• Journal of the Korean Geosynthetics Society
• /
• v.19 no.1
• /
• pp.35-44
• /
• 2020

Design techniques for the deep mixing method, one of the soft ground improvement methods, include two ways to interpret the ground as composite ground and pile ground. However, since comparative studies on these two approaches are insufficient, it is difficult to clearly define the analysis criteria in the design. In this study, two-dimensional and three-dimensional analyses have been performed with different conditions. The three conditions, the embankment height, depth of soft ground, and replacement ratio of reinforcement zones were varied and the analysis was performed on the basis of the assumption of composite ground and pile ground for each condition. As a result, the minimum depth of improvement in the two-dimensional analysis was deeper by 6.85~9.08% than in the three-dimensional analysis. The pile ground analysis showed that the depth of improvement was deeper by 12.22~14.45% than the composite ground analysis. Based on these results, it is concluded that for more accurate design, three-dimensional analysis should be performed rather than two-dimensional analysis. also, it is judged that necessary to analyze the ground as composite ground for economical design, and as the pile ground analysis for stable design.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1532-1548
• /
• 2008

The tunnel type spillways is under construction to increasing water reservoir capacity in Dae-am dam. The tunnel outlet was planned to be made after installing slope stabilization system on natural slope there. Generally, the tunnel outlet is made perpendicularly to the slope, but in this case, it had to be made obliquely to the slope for not interrupting flow of river. Because of excavation in condition of natural slope caused to deflecting earth pressure, the outlet couldn't be made. So, artificial ground made with concrete that it was constructed in the outside of tunnel for producing the arching effect which enables to make a outlet. We were planned tunnel excavation was carried out after artificial ground made. Artificial ground made by poor mix concrete of which it was planned that the thickness was at least 3.0m height from outside of tunnel lining and 30cm of height per pouring. Spreading and compaction was planned utilized weight of 15 ton roller machine. In order to access of working truck, slope of artificial ground was designed 1:1.0 and applied 2% slope in upper pert of it for easily drainage of water. In addition to, upper pert of artificial ground was covered with soil, because of impaction of rock fall from upper slope was made minimum. The tunnel excavation of the artificial ground was designed application with special blasting method that it was Super Wedge and control blasting utilized with pre-percussion hole.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.3
• /
• pp.603-613
• /
• 2015

Smart-phone Applications are consists of UI(User Interface). During using applications, UI events such as button click and scroll down are transmitted to Smart-phone system with many changes of UI. In these UI events, various information including user-input data are also involved. While Keylogging, which is a well-known user-input data acquisition technique, is needed a restrictive condition like rooting to obtain the user-input data in android environment, UI events have advantage which can be easily accessible to user-input data on user privileges. Although security solutions based keypad in several applications are applied, we demonstrate that these were exposed to vulnerability of application security and could be obtained user-input data using UI events regardless of presence of any security system. In this paper, we show the security threats related information disclosure using UI events and suggest the alternative countermeasures by showing the replay-attack example based scenarios.

• Journal of the Korean Institute of Rural Architecture
• /
• v.2 no.2
• /
• pp.23-34
• /
• 2000

Many primary schools that have been an important role in the community at the same time local important facility not only local area but also all area in Korea have shown a situation for closing and into grating a school because of a social and political measure. The education policy for man power training and closing policy for small scale school not more than 100 students can't role in the rural development policy, coming farming and fishing villages. The reasons for thinking some application paradigm and closing schools have been important role in the point of education and culture parts. Of course, the application paradigm for closing school facility will get accomplished for a mood of local residents and a point of cultural deference, not keeping up unconditionally for closing a school. For accomplishing versatile purposes, initiative role of the organs of local education is very important. The organs of local education have an application paradigm that closing schools are the facilities for local organs of education will plan some specific facility to be matched for local special quality and connection quality of surrounding facility and environment. Before an application paradigm of closing school, it is very important that a fundamental factor for negligence the facility will be solved. Eventually, the organs of education have a plan for technical study of this paradigm and consider keeping and mending of closing facility, rent the facility for payment or not they want, and confer money problem not an unconditional scale.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1531-1539
• /
• 2014

Premature ventricular contraction(PVC) is the most common disease among arrhythmia and it may cause serious situations such as ventricular fibrillation and ventricular tachycardia. Nevertheless personalized difference of ECG signal exist, performance degradation occurs because of carrying out diagnosis by general classification rule. In other words, the design of algorithm that exactly detects abnormal signal and classifies PVC by analyzing the persons's physical condition and/or environment and variable QRS pattern is needed. Thus, PVC classification by personalized abnormal signal detection and QRS pattern variability is presented in this paper. For this purpose, we detected R wave through the preprocessing method and subtractive operation method and selected abnormal signal sets. Also, we classified PVC in realtime through QS interval and R wave amplitude. The performance of abnormal beat detection and PVC classification is evaluated by using MIT-BIH arrhythmia database. The achieved scores indicate the average of 98.33% in abnormal beat classification error and 94.46% in PVC classification.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.924-926
• /
• 2015

In this paper, we use the interface, which many countries concentrates research of Brain - Computer Interface with the device and MyndPlay based on the IoT intelligent Arduino. Finally we will make the Brain - Computer Connection environment, the purpose of Brain - Computer Interface. Recognizes the EEG of a person who wearing the equipment, analyze, classify, and we did a research to design an intelligent thing to suit user's condition. In addition, we use the XBee, and Bluetooth to communicate to other devices, such as smart phone. In conclusion, this paper check users current status via brain waves, and it allows to control the power and other objects by using the EEG(Electroencephalography).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1892-1897
• /
• 2012

Modern electronic circuits are of importance for the function of communication, traffic systems and security systems. An intentional threat to these systems could be of big casualties and economic disasters. This study has examined susceptibility of electronic circuits inside the cavity by HPEM(High Power Electromagnetics). The UWB measurements were done at an anechoic chamber using a RADAN voltage source, which can generate a transient impulse of about 200 kV. The HPEM wave penetrated inside the metal case appeared to the long damped ringwave of pulse length compared with the incident wave. In addition, the resonant frequency generated inside the metal case occurred primarily in the range of 1~3 GHz. The frequency band of 1~3 GHz was influenced on the electronic circuit, which was confirmed by an external antenna and an internal absorber. The electronic circuit was influenced by HPEM infiltrated into the cavity at the 86 kV/m out of the metal cases. Also in case of an absorber the susceptibility of an electronic circuit was smallest among other cases(aperture, antenna). It is considered that absorber has a function absorbing electromagnetic wave infiltrated into the cavity and simultaneously limiting resonance by varying a boundary condition inside the cavity. Based on the results, electronic equipment systems could be applied to protection that has suited system requirements.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.3
• /
• pp.279-287
• /
• 2010

Interior permanent magnet synchronous motor(IPMSM) adjustable speed drives offer significant advantages over induction motor drives in a wide variety of industrial applications such as high power density, high efficiency, improved dynamic performance and reliability. This paper proposes efficiency optimization control of IPMSM drive using adaptive fuzzy learning controller(AFLC). In order to optimize the efficiency the loss minimization algorithm is developed based on motor model and operating condition. The d-axis armature current is utilized to minimize the losses of the IPMSM in a closed loop vector control environment. The design of the current based on adaptive fuzzy control using model reference and the estimation of the speed based on neural network using ANN controller. The controllable electrical loss which consists of the copper loss and the iron loss can be minimized by the optimal control of the armature current. The minimization of loss is possible to realize efficiency optimization control for the proposed IPMSM. The optimal current can be decided according to the operating speed and the load conditions. This paper considers the design and implementation of novel technique of high performance speed control for IPMSM using AFLC. Also, this paper proposes speed control of IPMSM using AFLC1, current control of AFLC2 and AFLC3, and estimation of speed using ANN controller. The proposed control algorithm is applied to IPMSM drive system controlled AFLC, the operating characteristics controlled by efficiency optimization control are examined in detail.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1037-1040
• /
• 2013

Based on easy construction and operation compared with infra-structure communication netowrks, and rapid spreading of smart phone having high powered calculation ability and Wi/Fi function, usage of MANET(Mobile Ad-Hoc Network), which is configured with simply several terminals, is increased in applications of emergency communications, leisure, explorations. However, because of supporting difficulty of communication infra-structure makes some defects of malicious information intrusion like as hacking. In this paper, effects of transmission performance caused by information intrusion is analyzed. The results of published studies is based on environment of continuous intrusions, but this paper assumed intermittent attacking condition. In this paper, blackhole attack is used for intrusion type to MANET, voice traffic is used as a application traffic. Compuer simulation, based on NS-2, is used for measuring of performance parameters, and the analysis for the simulation results is shown as considerations of this paper.

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.95-102
• /
• 2006

Nowadays, GPS is used widely, especially in case which needs precise position information, such as car navigation systems and various kinds of position measuring instruments in an outdoor environment. According to their applications, there are many kinds of GPS receivers with different costs and error rates. The maximum error range of the general-purpose GPS receiver is within 30m, though the error rate depends on receiving rate of signal and weather condition. RTK(Real-Time Kinematic) and DGPS(Differential Global Positioning System) have more precise accuracy than the general-purpose GPS. However end users can't afford use them because of their high price and large size of equipments. In order for the end user to obtain precise position information, it is important that GPS receivers has portability and low price. In this study, we introduce a new system that offers precise position information using the DGPS mechanism satisfying low cost and portability.