate in U. pinnatifida exposed to various environmental conditions were analyzed. The female gametophyte of U. pinnatifida was exposed to salinity (5~40 psu), temperature (5~30℃), pH (4~10), and light intensity (0~120 μmol photon m^-2 s^-1). Based on the highest average value, the survival rate of female gametophyte was highest at a temperature of 20℃, salinity 27.5 psu, pH 8, and light intensity 30 μmol photon m^-2 s^-1. And the relative growth rate was highest at a temperature of 15℃, salinity 35 psu, pH 9, and light intensity of 60 μmol photon m^-2 s^-1. As a result of this study, the method using the optimal conditions for the survival rate and relative growth rate is expected to be a practical test method that can complement the current method.

• International Journal of Computer Science & Network Security
• /
• v.22 no.9
• /
• pp.35-42
• /
• 2022

The article deals with the role of extra-curricular work by means of multimedia technologies in order to improve the quality of training of future specialists. An important condition for achieving high results in training specialists is the optimal combination of classroom and independent extra-curricular work of students by means of multimedia technologies. Very significant is the development of student independence, the formation of skills of independent search activity, the ability to take responsibility, independently solve a problem, find constructive solutions, a way out of a crisis situation, and so on. Extra-curricular work forms students' ability to master the techniques of analysis, synthesis, generalization, comparison; develops flexibility of thinking; opens up opportunities for the development and stabilization of positive learning motives to activate the process of mastering knowledge by means of multimedia technologies as a means of forming the personality of a highly qualified specialist. The concept of multimedia as one of the priority areas of Information Technology, which plays a particularly important role in the process of informatization of education, is revealed, and its advantages in education are shown. The advent of multimedia systems optimizes transformations in education, in many areas of professional activity, science, art, etc. The necessity of distance learning to improve the quality of training of future specialists using multimedia technologies in extra-curricular work is justified. The effectiveness of pedagogical support in the process of distance learning is achieved by the following conditions, which is revealed in the article. Various forms and types of extra-curricular work of students that are used in the modern practice of the educational environment of a higher education institution are described. Scientific and informational activity is considered a key area of information activity. The analysis of scientific and information activities in the field of education allows us to identify its main functions, which emphasize the growing role of scientific information in the education system, in particular, extra-curricular work using multimedia technologies. Operational, complete, accurate, targeted information that meets objective and subjective needs becomes an important link between the field of management, science and practice.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.8
• /
• pp.331-338
• /
• 2022

Successor representation (SR) is a model of human reinforcement learning (RL) mimicking the underlying mechanism of hippocampal cells constructing cognitive maps. SR utilizes these learned features to adaptively respond to the frequent reward changes. In this paper, we evaluated the performance of SR under the context where changes in latent variables of environments trigger the reward structure changes. For a benchmark test, we adopted SR-Dyna, an integration of SR into goal-driven Dyna RL algorithm in the 2-stage Markov Decision Task (MDT) in which we can intentionally manipulate the latent variables - state transition uncertainty and goal-condition. To precisely investigate the characteristics of SR, we conducted the experiments while controlling each latent variable that affects the changes in reward structure. Evaluation results showed that SR-Dyna could learn to respond to the reward changes in relation to the changes in latent variables, but could not learn rapidly in that situation. This brings about the necessity to build more robust RL models that can rapidly learn to respond to the frequent changes in the environment in which latent variables and reward structure change at the same time.

• Korean Journal of Ecology and Environment
• /
• v.55 no.4
• /
• pp.305-319
• /
• 2022

The community temperature index (CTI) reflects the temperature and environmental preferences of the community. We investigated the distribution patterns of major aquatic insect assemblages (Ephemeroptera, Plecoptera, and Trichoptera; EPT) based on CTI in streams of South Korea. We selected unpolluted 151 study sites at upper streams(less than 3^rd) with less than 1.5 mg L^-1 of biochemical oxygen demand. Study sites were clustered into six groups based on the similarities of their EPT composition. All three orders showed a continuous decrease in the number of species as CTI increased, especially in Plecoptera. In addition, the functional feeding groups were also significantly changed according the CTI changes. Temperature tolerance range of each group's indicator species varied according to the CTI of the group. Finally, changes of CTI reflected differences of EPT assemblages according to the differences of environmental condition including temperature. Therefore, CTI can be applied to the evaluation and preservation of stream ecosystems and prediction of community changes due to climate change.

• Korean Journal of Ecology and Environment
• /
• v.55 no.2
• /
• pp.156-166
• /
• 2022

Understanding the characteristics of reservoir water quality is fundamental in reservoir ecosystem management. The water quality of reservoirs is affected by various factors including hydro-morphology of reservoirs, land use/cover, and human activities in their catchments. In this study, we classified 83 major reservoirs in South Korea based on nine physicochemical factors (pH, dissolved oxygen, chemical oxygen demand, total suspended solid, total nitrogen, total phosphorus, total organic carbon, electric conductivity, and chlorophyll-a) measured for five years (2015~2019). Study reservoirs were classified into five main clusters through hierarchical cluster analysis. Each cluster reflected differences in the water quality of reservoirs as well as hydromorphological variables such as elevation, catchment area, full water level, and full storage. In particular, water quality condition was low at a low elevation with large reservoirs representing cluster I. In the comparison of eutrophication status in major reservoirs in South Korea using the Korean trophic state index, in some reservoirs including cluster IV composed of lagoons, the eutrophication was improved compared to 2004~2008. However, eutrophication status has been more impaired in most agricultural reservoirs in clusters I, III, and V than past. Therefore, more attention is needed to improve the water quality of these reservoirs.

• Korean Journal of Ecology and Environment
• /
• v.55 no.2
• /
• pp.175-183
• /
• 2022

In this study, 46 reservoirs in South Korea were characterized based on heavy metal concentration in sediments. We analyzed the relationship between heavy metal concentrations, physicochemical water quality and hydromorphological factors in each reservoir. Study reservoirs were classified into five groups of reservoirs, by hierarchical cluster analysis based on the similarities of heavy metal concentration. Group 1 had the most severe sediment heavy metal contamination among the groups, whereas Groups 2 and 3 showed low levels of heavy metal contamination. Group 4 displayed high value of Ni, and Group 5 showed high contamination of Pb, Cu, Cr, Ni, and Hg. Groups 1 and 5, which had high concentration of heavy metals in sediments, showed a high density of mines in the catchment of reservoirs. Heavy metal concentration was high in reservoirs with large capacity or the ones located at higher elevation, and also highly related with number of mines in the catchment of reservoir. This study can contribute to the systematic management of sediment heavy metals in reservoirs.

• Journal of Internet of Things and Convergence
• /
• v.9 no.1
• /
• pp.89-95
• /
• 2023

In January 2007, the Remains Excavation and Investigation Team of the Ministry of National Defense was established, and full-scale excavation of remains was promoted. Currently, the scope of the excavation is being expanded to Baekma Hill within the DMZ, where fierce battles were fought during the Korean War. Now, many remains and remains are being excavated in Baekma hill. Most are in damaged condition. Therefore, in this study, the original form of the excavated remains was restored using 3D scanning and 3D modeling. This digital restoration method can be an alternative to compensate for the disadvantages of the manual method. Currently, various digital restorations using 3D technology are active in the field of cultural heritage. Digitally restored materials can be used as basic data for digital heritage. Based on this, various contents related to excavation of remains and patriots and veterans can be developed. Furthermore, if digital human restoration is made based on the excavated remains, it will be possible to reproduce the appearance of the dead.