• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.10-18
• /
• 2018

The primary purposes of this study are to understand a fundamental aspect of current uniformity around a reinforcing bar (rebar) in cement mortar, and to develop an accurate monitoring method in a wet-dry cycling process with the alternative current (AC) impedance method. Three cement mortar specimens with two embedded rebars were prepared in the laboratory. As a main variable, the distance between two rebars was designed to be 10, 20 and 30 mm with the same thickness of 20 mm. To simulate the corrosion of rebars in concrete structures in a marine environment, three cement mortar specimens were exposed to 15 wet-drying cycles (24-hour-immersion in seawater and 48-hour-drying in a room temperature) in the laboratory. It was observed that the potential level shifted to a noble value during corrosion potential monitoring, which is attributed to acceleration of dissolved oxygen diffusion at the drying process. AC impedance was measured in a frequency range from 100 kHz to 1 mHz on a wet-drying process. A theoretical model was proposed to explain the interface condition between the rebars and cement mortar by using the equivalent circuit consisting of a solution resistance, a charge transfer resistance and a CPE (constant phase element). It was observed that the diffusion impedance appeared in a low frequency range as corrosion of rebars progresses. At the drying stage of the wet-drying cycles, the currents line for monitoring tended to be non-uniform at the interface of rebar/mortar, being phase shift, ${\theta}$, close to $-45^{\circ}$.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.611-617
• /
• 1990

This study was conducted to breed a high vitamin $B_{12}$ producer by the fusion of protoplasts between Bacillus natto and Bacillus megaterium. Auxotrophic mutants of Bacillus natto SH-34 ($thr^-try^-rif^r$) and Bacillus megaterium BK-13 ($arg^-ade^-lys^-str^r$) which showed high protease activity and production of vitamin $B_{12}$, respectively, were isolated for the fusion experiment. Protoplasts were induced by incubating the cells with lysis solution containing $500{\mu}/ml$ lysozyme, and the ratio of protoplast and regeneration formation were ranged from 99% and 67%, respectively. Fusion frequencies of fusants between Bacillus natto SH-34 and Bacillus megaterium BK-13 were appeared in the ranges of $1.0{\times}10^{-5}$ under the treatment of 30% PEG 6000 containing 3% PVP. The fusant, MNF-72 showed the highest product yield of $7.85{\mu}g/g-cell\;vitamin\;B_{12}$ in production medium. For the improvement of productivity, the immobilization of fusants with sodium alginate was carried out. In batch and continuous fermentation systems, the productivity were determined to be $0.58{\mu}g/ml.hr\;and\;0.80{\mu}g/ml.hr\;vitamin\;B_{12}$ under optimum condition, respectivity.

• Atmosphere
• /
• v.21 no.1
• /
• pp.57-67
• /
• 2011

Aerosol lidar ratio (extinction-to-backscatter ratio) at 532 nm was determined using 4-year measurements of elastic-backscatter lidar and sky radiometer at Seoul National University of Seoul, Korea. The mean lidar ratio (with standard deviation) based on 4 years of measurements is found to be $61.7{\pm}16.5$ sr, and weak seasonal variations are noted with a maximum in JJA ($68.1{\pm}16.8$ sr) and a minimum in DJF ($57.2{\pm}17.9$ sr). The lidar ratios for clean, dust, and polluted conditions are estimated to be $45.0{\pm}9.5$ sr, $51.7{\pm}13.7$ sr, and $62.2{\pm}13.2$ sr, respectively. While the lidar ratio for the polluted condition is appears to be consistent with previous studies, clean and dust conditions tend to have larger ratios, compared to previous estimates. This discrepancy is thought to be mainly due to the anthropogenic aerosols existing throughout the year around Seoul, which may cause increased lidar ratios even for clean and dust conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.421-430
• /
• 2010

Now a days, as a communications network is being broadband, IPTV(Internet Protocol Television) service which provides various two-way TV service is increasing. But as the data which is transmitted between IPTV set-top box and smart card is almost transmitted to set-top box, the illegal user who gets legal authority by approaching to the context of contents illegally using McComac Hack Attack is not prevented perfectly. In this paper, set-top box access security model is proposed which is for the protection from McComac Hack Attack that tries to get permission for access of IPTV service illegally making data line which is connected from smart card to set-top box by using same kind of other set-top box which illegal user uses. The proposed model reports the result of test which tests the user who wants to get permission illegally by registration the information of a condition of smart card which is usable in set-top box in certification server so that it prevents illegal user. Specially, the proposed model strengthen the security about set-top box by adapting public key which is used for establishing neighbor link and inter-certification process though secret value and random number which is created by Pseudo random function.

• Korean Journal of Ichthyology
• /
• v.32 no.3
• /
• pp.148-159
• /
• 2020

This study investigated the seasonal and inter-annual changes in vertical distribution and size spectrum of walleye pollock, Gadus chalcogrammus inhabiting middle eastern coast of Korea (hear after pollock). Pollock was distributed between 50 m and 600 m depth range, and body size (total length) ranged from 16.6 cm to 81.5 cm. The trends of population body size were increased in autumn and winter and decreased in spring and summer. Vertical distribution of pollock showned depth-dependent patterns with distributing smaller individuals mainly in the upper layer (shallower depth), while larger fish in deeper habitats. Those patterns in vertical distribution of pollock population is probably due to be the results of energy-saving strategy, metabolic effects, and changes in prey selections according to pollock growth, derived from spatial and temporal changes in oceanic condition in habitat grounds. When water temperature in upper layer were increased and that of below thermocline depth became decreased in 2017, the ratio of smaller (<35 cm) and larger (≥35 cm) individuals was biased toward larger fishes, extending their distribution into shallow depth, and consequently main fishing ground was formed in far from coastal area. In addition, the ratio of smaller individual distributing between 100~300 m was increased with decreasing temperature gradient between below thermocline and bottom layer. Changes in spatial and temporal distributions of pollock population likely be related with vertical and horizontal changes in oceanic conditions and, consequently food supplies.

• Polymer(Korea)
• /
• v.30 no.5
• /
• pp.445-452
• /
• 2006

In this study, we investigated interaction of Schwann cells (SCs) with various cell-adhesive coated polymer surface. We used cell-adhesives that like a fibronectin (FN), fibrinogen(FG), laminin(LM), vitronectin (VN), poly-D-Iysine (PDL), and poly-L-Iysine (PLL) to coat PLGA film surface and evaluated the surface property of coated or not PLGA films by measurement of water contact angle and ESCA. SCs were cultured on coated or non-coated PLGA film surface, and then examined the cell adhesion and proliferation by cell count and SEM observation. Cell count results revealed initial cell adhesion related to protein adsorption on PLGA surface. In addition, serum content in media related to cell proliferation rate. In this result, we recognized that adhesion and proliferation of SCs were affected by specific cell-adhesives. In these results, we recognized that is important to provide the suitable surface environment according to cell types and culture condition for improvement of cell adhesion and proliferation.

• The Journal of the Petrological Society of Korea
• /
• v.11 no.1
• /
• pp.30-48
• /
• 2002

Phenocrysts with rapakivi texture are easily observed in Bangeojin granite. The rapakivi texture is composed of inner pinkish alkali feldspars and white-colored mantling plagioclase. The Bangeojin granite distinctively includes lots of mafic microgranular enclaves and can be divided into five rock facies: (1) enclave-poor granite (EPG); (2) enclave-rich granite (ERG); (3) mafic microgranular enclave (MME); (4) hybrid zone between mafic microgranular enclave and granite (HZ); (5) hybrid zone-like enclaves (HLE). The rapakivi textures are observed in these five rock facies with no difference in shape and size. Plagioclase mantle commonly shows dendritic texture that is an important indicator to know the rapakivi genesis. The mantling texture would indicate supercooling condition during magma solidification process. In addition, mafic microgranular enclaves would imply the magma mingling environment. The magma mixing process had possibly caused the mantling texture. An abundance of rapakivi phenocrysts in HZ and the influxing phenomenon of the phenocrysts into MME support that there were physical chemical exchanges during the mingling. And this model of the magma mixing/mingling explain well the heterogeneous distribution of the rapakivi phenocrysts in the five rock facies. Therefore the rapakivi textures in the Bangeojin granite would have been formed by magma mixing process.

• Clean Technology
• /
• v.17 no.4
• /
• pp.285-299
• /
• 2011

As one of the REACH obligations, the extended safety data sheet (eSDS) should be communicated within the supply chain under the REACH Regulation. Based on technical guidance documents published on the ECHAs website and survey of EU's recent REACH-related informations, this paper includes a study on details of how to develop exposure scenarios (ES) such as structure of ES, process of ES develpoment, standard workflows and key input data to develop ES with an introduction of eSDS concept. This paper also contains an overview on operational conditions (OCs) and risk management measures (RMMs) that are what to consider when building an ES. The structure of Chesar (Chemical Safety Assessment and Report tool) developed by European Chemicals Agency (ECHA) is studied with a review of the available exposure estimation tools for workers, environment and consumers. Case example of generic exposure scenario (GES) for organic solvent is presented. To guide Korean EU-exporting companies, their participating roles in three steps of preparing ES are addressed.

• Nuclear Engineering and Technology
• /
• v.46 no.4
• /
• pp.547-556
• /
• 2014

Korea expects a shortage in storage capacity for spent fuels at reactor sites. Therefore, a need for more metal and/or concrete casks for storage systems is anticipated for either the reactor site or away from the reactor for interim storage. For the purpose of interim storage and transportation, a dual purpose metal cask that can load 21 spent fuel assemblies is being developed by Korea Radioactive Waste Management Corporation (KRMC) in Korea. At first the gamma and neutron flux for the design basis fuel were determined assuming in-core environment (the temperature, pressure, etc. of the moderator, boron, cladding, $UO_2$ pellets) in which the design basis fuel is loaded, as input data. The evaluation simulated burnup up to 45,000 MWD/MTU and decay during ten years of cooling using the SAS2H/OGIGEN-S module of the SCALE5.1 system. The results from the source term evaluation were used as input data for the final shielding evaluation utilizing the MCNP Code, which yielded the effective dose rate. The design of the cask is based on the safety requirements for normal storage conditions under 10 CFR Part 72. A radiation shielding analysis of the metal storage cask optimized for loading 21 design basis fuels was performed for two cases; one for a single cask and the other for a $2{\times}10$ cask array. For the single cask, dose rates at the external surface of the metal cask, 1m and 2m away from the cask surface, were evaluated. For the $2{\times}10$ cask array, dose rates at the center point of the array and at the center of the casks' height were evaluated. The results of the shielding analysis for the single cask show that dose rates were considerably higher at the lower side (from the bottom of the cask to the bottom of the neutron shielding) of the cask, at over 2mSv/hr at the external surface of the cask. However, this is not considered to be a significant issue since additional shielding will be installed at the storage facility. The shielding analysis results for the $2{\times}10$ cask array showed exponential decrease with distance off the sources. The controlled area boundary was calculated to be approximately 280m from the array, with a dose rate of 25mrem/yr. Actual dose rates within the controlled area boundary will be lower than 25mrem/yr, due to the decay of radioactivity of spent fuel in storage.

• Food Science and Preservation
• /
• v.22 no.6
• /
• pp.804-810
• /
• 2015

Salvia miltiorrhiza has been used for treating heart and liver disease. In the present study, the influences of temperature on photosynthetical capacity of S. miltiorrhiza under controlled cultivation environment using growth chamber were investigated because of providing information about growth and secondary metabolite synthesis. And effect of harvesting time on growth properties and constituents such as salvianolic acid B, cryptotanshinone, tanshinone I, tanshinone IIA were evaluated. Maximum photosynthesis rate ($5.102{\mu}mol\;CO2/m2/s$) and net apparent quantum yield ($0.147{\mu}mol\;CO2/m2/s$), stomatal conductance (0.035 mmol/m2/s) and water use efficiency ($7.108{\mu}mol\;CO2/mmol\;H2O$) was highest at $20^{\circ}C$. Results of chlorophyll fluorescence showed that elevated temperature had contributed to reduce a quantum yield and electron flux in photosystem. This result demonstrated that favorable temperature condition was determined at $20^{\circ}C$. Contents of salvianolic acid B, cryptotanshinone, tanshinone I and tanshinone IIA was highest in root sample harvested at 20 March, whereas growth and yield of S. miltiorrhiza had no significant differences with harvesting time. Therefore, this study shows that temperature play an important role in photosynthetic activity and harvesting time have influence upon accumulation of constituents in root of S. miltiorrhiza.