• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.281-287
• /
• 2024

In general, design education related to transportation has been recognized as a department specialized in transportation design or as an area of detailed transportation majors within industrial design majors. However, as technological, social, and environmental factors change, the concept of mobility and the ecosystem related to the mobility industry are diversifying, and accordingly, the category of mobility-related design is expanding further. Based on this background, this study is not a mobility design major, but it aims to find implications by analyzing the trend and type of topic selection related to the mobility ecosystem among the last five years of graduation design topics conducted in the design engineering major. As a result of the study, of a total of 131 graduation design works conducted over the past five years, about 30 works were highly related to mobility, and their types were very diverse. In conclusion, it was confirmed that the change and expansion of the mobility ecosystem expanding from products to services and systems were also reflected in the selection of graduation works in that various topics approached from user-centered and user experience were proposed and made into works.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.353-358
• /
• 2003

As fur quantitative evaluation of the amount of sediments released into the ambient waters by various works fur coastal development, the instrument and method of the measurement of suspended sediment concentration (SSC) are critical for estimating the efficiency of a silt screen to reduce the spreading of sediment plumes generated by coastal works. (omitted)

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.188-195
• /
• 2022

Although issuing change orders is a common practice in the construction phase of any project, non-structural utility subcontractors are struggling and seek to find a way to reduce change orders. Therefore, this paper presents the analysis results on change orders to cultivate possible suggestions and solutions on how to reduce or minimize change orders in mechanical, electrical, and plumbing (MEP) works. Change orders in non-structural utility works are analyzed based on six categories such as rerouting and change of location, changes in weight, rejected design by Office of Statewide Health Planning and Development, District Structural Engineer, or the Structural Engineer of Record, unforeseen conditions, changed equipment, and owner-initiated change. The analysis findings showed that rerouting and changing location is the most significant cause, followed by unforeseen conditions. The results not only contribute to the existing body of knowledge on change order research area, but also help MEP contractors reduce the time and cost of change orders.

• KIEAE Journal
• /
• v.15 no.2
• /
• pp.79-86
• /
• 2015

Purpose: The concept of the tectonic has researched to find out the identify of modern architecture. The meaning of traditional tectonic knowledge to emphasize structural joints and attention to detail in creativity has developed in various ways in contemporary architecture. The purpose of this study is to analyze the tectonic characteristics and architectural expressions of the light appeared in the works of Santiago Calatrava. Major features in his works could be found is to maximize structural beauties through deducing the architectural images from the nature and expressing the material properties and the kinetic structures, and thus, to ultimately create the functional space and form by connecting the light to the tectonic structure. Method: Accordingly, I tried to analyze the three works of Santiago Calatrava (the Milwaukee Art Museum, the Bodegas Ysios Winery and the City and Arts and Sciences) as following categories - the structural aesthetics, the expression of material properties, the relationship between he kinetic structures and the light. Result: According to the results of the study, Santiago Calatrava tried to create his own architectural aesthetic by combining structural tectonic with nature, material, regional place and culture. He also sought to express the tense and dynamic tectonic rather than the stable one in his works.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.1
• /
• pp.82-99
• /
• 1997

The purpose of this study is to establish work classification system of landscape construction in order to offer the basis of new estimation system of public landscape construction. New estimation system is based on historical construction data. For application of this system, the standard work classification system is necessary. Because extensive cost data should be accumulated under an unified construction work classification system. In the study of new estimation system carried by KICT(Korea Institute of Construction Technology), landscaping works belong to earth work of civil engineering. It looks very unreasonable work classification, because landscape archtecture has its own specialties and professional domain. In this study, information classification systems in the construction industry and various landscaping works of housing developments are analysed. As a result. a standard work classification system of housing landscape construction is proposed in section VI-3. This standard work classification structure consists of three levels divisions (i.e large work division, middle work division, small work division) . Now in this study, housing landscape construction works are divided into four large works and twenty six middle works. According to work attributes, middle and small work division is possible to subdivide into details.

• Structural Engineering and Mechanics
• /
• v.84 no.4
• /
• pp.561-573
• /
• 2022

This paper presents a new model to obtain the minimum area of the contact surface for rectangular isolated footings, considering that the contact surface works partially to compression (a part of the contact surface of the footing is subjected to compression and the other is not in compression or tension). The methodology is developed by integration to obtain the axial load "P", moment around the X axis "M_x" and moment around the Y axis "M_y". This document presents the simplified and precise equations of the four possible cases of footing subjected to uniaxial bending and five possible cases of footing subjected to biaxial bending. The current model considers the contact area of the footing that works totally in compression, and other models consider the contact area that works partially under compression and these are developed by very complex iterative processes. Numerical examples are presented to obtain the minimum area of rectangular footings under an axial load and moments in two directions, and the results are compared with those of other authors. The results show that the new model presents smaller areas than the other authors presented.

• Korean Architects
• /
• s.543
• /
• pp.46-51
• /
• 2014

• Journal of architectural history
• /
• v.15 no.3
• /
• pp.119-135
• /
• 2006

This study based on the hypothesis which the spatial qualities in the Mies's early works are not extinct but potentially immanent in his latter works. In Mies's early works, destruction of outline, centrifugal extension of fluid space, and asymmetry are distinctly showed. These qualities probably revert to the indefiniteness of space. In Mies's latter works, however, these dynamic qualities are disappeared. Geometrically precise outline and exact grid structure represent universal space derived from zero-degree pure box. These qualities probably revert to tile definiteness of space, characterized by the unmovable emptiness. Although Mies works vary in external form, his expression technique of space reveals continually both the qualify of definitive and indefinitive space. For example, in the Museum for a Small City(1942) unbuilt project. elements defined by the perspective are fixed and static, but elements defined by the collages are floated and dynamic. The former reigns over the realized buildings of Mies, while the latter seems to be latent in terms of Schein which transcends reality. If we can penetrate this point, it's possible to read the other side of Mies' architectural works, distinct from both the canonized interpretation and the excessive criticism. Point is that later works of Mies must be understood as interplay of universal space appeared as phenomenon and flowing elements latent in. Architectural space of Mies keeps a distance with actual space through latent manner of being while preserves the empirical actuality It provides us with an occasion which appears only in an instant, in which even the ordinary things reveal its poetics.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.446-449
• /
• 2003

Recently, large residental buildings including high-rise apartment and a multi-business and commercial-residential building are appearing in the form of Korean construction work. According to this large-size trend a tenn and cost of construction works was largely increased. Therefore, studies of techniques construction management for successful project are lively being progressed. This study introduced Just-In-Time form and Lean Construction concept in order to establish management system of a house construction work taking up much portion on aspects of work scale and materials transportation in finishing works of high-rise residental building architecture. The process of house construction works will be analyzed with these two principles for productivity improvement and then the improvement plan will be suggested. This analysis and proposal can induce the flow of finishing works smoothly and contribute to success of project through saving of a tenn and cost of construction works.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.10a
• /
• pp.39-45
• /
• 2000

A small camera module fabricated by including bare chip bonding methods is utilized to realize advanced mobile devices. One of the driving forces is the TOG (Tape On Glass) bonding method which reduces the packaging size of the image sensor clip. The TOG module is a new thinner and smaller image sensor module, using flip chip interconnection method with the ACP (Anisotropic Conductive Paste). The TOG production process was established by determining the optimum bonding conditions for both optical glass bonding and image sensor clip bonding lo the flexible PCB. The bonding conditions, including sufficient bonding margins, were studied. Another bonding method is the flip chip bonding method for DSP (Digital Signal Processor) chip. A new AC\ulcorner was developed to enable the short resin curing time of 10 sec. The bonding mechanism of the resin curing method was evaluated using FEM analysis. By using these flip chip bonding techniques, small camera module was realized.