• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.7
• /
• pp.650-657
• /
• 2006

The LPMS (Loose Part Monitoring Systems) are used widely for detecting the impact position in the nuclear reactor. There are some major methods to detect impact position in LPMS such as the triangular method, the rectangular method, the circular intersection method and so on. The time difference of these methods are calculated using S0-mode and A0-mode waves of each sensor. In this paper, we propose a method to detect impact position using the enveloped waves of acquired signals. The result of this paper show that the position detecting accuracy and reducing the processing time are proposed method is improved than traditional methods.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.1-6
• /
• 2010

Ball bearings are one of main components that support the rotational shaft in high speed rotary machinery. So, it is very important to detect the incipient faults and fault growth of bearing since the damage and failure of bearing can cause a critical failures or accidents of machinery system. In the past, many researchers mainly performed to detect the bearing fault using traditional method such as wavelet, statistics, envelope etc in vibration signals. But study on the detection technique for bearing fault growth has a little been performed. In this paper, we verified the possibility for monitoring of fault growth and detection of fault size in bearing outer-race by using the envelope powerspectrum and probabilistic density function from measured vibration signals.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.582-587
• /
• 2011

Acoustic Emission(AE) is widely used for early detection of faults for rotating machinery in these days because of its high sensitivity. AE signal has to need for transferring to low frequency range for the spectrum analysis included the fault mechanism. In transferring process, we lose a lot of fault information caused by unusable signal processing method. Discrete Wavelet Transform(DWT) is a method of signal processing for AE signatures, but the pattern of its mother function is not optimized with AE signals. So, we can lose the fault information when we want to use the DWT for AE signal. Therefore, in this paper, we will propose a novel pattern for DWT mother function, which is optimized with AE signals. And it will be applied to compare the results of DWT by daubechie and novel pattern.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.7
• /
• pp.555-561
• /
• 2014

Acoustic Emission technique is widely applied to develop the early fault detection system, and the problem about a signal processing method for AE signal is mainly focused on. In the signal processing method, envelope analysis is a useful method to evaluate the bearing problems and wavelet transform is a powerful method to detect faults occurred on rotating machinery. However, exact method for AE signal is not developed yet for the rotating machinery diagnosis. Therefore, in this paper two methods which are processed by Hilbert transform and DET for feature extraction. In addition, we evaluate the classification performance with varying the parameter from 2 to 15 for feature selection DET, 0.01 to 1.0 for the RBF kernel function of SVR, and the proposed algorithm achieved 94 % classification of averaged accuracy with the parameter of the RBF 0.08, 12 feature selection.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.4
• /
• pp.505-513
• /
• 2017

Cavitation is a phenomenon caused by vapour cavities that is produced in rapid pressure changes. When the cavitation happened, the sound pressure level of a underwater radiated noise is increased rapidly. As a result, it can increase the probability of the identification or classification of a our warship's acoustic signature by an enemy ship. However, there is a problem that it is hard to precisely detect the occurrence of a cavitation noise. Therefore, this paper presents recent improvements in terms of the cavitation noise measurement by using continuous wavelet transform and DEMON(Detection of Envelope Modulation on Noise) signal processing. Then, we present that the suggested scheme is more suitable for detecting the cavitation than existing algorithms.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.7
• /
• pp.898-902
• /
• 2018

A novel heart beat interval estimation algorithm is presented based on parabola approximation method. This paper presented a two-step processing scheme; a first stage is finding R-peak in the Electrocardiogram (ECG) by Shannon energy envelope estimator and a secondary stage is computing the interpolated peak location by parabola approximation. Experimental results show that the proposed algorithm performs better than with the previous method using low sampled ECG signals.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.2
• /
• pp.138-146
• /
• 2013

Passive sonars employ DEMON (Detection of Envelope Modulation on Noise) processing to extract propeller information from the radiated noise of underwater targets. Conventional DEMON processing improves SNR(Signal to Noise Ratio) characteristic by Welch method. The conventional Welch method overlaps several different time domain DEMON outputs to reduce the variance. However, the conventional methods have high computational complexity to get high SNR with correlated acoustic signals. In this paper, we propose new DEMON processing method that divides acoustic signal into several frequency bands before DEMON processing and averages each DEMON outputs. Therefore, the proposed method gathers independent acoustic signal faster than conventional method with low computational complexity. We prove the performance of the proposed method with mathematical analysis and computer simulations.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.1
• /
• pp.81-87
• /
• 1997

In this paper, a new pre-processing method for the recognition of single vowels by use of spectrum envelope is presented. We use new extraction method of a spectrum envelope using the diffusion filter bank. By dividing analysis band of a diffusion filter bank into subbands, we decreased the number of diffusion process. And, by increasing the number of difference, we got higher selectivity. As a result of them, we reduced the total processing time, and got higher enhancement of discrimination. By getting 88.3% of average recognition rate for single vowels of natural voice through computer simulation. We confirmed it to be useful for speech recognition which use spectrum analysis of the voice signal to have many frequency components.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.501-507
• /
• 1999

At the mobile unit for adaptation the propagation environment, it is necessity to adapt very fast the weight coefficient vector of adaptive array antenna In this paper, for the BPSK and BFSK signals with S/I=2, S/N=10 subband adaptive array signal processing method to the linear array antenna using the LMS & the Kalman filter algorithm is proposed. For the 4 elements equidistance linear array antenna systems LMS and Kalman algorithms with subband adaptive instruction principles using the subband signal processing method are adopted and the computer simulation results to the constant amplitude envelope signals such as BPSK or BFSK can be seen that the convergence characteristics of directional patterns and the signal following characteristics are more fast and stable.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.8
• /
• pp.795-801
• /
• 2014

This paper presents an efficiency enhancement for the high power amplifier using DDBS(Digitally-controlled Dynamic Bias Switching) method which dynamically provides the power amplifier with two bias voltage levels according to the input envelope signal. It is quite easy to adjust the control signal by using a digital processing. The fabricated DDBS PA was evaluated using an 64 QAM FDD LTE signal, which has a center frequency of 2.6 GHz, a bandwidth of 10 MHz and a PAPR of 9.5 dB. The DDBS increases the power amplifier's PAE(Power-Added Efficiency) from 40.9 % to 48 %, at an average output power level of 43 dBm.