• Science of Emotion and Sensibility
• /
• v.22 no.1
• /
• pp.89-100
• /
• 2019

Sleep apnea, a medical condition associated with a variety of complications, is generally monitored by standard sleep polysomnography, which is expensive and uncomfortable. To overcome these limitations, this study proposes an unconstrained wearable monitoring system with stretch-fiber sensors that integrate with the wearer's clothing. The system allows patients to undergo examinations in a familiar environment while minimizing the occurrence of skin allergies caused by adhesive tools. As smart clothing for adult males with sleep apnea, long-sleeved T-shirts embedding fibrous sensors were developed, enabling real-time monitoring of the patients' breathing rate, oxygen saturation, and airflow as sleep apnea diagnostic indicators. The gauge factor was measured as 20.3 in sample 4. The maximum breathing intake, measured during three large breaths, was 2048 ml. the oxygen saturation was measured before and during breath-holding. The oxygen saturation change was 69.45%, showing a minimum measurable oxygen saturation of 70%. After washing the garment, the gauge factor reduced only to 18.0, confirming the durability of the proposed system. The wearable sleep apnea monitoring smart clothes are readily available in the home and can measure three indicators of sleep apnea: respiration rate, breathing flow and oxygen saturation.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.2
• /
• pp.87-102
• /
• 2019

Pallancata Ag mine is located at the Ayacucho region 520 km southeast of Lima. The geology of mine area consists of mainly Cenozoic volcanic-intrusive rocks, which are composed of tuff, andesitic lava, andesitic tuff, pyroclastic flow, volcano clasts, rhyolite and quartz monzonite. This mine have about 100 quartz veins in tuff filling regional faults orienting NW, NE and EW directions. The Ag grades in quartz veins are from 40 to 1,000 g/t. Quartz veins vary from 0.1 m to 25 m in thickness and extend to about 3,000 m in strike length. Quartz veins show following textures including zonation, cavity, massive, breccia, crustiform, colloform and comb textures. Wallrock alteration features including silicification, sericitization, pyritization, chloritization and argillitization are obvious. The quartz veins contain calcite, chalcedony, adularia, fluorite, rutile, zircon, apatite, Fe oxide, REE mineral, Cr oxide, Al-Si-O mineral, pyrite, sphalerite, chalcopyrite, galena, electrum, proustite-pyrargyrite, pearceite-polybasite and acanthite. The temperature and sulfur fugacity ($f_{s2}$) of the Ag mineralization estimated from the mineral assemblages and mineral compositions are ranging from 118 to $222^{\circ}C$ and from $10^{-20.8}$ to $10^{-13.2}atm$, respectively. The relatively low temperature and sulfur-oxygen fugacities in the hydrothermal fluids during the Ag mineralization in Pallancata might be due to cooling and/or boiling of Ag-bearing fluids by mixing of meteoric water in the relatively shallow hydrothermal environment. The hydrothermal condition may be corresponding to an intermediate sulfidation epithermal mineralization.

• Journal of Arbitration Studies
• /
• v.28 no.4
• /
• pp.3-42
• /
• 2018

This paper aims to explore ways to develop the arbitration industry in Korea. The prospects for the promotion of the arbitration industry in Korea are never dim. International arbitration competitiveness is somewhat lower than its competitors at present, but the international economic base to support it is solid, and the domestic arbitration environment seems to be sufficient to support the development possibility of arbitration. Since geographical and economic factors have already been defined, Korea must at least improve the arbitration act with passion and vision for the best one. The arbitration act that is the most accessible to arbitration consumers is the best arbitration act. The important thing is to have an arbitration act that makes people want to use more than litigation or other dispute resolution procedures. There is no hope of remaining as a "second mover" in the field of arbitration law. One should have a will and ambition to become a "first mover" even if it is risky. Considering the situation of the current arbitration law, it is necessary to start an arbitration appeal system in order to become a consumer-friendly arbitration law, and it is necessary to examine ways of integrating the grant of execution clause and enforcement application procedures. The abolition of the condition of Article 35 of the Arbitration Act, which rules the validity of the arbitration award, will help promote international arbitration. Exclusion agreements of setting aside against arbitration awards must also be fully recognized. It is also important to publish a widely cited international arbitration journal. In order to respond to the fourth industrial revolution era, it is necessary to support the establishment of a dispute resolution system that utilizes IT technology. In order to actively engage the arbitrators in the market, it is necessary to abolish the regulations that exist in the Attorneys-at-Law Act. There is also a need to allocate more budget to educate arbitration consumers and to establish arbitration training centers to strengthen domestic arbitration education. It is also necessary to evaluate and verify the Arbitration Promotion Act so that it can achieve results. In the international arbitration market, competition is fierce and competitors are already taking the initiative, so in order not to miss the timing, Korea needs to activate international arbitration first. In order to activate international arbitration, the arbitration body needs to be managed with the same mobility and strategy as the agency in the marketplace. In Korea, unlike in Singapore and Hong Kong, it is necessary to recognize that the size of the domestic arbitration market is very likely to increase sharply due to the economic size of the country and the large market potential it can bring from litigation. In order to promote the arbitration industry, what is most important is to make arbitration activities in accordance with the principles of the market and to establish an institutional basis to enable competition. It is urgently required to change the perception of the relevant government departments and arbitration officials.

• Journal of the Korea Convergence Society
• /
• v.10 no.9
• /
• pp.75-84
• /
• 2019

This study aimed to identify the factors affecting the nursing performance and the convergence relationships of leisure satisfaction, job stress, and nursing performance among nurses. Participants included 150 nurses working at 2 hospitals in C city from August 3 to September 15, 2018. The data were analyzed using descriptive statistics, independent t-test, one-way ANOVA with Scheffe's test, Pearson correlation coefficients, and multiple regression by SPSS 23.0 program. Nursing performance were significantly differences in age (F=4.78, p=.003), marital status (F=2.74, p=.007), length of clinical career (F=3.34, p=.012), and health condition (F=5.23, p=.002). Nursing performance was a positively correlated with leisure satisfaction (r=.32, p<.001) and a negatively correlated with job stress (r=-19, p=.020), and job stress was a negatively correlated with leisure satisfaction (r=-.32, p=.005). The factors affecting the nursing performance of clinical nurses were age (${\beta}=.20$, p=.008) and leisure satisfaction (${\beta}=.28$, p<.001), and these variables explained about 19.6% of the variance in nursing performance. In order to improve nursing performance, it is necessary to provide working environment and institutional support for increasing leisure satisfaction and reducing job stress and age-differentiated approaches.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.28-36
• /
• 2018

There was a difference in recognition of respirators according to the educational performance environment. they were showed higher recognition of respirators of group by internal and external mix trainer, less than 6 months, over 1hour, more than 5 times, variety of education. To identify the relationship between types of job classification(typical and atypical)and the levels of recognition of respirators, a total of 153 workers in a business workplace. mainly, typical workers showed higher recognition of respirators than atypical workers. Training of correct wearing showed high demands both typical and atypical workers. Descriptive statistics(SAS ver 9.2)was performed. the results of recognition of respirators were analyzed the mean and standard deviation by t-test, and anova, fit factor is used geometric means(geometric standard deviation), paired t-test, Wilcoxon analysis(P=0.05). Particulate filtering facepiece respirators (PFFR) is one of the most widely used items of personal protective equipments, and a tight fit of the respirators on the wearers is critical for the protection effectiveness. In order to effectively protect the workers through the respirators, it is important to find and evaluate the ways that can be readily applicable at the workplace to improve the fit of the respirators. This study was designed to evaluate effects of mask style (cup or foldable type) and donning training on fit factors (FF) of the respirators, since these are available at various workplace, especially at small business workplace. A total of 40 study subjects, comprised of employment type workers in metalworking industries, were enrolled in this study. The FF were quantitatively measured before and after training related to the proper donning and use of cup or foldable-type respirators. The pass/fail criterion of FF was set at 100. After the donning training for the cup-type mask, fit test were increased by 769%. but foldable-type mask was also increased after the donning training, the GM of FF for the foldable-type mask and it's increase rate were smaller as compared to the cup-type mask. Furthermore, the differences of the increase rates of the GM of FF in employment type of the subjects were not significantly for the foldable-type mask. These results imply that the raining on the donning and use of PFFR can enhance the protection effectiveness of cup or foldable-type mask, and that the training effects for the foldable-type mask is less significant than that for the cup-type mask. Therefore, it is recommended that the donning training and fit tests should be conducted before the use of the PFFR, and listening to workers opinion regularly.

• Journal of Environmental Impact Assessment
• /
• v.28 no.1
• /
• pp.49-62
• /
• 2019

Environmental changes can affect life-history traits, such as growth rate and reproduction, and organisms adapt on a given environmental condition to maximize ecological fitness. This study shows the effects of water temperature and dissolved oxygen level on early growth and accumulated damage in fish using a dynamic-state-dependent model. I have hypothesized that the level of foraging activity is related to growth and stress and so the optimal level can maximize reproductive success - ultimately, fitness. The critical temperature and dissolved oxygen (DO) is also defined as inducing the maximum growth rate at the level. So, the model predicts the highest growth rate at oxygen saturation and lower growth rate at lower or higher level of DO in water. Lower DO (i.e., hypoxia) causes slower growth rate through higher amount of accumulated stress whereas higher DO (i.e., hyperoxia) induces faster growth rate, but smaller body size. In addition, I show that there is lower impact when considering simple or independent environmental factors on environmental assessment. My findings suggest that multiple environmental factors as physiological ecology approach should be considered to improve impact assessment in environmental changes and a further study is needed to develop advanced assessment tools considering multiple environmental factors.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.1
• /
• pp.9-15
• /
• 2019

Here, we present a facile route to fabricate a vertically stacked 3D porous structure-based triboelectric nanogenerator (TENG) that can be used to harvest energy from the friction in a repetitive contact-separation mode. The unit component of TENG consists of thin Al foil electrodes integrated with microstructured 3D foams such as Ni, Cu, and polyurethane (PU), which provide advantageous tribo-surfaces specifically to increase the friction area to the elastomeric counter contact surfaces (i.e., polydimethylsiloxane, PDMS). The periodic contact/separation-induced triboelectric power generation from a single unit of the 3D porous structure-based TENG was up to $0.74mW/m^2$ under a mild condition. To demonstrate the potential applications of our approach, we applied our TENGs to small-scale devices, operating 48 LEDs and capacitors. We envision that this energy harvesting technology can be expanded to the applications of sustainably operating portable electronic devices in a simple and cost-effective manner by effectively harvesting wasted energy resources from the environment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.2
• /
• pp.219-225
• /
• 2019

The purpose of this study was to investigate the odontoblast gene expression related to the subculture speed of supernumerary dental pulp stem cells (sDPSCs). The stem cell is undifferentiated cells which has the ability to differentiate into various cells. Specific stimulation or environment induces cell differentiation, and these differentiation leads to bone or muscle formation. 20 sDPSCs were obtained from 20 children under aseptic condition. During the culture through the 10th passage, the third passage cells which showed short subculture period and 10th passage cells which showed long subculture period were earned. Each cell was divided into differentiated group and non-differentiated group. Quantitative real-time polychain reaction (q-RT-PCR) was performed for each group. The genes related to odontoblast differentiation, Alkaline Phosphatase (ALP), Osteocalcin (OCN), Osteonectin (ONT), Dentin sialophosphoprotein (DSPP) and Dentin matrix acidic phosphoprotein 1 (DMP-1), were measured. Differentiated cells showed more gene expression levels. Undifferentiated cells showed higher gene expression level in 10th passages but differentiated cells showed higher gene expression level in 3rd passages. Cells that showed faster subculture period showed relatively lower gene expression level except for OCN and DSPP.

• Science of Emotion and Sensibility
• /
• v.24 no.3
• /
• pp.41-60
• /
• 2021

The purpose of this research was to determine whether multimodal cues in an online shopping environment could enhance tactile consumer mental imagery, purchase intentions, and attitudes towards an apparel product. One limitation of online retail is that consumers are unable to physically touch the items. However, as tactile information plays an important role in consumer decisions especially for apparel products, this study investigated the effects of multimodal cues on overcoming the lack of tactile stimuli. In experiment 1, to explore the product, the participants were randomly assigned to four conditions; picture only, video without sound, video with corresponding sound, and video with discordant sound; after which tactile mental imagery vividness, ease of imagination, attitude, and purchase intentions were measured. It was found that the video with discordant sound had the lowest average scores of all dependent variables. A within-participants design was used in experiment 2, in which all participants explored the same product in the four conditions in a random order. They were told that they were visiting four different brands on a price comparison web site. After the same variables as in experiment 1, including the need for touch, were measured, the repeated measures ANCOVA results revealed that compared to the other conditions, the video with the corresponding sound significantly enhanced tactile mental imagery vividness, attitude, and purchase intentions. However, the discordant condition had significantly lower attitudes and purchase intentions. The dual mediation analysis also revealed that the multimodal cue conditions significantly predicted attitudes and purchase intentions by sequentially mediating the imagery vividness and ease of imagination. In sum, vivid tactile mental imagery triggered using audio-visual stimuli could have a positive effect on consumer decision making by making it easier to imagine a situation where consumers could touch and use the product.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.320-323
• /
• 2014

Today is going with the advancement of intelligent transportation systems and traffic environment and helping to provide safe and convenient service through a mobile device work with the popularization of the vehicle black box. The traffic flow by a variety of causes is constantly changing, it is often unable to prepare the driver, depending on external factors can not be controlled by the power of the public, leading to a major accident. The system needs to pass the real-time weather data in the inter-operator to prevent this. The proposed detection algorithm weather information delivered real-time weather information for this paper. The weather condition is detected by using the contrast between the histogram of the motion of the wiper and the clear day algorithm. In general, the wiper is worked in extreme weather conditions that will have a value different contrast due to rain or snow. Situation was considered clear, snowy conditions, such as using it on a rainy situation. First, designated as ROI (Region Of Interest) of the minimum area that can be detected in order to reduce the amount of calculation for the wiper, the wiper, which was detected through the operation of the threshold Thresholding the brightness of the vehicle wiper. In addition, we distinguish the value of each meteorological situation by using contrast. Results was obtained to 80% for the snow conditions, a rainy situation.