• Journal of The Korea Institute of Healthcare Architecture
• /
• v.22 no.2
• /
• pp.35-44
• /
• 2016

Purpose: Recently, Universal design has been applied to a variety of concepts of social integration in the national legislation and institutions, however, the applying to urban railway station is not satisfied. Most of cases, the handicapped can not work continuously, universal design must be provided. Methods: This study derives the detailed criteria through comparing and analyzing an national and international universal design-related system in transit zone. And the status is investigated in transit zone of domestic urban railway station. Improved national standard requirements are derived considering the type of the handicapped and universal design principles. Result: The domestic status shows that the most lacking entry criteria is not specified in national standards or the design is a lowest-level required by criteria through comparing detailed criteria drawn into domestic analysis. Therefore, in order to provide a pedestrian environment to meet the universal design principles and requirements for the handicapped, there is a need to re-establish with a specific national standards. Implications: This study will draw on universal design standards for seamless transfer in transit zone of urban railway station. The next studies are needed to target the overall paths ranging from outside to landing in urban railway station.

• Tunnel and Underground Space
• /
• v.31 no.5
• /
• pp.333-359
• /
• 2021

Gases such as hydrogen and radon can be generated around the canister in high-level radioactive waste disposal systems due to several reasons including the corrosion of metal materials. When the gas generation rate exceeds the gas diffusion rate in the low-permeability bentonite buffer, the gas phase will form and accumulate in the engineered barrier system. If the gas pressure exceeds the gas entry pressure, gas can migrate into the bentonite buffer, resulting in pathway dilation flow and advective flow. Because a sudden occurrence of dilation flow can cause radionuclide leakage out of the engineered barrier of the radioactive waste disposal system, it is necessary to understand the gas migration behavior in the bentonite buffer to quantitatively evaluate the long-term safety of the engineered barrier. Experimental research investigating the characteristics of gas migration in saturated bentonite and research developing numerical models capable of simulating such behaviors are being actively conducted worldwide. In this technical note, previous gas injection experiments and the numerical models proposed to verify such behaviors are introduced, and the future challenges necessary for the investigation of gas migration are summarized.

• Journal of the Korean association of regional geographers
• /
• v.14 no.3
• /
• pp.199-211
• /
• 2008

This study looks into existing discussion about the entry time and the geographical criteria point of 'Ho-Nam' as a place name. And discusses the reason which the geographical criteria point is not clear with emphasis on the possibility of the geographical range change of place name. The result is as follows. Firstly, the regional criteria of 'Ho-Nam' is Kum-River if we consider direction and the role as a regional barrier among the existing offered criteria. Secondary, the criteria of Ho-Nam and Ho-Seo might be different each other. A place name of Ho-Nam had appeared before Chosun period as a geographical concept and changed to the cultural concept during Chosun period. And Ho-Seo was established in Chosun period. But 'Ho-Nam=Jeon-la Province' and 'Ho-Seo=Chung-cheong Province' is established during Chosun period as a cultural concept. Thirdly, the geographical range of Ho-Nam of Go-Ryeo period and Chosun period were different each other. Fourthly, the criteria of Ho-Nam may be the Han-River if we consider the entry time and geographical range change.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.4 no.1
• /
• pp.89-111
• /
• 2009

Since the financial crisis in 1997, the Korean economy has a steady increase of people who tend to establish their own business by 2008. Business foundations can be divided into independent businesses and franchise businesses. This study focuses on what type of business owners among franchise enterprisers can achieve success. This is intended to reduce trial and error by drawing upon success factors in the stages of establishment, operation, and achievement based on a total sample of 350 individual business sites. The result shows that the success factors in the stage of establishment include (1) Preparation such as foundation education (2) Marketing capability (3) Appropriateness of Business Item (4) Other founder's entry barrier, conglomerate's entry regulation and (5) Head Office Support including service education, market survey education, marketing support. On the other hand, the success factors in the stage of operation include the supervisor capability, Marketing capability, Head Office Support, Customer Management Capability and Employee Satisfaction. Additionally after choosing the major factors according to each stage, multiple regression analysis was processed and interpreted. Finally, we believe that the franchise or independent business foundations can make a profit as well as increase continuous sales and customer satisfaction only with thorough and careful preparation in all stages of foundation and operation. This study is expected to contribute to those who prepare new business in franchise domain to minimize failures with deep consideration of the success factors in the franchise.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.600-606
• /
• 2010

Purpose: Although traditional and current treatment strategies may demonstrate success, persistence or recurrence of difficult-to-heal wounds remain significant problems. A novel product, Hyalomatrix$^{(R)}$ (Fidia Advanced Biopolymer, Abano Terme, Italy) is a bilayer of an benzyl esterified hyaluronan scaffold beneath a silicone membrane. The scaffold delivers hyaluronan to the wound, and the silicone membrane acts as a temporary epidermal barrier. We present the results obtained with Hyalomatrix$^{(R)}$ in the treatment of difficult-to-heal wounds. Methods: From November, 2008 to March, 2010, Hyalomatrix$^{(R)}$ has been used on total 10 patients with wounds that were expected difficult to heal with traditional and other current strategies. After average 37.4 days from development of wounds, Hyalomatrix$^{(R)}$ was applied after wound debridement. On the average, Hyalomatrix$^{(R)}$ application period was 17.6 days. After average 16.5 days from removal of Hyalomatrix$^{(R)}$, skin grafts was performed. Results: In all cases, regeneration of fibrous granulation tissues and edge re-epithelization were present after the application of the Hyalomatrix$^{(R)}$. And all of the previous inflammatory signs were reduced. After skin grafts, no adverse reactions were recorded in 9 cases. But in one case, postoperative wound infection occured due to a lack of efficient fibrous tissues. In this model, the Hyalomatrix$^{(R)}$ acts as a hyaluronan delivery system and a barrier from the external environments. In tissue repair processes, the hyaluronan performs to facilitate the entry of a large number of cells into the wounds, to orientate the deposition of extracellular matrix fibrous components and to change the microenvironment of difficult-to-heal wounds. Conclusion: Our study suggests that Hyalomatrix$^{(R)}$ could be a good and feasible approach for difficult-to-heal wounds. The Hyalomatrix$^{(R)}$ improves microenvironments of difficult-to-heal wounds, reduces infection rates and physical stimulus despite of aggravating factors.

• Tunnel and Underground Space
• /
• v.29 no.4
• /
• pp.262-279
• /
• 2019

In the engineering barriers of high-level radioactive waste disposal, gases could be generated through a number of processes. If the gas production rate exceeds the gas diffusion rate, the pressure of the gas increases and gases could migrate through the bentonite buffer. Because people and the environment can be exposed to radioactivity, it is very important to clarify gas migration in terms of long-term integrity of the engineered barrier system. In particular, it is necessary to identify the hydro-mechanical mechanism for the dilation flow, which is a very important gas flow phenomenon only in medium containing large amounts of clay materials such as bentonite buffer, and to develop and validate new numerical approach for the quantitative evaluation of the gas migration phenomenon. Therefore, in this study, we developed a two-phase flow model considering the mechanical damage model in order to simulate the gas migration in the engineered barrier system, and validated with 1D gas flow modelling through saturated bentonite under constant volume boundary conditions. As a result of numerical analysis, the rapid increase in pore water pressure, stress, and gas outflow could be simulated when the dilation flow was occurred.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.4
• /
• pp.297-309
• /
• 2020

Coronaviruses were originally discovered as enzootic infections that limited to their natural animal hosts, but some strains have since crossed the animal-human species barrier and progressed to establish zoonotic diseases. Accordingly, cross-species barrier jumps resulted in the appearance of SARS-CoV, MERS-CoV, and SARS-CoV-2 that manifest as virulent human viruses. Coronaviruses contain four main structural proteins: spike, membrane, envelope, and nucleocapsid protein. The replication cycle is as follows: cell entry, genome translation, replication, assembly, and release. They were not considered highly pathogenic to humans until the outbreaks of SARS-CoV in 2002 in Guangdong province, China. The consequent outbreak of SARS in 2002 led to an epidemic with 8,422 cases, and a reported worldwide mortality rate of 11%. MERS-CoVs is highly related to camel CoVs. In 2019, a cluster of patients infected with 2019-nCoV was identified in an outbreak in Wuhan, China, and soon spread worldwide. 2019-nCoV is transmitted through the respiratory tract and then induced pneumonia. Molecular diagnosis based on upper respiratory region swabs is used for confirmation of this virus. This review examines the structure and genomic makeup of the viruses as well as the life cycle, diagnosis, and potential therapy.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.764-772
• /
• 2022

The shipping and port industries have traditionally been male-centered, and although the scope of entry for female mariners is increasing, the proportion of female workers is still low. However, research on career barriers and career decision levels in this industry has not yet been conducted. This study can explain the dif iculties in career development experienced by women in this industry and comprehensively explain the socio-cultural context or environmental factors to which the individual belongs in order to improve it. The purpose of this study was to derive career barrier factors and investigate how they affect career decision levels among female students enrolled in M University's Maritime College. The career barriers perceived by female students at Maritime College were derived from gender discrimination (GD), career undecided and lack of preparation (IOU), work-family conflict (WFC), lack of individual characteristics (LPQ), and lower-than-expected job prospects (LOE). As a result of analyzing how the derived career barrier factors af ect the career decision level, it was found that IOU had a significant negative effect on the career decision level. GD, WFC, LPQ, and LOE did not have a significant effect on career decision level. The study conclusions can be used as important data for career guidance and counseling for female maritime college women who want to overcome career barriers and improve their career decision-making levels.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.1
• /
• pp.54-64
• /
• 2006

Chromated copper arsenate (CCA), a wood preservative, has been widely used to protect wood products from attacks by bacteria, fungi and insects. However, the use of CCA is currently forbidden or limited to some applications in many countries because the toxic elements (Cr, Cu, and As) of CCA are released into the environments during outdoor uses, which may cause adverse health effects on humans and ecological systems. This study was conducted to investigate the distributions of chromium, copper and arsenic in soils adjacent to two CCA-treated wood structures. In a 7 month old pond entry structure, ten surface soil samples (0-2.5 cm) were collected at lateral distances of 0, 0.5, and 1 m from the stairway, and nine surface soil samples were collected beneath the deck. Nine top soil samples were taken from a 2 year old sound barrier structure at lateral distances of 0, 1, and 2 m. Background surface soil samples were also collected from each structure. Samples were analyzed for some physicochemical properties such as pH, electrical conductivity, organic matter content, and soil texture. Following the extraction of the elements with a microwave digestion system, samples were analyzed for Cr, Cu, and As. The concentrations of the three elements in soils adjacent to the structures were significantly elevated compared to the background levels, indicating that the elements have been leached out of the structures. Released e1ements showed lateral concentration gradients within 1 m. The elevations of the three elements in soils underneath the deck did not seem different (background-corrected concentrations: Cr, 5.01 mg/kg; Cu, 5.50 mg/kg; As, 4.91 mg/kg), while the elements in soils near the sound barrier were elevated in the order of As>Cu>Cr with measured concentrations of 49.7, 44.7 and 52.5 mg/kg, respectively. Background As, Cu, and Cr concentrations near the sound barrier were 9.88, 30.8, and 46.5 mg/kg, respectively. These results showed that CCA constituents are released into the environment and it is suggested that risk assessment need to be conducted to investigate harmful effects of the released elements on humans and ecological systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.1
• /
• pp.65-71
• /
• 2016

In recent years, 3D printing has received increasing attention due to releases of low-cost 3D printers based on open-source platform. 3D printing is expected to reduce the barrier to entry in the traditional manufacturing processes by increasing flexibility and creating an advantage to manufacture customized products at low costs. In this study, a unique eyeglass frame was designed to have a snake shape, which has an asymmetric geometry unlike traditional frames. The eyeglass frame was designed in a customized manner by reflecting dimensional characteristics of a customer's face. Finite element analysis was performed to investigate the structural safety of the 3D printed frames during the assembly process. The analysis also considered the effect of anisotropic material properties as determined by tensile tests. The eyeglass frame was then printed using the customized sizes and the best building process. The eyeglass frame was successfully assembled with lenses and without structural failure during its assembly procedure.