• KIEAE Journal
• /
• v.16 no.3
• /
• pp.77-82
• /
• 2016

Purpose: The aim of this study is to calculate U-factor of the window using international standard methods and compare quantitative and tendency difference focused on ISO standard 15099 and ISO standard 10077. And the result of ISO standard calculation methods is verified using thermal performance experiment to evaluate applicability of domestic certification system. This study is utilized a basis for activation of domestic window certification system. Method: First, 16 cases are selected that is combined a variety of frame, Glazing, spacer, etc. The selected cases were simulated using WINDOW&THERM based on ISO 15099 and 10077 calculation method. Second, experiment was conducted based on Korean standard condition. Then, it was compared the error of experiment and simulation results. Through this process, ISO 15099 and 10077 calculation methods were evaluated accuracy and utilization. Result: The results show that the difference of ISO 15099 and ISO 10077-2 is maximum 5.4%. The results of comparing U-factor errors based on the Korea standard experiment test found 2.4%. Consequently, it will be possible to combination calculation methods of ISO 15099 and ISO 10077 for a single window.

• KIEAE Journal
• /
• v.13 no.4
• /
• pp.103-112
• /
• 2013

The Federal Democratic Republic of Nepal(Nepal) is one of the poorest country in the world. People in Nepal are having lots of housing problems including the lack of housing provision. Even Habitat for Humanity Nepal (HfH_Nepal) has developed various programs to diffuse ecological housing, still there are many problems due to financial and technological shortage. The purpose of this study is to verify the effects of suggestion of performance improvement for HfH_Nepal eco house with introduction of the housing situation and efforts to provide sustainable housing by HfH_Nepal in Terai plain. Ideas on CGI sheet roof with poor insulation, double panel bamboo wall and adobe brick wall which can overcome structural and waterproof flaws of the thin single panel bamboo wall. The experiment result shows that both ideas adapted to adobe brick house reduces daily temperature range 50.8% and humidity adjust effect. For the effective provision of adobe brick house, compressive strength was tested for the bricks made with locally available fiber materials. Brick with jute displayed 41.1% betterment than plain brick with closest packing condition while coconut and straw showed 25.1% and 7.9% improvement respectively. Technical and economic problems brought up during the building and experiment process were listed and countermeasures established. This kinds of building prototype houses and experiments can improve the living conditions of people in developing countries with little supplement of resources. Furthermore, consideration of locally available and affordable material can help the social and ecological sustainability in the world.

• KIEAE Journal
• /
• v.17 no.1
• /
• pp.23-28
• /
• 2017

Purpose: Many design index that are using in planning phase have been developed. The most popular things among them are Window to Wall Ratio and Surface to Volume Ratio. However there are some limits. Window to Wall Ratio cannot consider building size and Surface to Volume Ratio cannot do Window to Wall Ratio. Accordingly, in this paper, the Window to Floor Ratio was proposed that it can be considered both building size and Window to Wall Ratio. And analyzed correlation of energy demand. Method: For the test, 16 modules with the size of $6m{\times}6m{\times}4m$ were used to make 35 models with the same volume. The simulation was conducted to 945 cases using the window-to-wall ratio of 30, 50 and 70 % in three areas such as Seoul, Gwangju and Jeju and three kinds of windows. And IES_VE was used. Result: The findings above show that the Window to Floor Ratio that can be considered both building size and Window area have to become as design index. It was found out that design criteria with SHGC is necessary, not with the thermal performance (U-value). It is needed to additional analysis about residential building and the effect of 24-hours heating and cooling condition. It plans to carry out research to establish design indicators for climatic conditions in the country and building applications.

• Korean Journal of Health Education and Promotion
• /
• v.9 no.2
• /
• pp.103-120
• /
• 1992

The purpose of this study was designed for the model development of curriculum of school health education including learning-teaching method, through analysis of results compared between a regular schedule health instruction and irregular health education. And this study is an attempt to give fundamental information for establishing of school health subject as the concept and scope of the school health subject is still not recognized and accepted satisfactorily in Korea. The data were collected by questionnaire from middle school girls and were carried out from 1989 to 1991. The major results obtained from this study were as follows: A Analysis of the case of school health. instruction 1. The responses of students about health eaducation : The positive rate of answers on the 'Health education is very important subject' was 91.2%, and on the 'I can maintain well healthful life : int of selfcare' was 87.1%. 2. The condition on knowledge, attitude and practice about health education: Education group had higher scores than comparison group about all most of questions, especially sex-education and drug abuse prevention education. 3. All the case of disease early founded out during the health instruction were children disease such as bone-tumor, lymphoma, hydrocephalus, and leukemia. B. Model development of school health education 1. Component of the health education subject (1) Healthful Life → Personal Health (2) Physical anatomy and Prevention of disease → Community Health (3) Growth and Development(sex education) → Community Health (4) Environment and Health → Community Health (5) Previntion of drug abuse → Human Health (6) Safety life → Human Health 2. Leanning - teaching method of health instruction (1) A Model of leaning-teaching method : A regular circulating health instruction by the component health subject for 2 hours a month. (2) B Model of leaning-teaching method : A regular schedule health education for hour a week.

• Journal of the Korea society of information convergence
• /
• v.1 no.1
• /
• pp.41-46
• /
• 2008

Contents application from contents development of web technical base and with the operation different environment information of the educational resources integration the importance and necessity of the management central chain e-Learning system will be able to operate are raising its head with base. Is the actual condition which develops the development process where but, the education application currently is not standardized in base. Approaches with an educational domain from the present paper consequently, and defines MDA(Model Driven Architecture) coats e-Learning System. Also uses a studying contents standard metadata and about the contents storage space analyzes and plans the core property which uses MDA automatic tools leads and under developing boil e-Learning System will be able to provide the contents which does in actual professor own necessity.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.5 s.27
• /
• pp.110-118
• /
• 2005

This paper examines the method of evaluation for feasibility study factors on housing development projects which can assist project managers to asses potential sources of risk. The aim is to reduce uncertainty on the project objectives. The major initial goals for a feasibility analysis are to define a limited set of key related factors which apply to housing development project according to development and market environment, condition of project planning and economics. Thus, in order to construct types of factors related with the feasibility, the research executes Delphi Method subjected personnel in the task to explore housing development projects. Such exploration provide the information for Importance Index, Extra Weight and the Mean of Extra Weight that is used for constituting confines of factors related with a feasibility analysis.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.1
• /
• pp.8-17
• /
• 2002

This paper suggests that the immune algorithm can effectively be used in tuning of a PID controller. The artificial immune network always has a new parallel decentralized processing mechanism for various situations, since antibodies communicate to each other among different species of antibodies/B-cells through the stimulation and suppression chains among antibodies that form a large-scaled network. In addition to that, the structure of the network is not fixed, but varies continuously. That is, the artificial immune network flexibly self-organizes according to dynamic changes of external environment (meta-dynamics function). However, up to the present time, models based on the conventional crisp approach have been used to describe dynamic model relationship between antibody and antigen. Therefore, there are some problems with a less flexible result to the external behavior. On the other hand, a number of tuning technologies have been considered for the tuning of a PID controller. As a less common method, the fuzzy and neural network or its combined techniques are applied. However, in the case of the latter, yet, it is not applied in the practical field, in the former, a higher experience and technology is required during tuning procedure. In addition to that, tuning performance cannot be guaranteed with regards to a plant with non-linear characteristics or many kinds of disturbances. Along with these, this paper used immune algorithm in order that a PID controller can be more adaptable controlled against the external condition, including moise or disturbance of plant. Parameters P, I, D encoded in antibody randomly are allocated during selection processes to obtain an optimal gain required for plant. The result of study shows the artificial immune can effectively be used to tune, since it can more fit modes or parameters of the PID controller than that of the conventional tuning methods.

• Journal of Korean Public Health Nursing
• /
• v.17 no.2
• /
• pp.266-277
• /
• 2003

In order to investigate the working conditions related to cumulative trauma disorder(CTD) and symptoms of CTD, a survey was conducted covering 305 employees who were working in three furniture manufacturing companies in Kyungin area. Data were collected by using questionnaire of the Personal Ergonomics Profiles. The results were as follows : 1. The mean score of working conditions related to CTD was 0.95. The mean score of working conditions for labor workers were significantly higher than that of clerical workers. Among 4 factors of working conditions, the higher score were shown in the working and environment factors with 1.22 and 1.18, respectively. 2. Symptom prevalence rate of CTD for workers was $81.0\%\;{;}\;82.9\%$ for labor workers and $77.0\%$ for clerical workers. As for symptom of CTD in body part, higher rate were shown in lower back with $50.2\%$, shoulder and neck with $38.4\%\;and\;36.4\%$ respectively. 3. The score of symptom severity of CTD were 3.45. Significant difference was shown in symptom severity of forearm and wrist/hand part between labor and clerical workers. As for symptom severity of CTD in body part the higher score were shown in shoulder, ankle/foot, forearm. lower leg and elbow. and the highest score for labor workers were shoulder and ankle/foot and for clerical workers was lower back. 4. As a whole, symptom of CTD for workers positively correlated to working conditions. 5. Symptom of CTD for workers seemed to be significantly influenced by working factor, sex, working duration and working area factor.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.54-60
• /
• 2006

This study discusses characteristic of spatiotemporal changes of the sand barrier in the Nakdong estuarine for the last century, focusing on geomarphologic evolution and mobility of sand barriers in the view of coastal engineering. The Nakdong estuarine, the research subject, has a complexly changing natural environment by interaction between ground and marine elements such as ocean wave, tidal current, sediment, etc. Moreover, recently, unnatural geomorphologic changes (e.g., seaside reclamation, new harbor construction, etc.) has been radically increased in this area with increasing desire for coastal development. Because of this, its sand barrier has developed quite unstable condition. Therefore, to identify the development process of geomorphologic changes in this area, required is a close examination on historical characteristics of spatiotemporal changes of the sand barrier in relation to surrounding seaside reclamation and physical environmental changes. This study, based on the marine charts published in between 1927 and 1995 year, analyzes the length and area of the sand barrier for the last hundred years, and investigates the cause of the changes by looking into the change of water depth for the last two years and doing ocean-physical site observations. In conclusion, the sand barrier of the Nakdong estuarine expands toward the open sea by $7.4{\sim}26m$ in annual average, maintaining a fixed distance of $1,241{\sim}1.279m$, and its area is expected to increase about $2.8km^2$ annually. This is characterized by the wocean wave from the open sea and the discharge of Nakdong River.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.5
• /
• pp.85-91
• /
• 2009

A stainless steel that contains aggressive negative ion was known to decrease the corrosion resistance. Stainless steel with super corrosion resistance was developed for improvement of corrosion resistance. Super duplex stainless steel is widely used under sever environment because of good mechanical properties and corrosion resistance. Also, Super duplex stainless steel has long life in severe environments by showing the enough strength and corrosion resistance. But duplex stainless steel is not stabilized compared to austenite stainless steel in corrosion resistance. In this study, corrosion characteristic were investigated to super duplex stainless steel with additive 0.2% nitrogen with $SiO_2$ thin films coated or no coated by sol-gel method in 3.5% NaCl. From test results, corrosion current density in the heat-treated specimen for ${\sigma}$ phase precipitation was higher than that of different heat-treated specimen. Also, $SiO_2$ colloidal-coated specimen had not occurred almost corrosion.