• Journal of Navigation and Port Research
• /
• v.32 no.2
• /
• pp.127-132
• /
• 2008

The safety degree of navigation for collision avoidance is closely related with the combination between mariner's behavior and navigational environment. The condition of navigational environment is mainly decided by navigable waters, ship traffic, rule of road, sea state, weather and so on. Especially, the condition of navigable waters and ship traffic in navigational environment are ones of the important factors to attain safe navigation when mariners are underway and crossing, head on or overtaking situation. Thus this paper is to analyze the characteristics of mariner's behavior for collision avoidance caused by ship traffic and navigable waters by analyzing the contents of questionnaire and the results of international collaborative research. As a result, it can be concluded that the density of ship traffic and the area of navigable waters affect mariner's ship handling for collision avoidance.

• Journal of Korean Society on Water Environment
• /
• v.22 no.5
• /
• pp.757-767
• /
• 2006

Biological assessments are the primary tool for evaluating the biological condition of a water body and makes it possible to understand accumulative and long-term effect of stressors. They also provide reliable biological information for which disturbed systems are to be restored. Sustainable water environment is not enough with attaining only the clean water, but it should sustain healthy and diverse aquatic life. Aquatic organisms are affected by various factors, including not only water quality but also habitat condition and stressors, and thus good condition of both physical and chemical water quality is prerequisite for sustaining healthy organisms. Therefore, biological assessment, along with other physical and chemical assessments, are crucial for evaluating the health of a water body. Overall, sustainability of water environment demands the attainment and maintenance of ecological integrity, which is resulted from the combination of physical, chemical and biological integrity. The biological criteria will play very important role in the water resource management and policy issues, and thus bioassessment program should be fully implemented and supported eventually by the law. To keep ecosystem health of water environment safely from the toxic pollutants and other stressors, the following suggestions need to be considered in environmental quality standards in Korea. For the first step, the biological indicators need to be introduced in evaluating river quality condition; they provide a qualitative description of biological condition of water body. Secondly, the biological water quality standards using biotic indices should be developed and implemented under the consideration of characteristics of Korean river systems. Lastly, the ecological status classification regime (ESCR) should be developed and introduced; it could be used in quality assessment of the water environment in general. In developing ESCR, integration of physico-chemical, biological, and habitat parameters should be taken into account.

• Journal of the Korean housing association
• /
• v.20 no.3
• /
• pp.1-10
• /
• 2009

The final aim of this study was to propose guidelines for the indoor environment of apartment remodeling projects. The first task of this study was to understand the major elements and the actual condition of the remodeling for apartment unit by carrying out in-depth interviews on residents and specialists. The open-access interviews were conducted with interior designers who have a wide experience of apartment remodeling and residents who live in recently remodeled apartment units. The second task was to evaluate the actual condition of the indoor environment and to analyze the main factors that affect the indoor environment in remodeled apartment units. Field measurements were carried out in twenty apartment units occupied after remodeling, recording indoor environment elements (indoor temperature, globe temperature, relative humidity, $CO_2$, CO, PM10, TVOC, HCHO, illumination, and equivalent noise level). Moreover, resident interviews and researcher observations were carried out to determine the contents of the remodeled unit and to investigate the architectural and living factors(like ventilation characteristics, etc.) related to the indoor environment. The results are as follows. The remodeling elements generally included the changing of lighting fixtures and finishing materials in all the spaces, the integration of the balcony into the children's room, the installation of furniture in the kitchen and the entrance, the changing storage furnitures and equipments in the bathroom. The average levels of each unit of relative humidity, $CO_2$, TVOC, HCHO, equivalent noise level, and illumination were proved to be on the whole in inadequate condition. The factors that affect these indoor elements were classified as remodeling factors (remodeling amounts, extent balcony integration, and lighting fixture exchange), ventilation characteristics, and living factors. According to these results, this research proposed the guidelines for the indoor environment in apartment remodeling projects.

• Journal of Korean Society on Water Environment
• /
• v.23 no.3
• /
• pp.314-318
• /
• 2007

The feasibility of the employment of waste oyster shell as an adsorbent for fluoride ion has been tested by considering the effect ionic condition on the adsorption of fluoride ion on oyster shell. The adsorption capacity of oyster shell for fluoride ion was found not to be significantly influenced by the ionic strength of aqueous environment. The existence of complexing agent such as nitrilotriacetic acid in wastewater decreased the adsorbed amount of fluoride ion by forming a stable complex of $CaT^-$ and the adsorption reaction of fluoride ion on oyster shell was examined to be endothermic. The coexisting heavy metal ionic adsorbate in wastewater hindered the adsorption of fluoride ion, however, its adsorbed amount was increased as the particulate size of adsorbent was decreased. Finally, a serial adsorption column test has been conducted for a practical application of adsorption process and the breakthrough of the column adsorption was observed in 22 hours under the experimental condition.

• KIEAE Journal
• /
• v.15 no.4
• /
• pp.29-35
• /
• 2015

Purpose: Double skin facade is a representative advantageous passive technology of building skin in the aspect of energy saving and environment improvement, reduces heat loss with buffer space in winter season and enhances indoor air and comfort of residents by activating natural ventilation in mid-season. However, in summer season, temperature increase in the intermediate space due to solar energy from exterior transparent skin could be a potential problem; also, relatively weak buoyancy of air caused by low density difference between double-skin facade could increase cooling load as air of intermediate space in high temperature hangs. However, proof data is insufficient to objectify such phenomenon. Method: In this study, researchers surveyed air temperature of intermediate space and airflow and diagnosed its cause targeting on applied multistory facade in the building which gives thermal uncomfort to residents. Also, the researchers produced Solar-air heat transfer coefficient meter, measured thermal boundary condition of double-skin facade, and presented the result of measurement as an objectified verification material regarding overheating phenomenon in the intermediate space of double-skin facade in summer season. Result: Inefficient condition was verified that total heat increases and overheating due to insufficient natural ventilation in multistory facade. In addition, logic behind preceding research was objectified and verified regarding high temperature phenomenon in the intermediate space which could increase cooling load in summer season.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.1
• /
• pp.19-22
• /
• 2017

This paper describes the efficient equipment maintenance that can offer the exact time for repair and change of component in root industry. A conventional method offered the fixed time for repair and change of component because the method is based on early guarantee specification of the component. However the operating condition of manufacturing field is often under worse condition than early guarantee condition for high productivity. So, most components can't use until early guarantee time due to the operation of various different condition. Therefore we suggest the useful method for efficient equipment-maintenance by manufacturing-field analysis and feedback database. For this, the classification of root industry and related equipment is performed and then the detail classification of the process and component for equipment maintenance. And the monitoring module is also designed to gather data for feedback process and the environment is basically implemented for aging and reliability test.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.281-284
• /
• 2008

The purposes of this study were to make clear the present condition of indoor thermal environment in apartment units and to analyze the relation of the living factors with indoor thermal elements. The field surveys consisted of measurements on physical elements and observations on living factors and interview on resident's subjective responses were carried out in 20 apartment units. The field surveys were carried out during the $January{\sim}March$ 2007. Measuring elements were air temperature, globe temperature, and relative humidity. As results, the averages of indoor temperature each houses were $21.2{\sim}27.2^{\circ}C$, the number of houses exceed the comfort zone were 4. The averages of globe temperature each houses were $21.3{\sim}27.5^{\circ}C$, 6 houses exceeded the comfort zone. The means of relative humidity were $19.5{\sim}58.8%$, relatively dry condition. The clothing value of residents were $0.39{\sim}0.89$ clo(average 0.68 clo). The average of thermal sensation ratings each room were $4.2{\sim}4.8$, 'neutral'$\sim$'slightly warm'. The results of regression analysis on relations of living factors with the thermal elements are as follow; ventilation time(outdoor air exchange), door opening time with balcony, and gas cooker use time had significant effect on indoor temperature.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.224-232
• /
• 2022

The purpose of this study was to investigate the pre- and post-exercise performance, edema, and pain of plyometrics in water and land environments. Twelve males in their 20s were selected as subjects and performed 10 sets of squat jumps 10 times in 2 environmental conditions (water and ground). There was no significant difference in iEMG of vastus medilais according to exercise conditions and time. In MPV of CMJ, there was no significant difference according to exercise conditions and time. The thigh circumference showed a significant difference according to the exercise condition and time, and was higher in the ground condition after exercise. There was a significant difference in pain according to the exercise condition and time, and it was found to be high after exercise, 48 hours, and 72 hours in the ground condition. We believe that plyometric training in an aquatic environment will have less swelling and pain compared to plyometric training conducted in a land environment, and the pain will improve quickly, so we think that training can be conducted in a relatively shorter period than in the land environment.

• 보존과학연구
• /
• s.25
• /
• pp.133-150
• /
• 2004

Once the object has been excavated at underwater condition, it should be subjected to condition that may cause its deterioration. Therefore, it is important that the object immediately keeps stable environment. It means that the object was excavated at underwater and it exposed the deterioration condition, as soon as possible it was not dried on surface, especially metallic and organic material. Iron objects is particularly notorious for rapid disintegration that it kept wet or stored in a stable environment. Ceramics, glass and stone were handled carefully that it prevented physical damage by mishandling. Organic materials of wood, leather, rope, bone must not be allowed to dry out because the creaking, shrinking and warping are well known disintegration. Therefore objects is basis of keeping stable condition in on-site and then it will have to pass through a detailed conservation process in the laboratory.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.9
• /
• pp.1189-1198
• /
• 2002

Policy base management system that can satisfy various user's request in distributed system environment recently and manage network resources efficiently is required. Described policy base management information consisted of ECA(Event-Condition-Action) rules so that efficient management of various communication network and consistent management policy may be available in this paper. Policy is consisted of Event, Condition and Actions to achieve when condition is satisfied. And we can present formality of dynamic function of management object as applying policy to ATM congestion control model been applying in real environment.