• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.301-306
• /
• 2020

The vertical garden is an environment where plants have many limitations in their growth. In particular, the upper and lower parts of the foundation are characterized by unbalanced moisture distribution. And although it may vary depending on the installation location of the light, generally the base of the light is not in desperate need for plants to grow due to shade. The purpose of this study was to identify the physical characteristics of the vertical garden based on Felt through experiments, classify the location characteristics of the media, and suggest the method of installing the water quantity water frequency, and lighting according to the location characteristics of the foundation. As a result, it was found to be most appropriate to use a 4mm base for the vertical garden and to have an irrigation of about 10 minutes once every 6 hours. In addition, it was found that in order to create a light condition for sufficient growth of plants, light bulbs should be installed at the upper and lower parts of the foundation. As a result of irrigation and lighting tests, the results of the above-mentioned plants need to be referred to in selecting plants that are introduced to vertical gardens, as the results show that the upper part of the foundation has a lower moisture rate and a stronger light than the lower part, and the lower part has a higher moisture rate and a weaker light than the upper part. In the future, we would like to present more accurate methods of selecting and maintaining plants by conducting plant experiments using the underlying characteristics found in this study.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.2
• /
• pp.64-70
• /
• 2011

Portable artificial electronic nose (E-nose) system suffers from noisy fluctuation in surroundings such as temperature, vapor concentration, and gas flow, because its measuring condition is not controled precisely as in the laboratory. It is important to develop a simple and robust vapor recognition technique applicable to this uncontrolled measurement, especially for the portable measuring and diagnostic system which are expanding its area with the improvements in micro bio sensor technology. This study used a PDA-based portable E-nose to collect the uncontrolled vapor measurement signals, and applied the image matching algorithm developed in the previous study on the measured signal to verify its robustness and improved accuracy in portable vapor recognition. The results showed not only its consistent performance under noisy fluctuation in the portable measurement signal, but also an advanced recognition accuracy for 2 similar vapor species which have been hard to discriminate with the conventional maximum sensitivity feature extraction method. The proposed method can be easily applied to the data processing of the ubiquitous sensor network (USN) which are usually exposed to various operating conditions. Furthermore, it will greatly help to realize portable medical diagnostic and environment monitoring system with its robust performance and high accuracy.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.1
• /
• pp.41-49
• /
• 2008

Many machineries and equipments are being changing to various and complicated by development of recent technology and arrival of convergence age in distant future. These various and complicate equipments need more precise outcomes and low-power consumption sensors to get close and exact results. In this paper, we proposed fault tolerance and feedback theorem for sensor network and MEMS circuit which has a benefit of energy efficiency through wireless sensor network. The system is provided with independent sensor communication if possible as unused action, using idle condition of system and is proposed the least number of circuits. These technologies compared system efficiency after examining product of each Moving Distance by developed sensor which gives effects to execution of system witch is reduced things like control of management side and requirement for hardware, time, and interaction problems. This system is designed for practical application; however, it can be applied to a normal life and production environment such as "Ubiquitous City", "Factory Automata ion Process", and "Real-time Operating System", etc.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.1-10
• /
• 2011

As requirements of embedded system get complicated, the tool for analyzing the reliability of embedded software is being needed. A probabilistic modeling is used as the way of analyzing the reliability of a software and to apply it to embedded software controlling multiple devices. So, it is necessary to specialize that to embedded software. Also, existing reliability analyzers should measure the transition probability of each condition in different ways and doesn't consider reusing the model once used. In this paper, we suggest a reliability analyzer for embedded software using embedded software Markov chin model and a unit testing tool. Embedded software Markov chain model is model specializing Markov chain model which is used for analyzing reliability to an embedded software. And a unit testing tool has host-target structure which is appropriate to development environment of embedded software. This tool can analyze the reliability more easily than existing tool by automatically measuring the transition probability between units for analyzing reliability from the result of unit testing. It can also directly apply the test result updated by unit testing tool by representing software model as a XML oriented document and has the advantage that many developers can access easily using the web oriented interface and SVN store. In this paper, we show reliability analyzing of a example by so doing show usefulness of reliability analyzer.

• Korean Journal of Plant Taxonomy
• /
• v.43 no.2
• /
• pp.81-89
• /
• 2013

In general, studies of aerial parasitic plants known collectively as mistletoe have been carried out to investigate their ecological and agricultural characteristics. However, with the recently increased level of interest in medicinal resources, research on different types of Korean mistletoe has also increased. This study was carried out to review the work on the taxonomy and ecology of Korean mistletoe in preparation for the industrial use of these plants in the future. Mistletoe types are flowering plants belonging to Santalales, which exist in the form of parasites on the branches of trees or shrubs. In Korea, five taxa of four genera in two families of mistletoe exist: Viscum coloratum (Komarov) Nakai f. coloratum, Viscum coloratum (Komarov) Nakai f. rubroaurantiacum (Makino) Kitagawa and Korthalsella japonica (Thunb.) Engl. in Santalaceae, along with Loranthus tanakae Franch. et Sav. and Taxillus yadoriki (Sieb. ex Maxim.) Danser in Loranthaceae. As taxonomic studies of these species remain insufficient and given that the distribution ranges of these species are very wide, further observations pertaining to the morphological variations in each species are necessary. The distribution of mistletoes is known to be determined by the host specificity, the interval between the hosts, the environmental condition, the habits of the host plant, the eating characteristics of mediators in the area, and their habitat selection features.

• Economic and Environmental Geology
• /
• v.39 no.1 s.176
• /
• pp.75-82
• /
• 2006

Acid drainage occurs when sulfide minerals are exposed to an oxidizing environment. The objective of this study was to examine the optimum condition for creating a phosphate coating on standard pyrite surfaces for reduction of pyrite oxidation. The solution of $10^{-2}M\;KH_2PO_4,\;10^{-2}M\;H_2O_2$ was identified as the best phosphate coating agent for the reduction of pyrite oxidation. The formation of an iron phosphate coating on pyrite surfaces was confirmed with ore microscope and scanning electron microscope equipped with energy dispersive spectroscopy. The temperature did not significantly affect the formation of phosphate coating on the surface of pyrite. However, the phosphate coating was less stable at higher temperature than at lower temperature. The phosphate coating was quitely stable at wide range of pH and $H_2O_2$ concentration. The less than $3.4\%$ of phosphate was dissolved at pH 2.79 and 10.64 and less than $1.0\%$ of phosphate was dissolved at 0.1M $H_2O_2$. On the basis of these results, the phosphate coating can effectively reduce the negative environmental impact of acid rock drainage.

• Economic and Environmental Geology
• /
• v.29 no.5
• /
• pp.545-559
• /
• 1996

Rare metal (Nb-Zr-REE) ore deposits are located in the Chungju area. Geotectonically, the rare metal ore deposits are situated in the transitional zone between Kyeonggi massif and Okcheon belt. The rare metal deposits are distributed in Kyemyeongsan Formation which consist of schist and alkaline igneous rocks. Alkali granite has suffered extensive post-magmatic metasomatism and hydrothermal processes. The ore contains mainly Ce-La, Ta-Nb, Y, Y-Nd, Nd-Th group minerals. More than 15 RE and REE minerals are found in the ore deposits. Allanite, one of the Ce-La rich REE minerals belonging to the epidote group, is the most common mineral in the studied area. The allanite- bearing rocks may be devided into seven types by features of occurrence and mineral associations; zircon type (ZT), allanite-vein type (AT), feldspar type (KT), fluorite type (FT), quartz-mica type (QT), iron-oxide type (MT), and amphibole type (HT). The allanite veins (AT) and zircon rich rocks (ZT) contain the highest total REE contents. Differences in REE abundance can be interpreted in terms of varying portions of magmatic hydrothermal fluid. Petrographical and chemical data are presented for allanites which were collected from different types. The allanites show wide variations in optical properties, due in part to differences in their chemical composition (depending on the types) and to the degree of crystallinity of the individual specimens. Allanite metamicts in biotite are generally surrounded by well developed pleochroic haloes. Usually, allanite is accompanied by zircon and other REE-bearing minerals. CaO and total REE contents $({\sum}RE_2O_3)$ range from 9.29 to 18.79% and 11.66 to 26.31%, respectively. Also, SiO, (28.87~32.61%), $Al_2O_3$ (8.30~16.88%), and $Fc_2O_3$ (16.74~24.38%) contents show varying contents from type to type. The ${\sum}RE_2O_3$ of allanite has positive relationships with $Fe_2O_3$ and negative relaton with CaO, $SiO_2$, and $Al_2O_3$ Backscattered electron microscope images (BEl) of allanite shows that the its mineral composition and texture is very complex. The allanite-bearing hosts show distinct light REE enrichment with strong negative Eu anomaly except for HI. The HT has an almost flat REE distribution pattern with a small negative Eu anomaly. The chemical variation of the allanites with occurrences and mineral association can be related to condition of temperature and oxidation states in precipitation environment.

• Journal of Internet Computing and Services
• /
• v.14 no.4
• /
• pp.73-84
• /
• 2013

This study, based on flow theory and unified theory of acceptance and use of technology (UTAUT), examines various factors that influence the continuous use of mobile applications, particularly those providing users with satisfaction and pleasure as well as useful information. This study extends the previous studies that have been based on technology acceptance model, in which usefulness and ease of use are key determinants of use of new technology, by introducing flow theory in explaining the use of various technologies in mobile environment. For this purpose, this study employes a survey based field study and collects data from individuals who use fashion mobile apps since these are considered to provide fun and pleasures. This study finds that flow theory is a proper framework to understand the use of mobile technology, indicating flow experience is an important variable to determine the usage of fashion apps. In addition, performance expectation, effort expectation, social influence, and facilitation condition are found to be significant in influencing use of mobile apps, suggesting UTAUT still plays an important role in understanding the use of mobile technology.

• Korean Journal of Ecology and Environment
• /
• v.34 no.4 s.96
• /
• pp.267-276
• /
• 2001

The downstream reach of the Han River adjoining Seoul in Korea was the upper boundary of an estuary where tidal effect on the flow rate could be exerted. According to the comprehensive river regulation project, the river was channelize dand impounded by two overflow dams, which provided favorable condition for algal growth in this sewage polluted eutrophic reach. In this study primary productivity of phytoplankton was measured in the down reach and the autochthonous and allochthonous organic carbon loadings were estimated. Primary production of phytoplankton measured by C-14 uptake and P-I model method ranged from 140 to $4,890\;mgC\;m^{-2}\;d^{-1}$ (median value $1,865\;mgC\;m^{-2}\;d^{-1}$) showing the level of eutrophic lakes. Phytoplankton density that varied according to water flow rate was highest in spring. Allochthonous organic carbon loading was dominated by sewage input through tributaries in most of days except flood flow period. The average proportion of autochthonous carbon generation by phytoplankton was 40.9%, which is very high proportion for a lotic habitat.

• Korean Journal of Ecology and Environment
• /
• v.34 no.4 s.96
• /
• pp.261-266
• /
• 2001

Effects of elevated carbon dioxide ($CO_2$) on soil microbial processes were studied in a northern peatland. Intact peat cores with surface vegetation were collected from a northern Welsh fen, and incubated either under elevated carbon dioxide (700 ppm) or ambient carbon dioxide (350 ppm) conditions for 4 months. Higher algal biomass was found under the elevated $CO_2$ condition, suggesting $CO_2$ fertilization effect on primary production, At the end of the incubation, trace gas production and consumption were analyzed using chemical inhibitors. For methane ($CH_4$ ), methyl fluoride ($CH_3F$) was applied to determine methane oxidation rates, while acetylene ($C_2H_2$) blocking method were applied to determine nitrification and denitrification rates. First, we have adopted those methods to optimize the reaction conditions for the wetland samples. Secondly, the methods were applied to the samples incubated under two levels of $CO_2$. The results exhibited that elevated carbon dioxide increased both methane production (210 vs. $100\;ng\;CH_4 g^{-1}\;hr^{-1}$) and oxidation (128 vs. $15\;ng\;CH_4 g^{-1}\;hr^{-1}$), resulting in no net increase in methane flux. For nitrous oxide ($N_2O$) , elevated carbon dioxide enhanced nitrous oxide emission probably from activation of nitrification process rather than denitrification rates. All of these changes seemed to be substantially influenced by higher oxygen diffusion from enhanced algal productivity under elevated $CO_2$.