• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.121-128
• /
• 2005

In this study the influences of ground motion characteristics and structural properties on energy demands were evaluated using 100 earthquake ground motions recorded in different soil conditions, and the results were compared with those of previous works. Results show that ductility ratios and the site conditions have significant influence on input energy. The ratio of hysteretic to input energy is considerably influenced by the ductility ratio and damping ratio, while site condition has minor effects.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.471-474
• /
• 2003

There has been a steady increase in geoenvironmental engineering projects where geotechnical engineering has been combined with environmental concerns. This study investigate on contaminant around unsanitary landfill situated in urban area and was carried out to evaluate the geoenvironmental characteristics of this site. As a result of this study, groundwater and soil around this landfill site was evaluated for analysis of physical and chemical properties.

• Journal of Microbiology
• /
• v.41 no.2
• /
• pp.169-173
• /
• 2003

A treatability investigation was conducted to determine if landfarming would be effective for the remediation of unsanitary landfill waste soils. Calculations based on biodegradable organic carbon contents and initial CO$_2$ evolution rates revealed that landfarming has a high potential for landfill site remediation and that the optimum strategy for bioremediation is site-specific.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.219-222
• /
• 2001

Membranes which selectively transport specific metals on an industrial scale is much useful in a number of applications, such as aqueous stream purification, catalyst and recycling of the reactants, the applications in metal ion sensing and so forth. Numerous studies have been already made to use liquid, supported liquid and, emulsion liquid membranes (LM) for selective carriers for metal ion transport. (omitted)

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.755-760
• /
• 2009

It is essential to carry out site investigations such as SPT, CPT sampling etc. to understand the characteristics of soil deposits. However, the results deduced only from the engineering standpoint have limited information to fully understand ground characteristics. In this study, it is discussed site investigation results on Youngjong deposits obtained from not only the geotechnical standpoint, but also geotechnical and geological mixed standpoint to understand correct characteristics of Youngjong soil deposit.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.2
• /
• pp.37-46
• /
• 2000

본 논문에서는 부지특성을 고려한 설계지반운동의 산정방법을 연구하였으며 그 해석결과를 지반 구조물의 내진설계에 적용하는 방법을 제안하였다 지진응답 해석시 사용되는 설계응답스펙트럼과 설계시간 이력등의 입력운동의 통제점 위치가 지반구조물 내진설동 지층내 암반운동 그리고 노두운동을 사용하는 방법으로 나눌 수 있고 이에 따라 작용 설계지진운동이 변화하므로 지반구조물의 경계조건에 적합한 방법을 사용하여야 한다.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.03a
• /
• pp.69-76
• /
• 2003

Near-field ground motions exhibit special characteristics that are different from ordinary far-field ground motions. This paper first briefly examines the characteristics of near-field ground motions associated with fault directivity and fling-step effects. Then evaluation of near-field ground motions by inelatstic response spectrum analysis is performed and analyzed. As a result, ductility demand in near-field ground motions is larger in hanging wall than in foot wall in long period regions. Also in long period regions ductility demand in soil site is larger than that in rock site.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.897-901
• /
• 2005

In the highway engineering, the performance, quantity and status of machines available for the project have direct impact on the project time. For instance, the status of machines, such as working or in trouble, have great influence on the activity execution. Therefore, while scheduling the project, the project manager always increases the spare machines or prolong the activity time to avoid delaying the project time when some of the machines are in trouble in construction site. However, how many are the spare machines and how long are the prolonged activity time, which are estimated subjectively by the manager. This subjective estimation has been criticized for systematically overestimating or underestimating quantity of the machines and the activity time. In the paper, we propose and prototype a model to simulate the status of the machines in construction site, and then to evaluate the schedule feasibility considering the performance, quantity and statues of the machines involved.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.252-259
• /
• 2017

Nowadays, the existing manual method for recording actual progress of the construction site has some drawbacks, such as great reliance on the experience of professional engineers, work-intensive, time consuming and error prone. A method integrating computer vision and BIM(Building Information Modeling) is presented for indoor automatic progress monitoring. The developed method can accurately calculate the engineering quantity of target component in the time-lapse images. Firstly, sample images of on-site target are collected for training the classifier. After the construction images are identified by edge detection and classifier, a voting algorithm based on mathematical geometry and vector operation will divide the target contour. Then, according to the camera calibration principle, the image pixel coordinates are conversed into the real world Coordinate and the real coordinates would be corrected with the help of the geometric information in BIM model. Finally, the actual engineering quantity is calculated.

• Fire Science and Engineering
• /
• v.15 no.4
• /
• pp.24-33
• /
• 2001

This article proposes a strategy for producing accident scenarios in quantitative risk, which is peformed in process design or operation steps. Present worldwide chemical processes need off-site risk assessment as well as on-site one. Most governments in the world require industrial companies to submit the proper emergency plans through off-site risk assessment. Korea is also preparing for executing Integrated Risk Management System along with PSM and SMS. However.