• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.202-209
• /
• 2007

Vehicle body frame stiffness affects the dynamic and static characteristics. Vehicle frame structural performance is greatly affected by crossmember and joint design. While the structural characteristics of these joints vary widely, there is no known tool currently in use that quickly predicts joint stiffness early in design cycle. This paper presents the joint design factors affecting on low frequency vibration. The joint factors are joint panel thickness, section property, flange width and weld point space. To study the effect on vehicle low frequency vibration, case studies for these factors are performed. And Sensitivity analysis for section property is performed. The result can present design guide for high-stiffness vehicle.

• 펄프종이기술
• /
• 제38권4호
• /
• pp.61-67
• /
• 2006

The effect of several inorganic flame-retardants such as ammonium phosphate, ammonium sulfate, aluminum hydroxide and antimony trioxide on the flame-retardant property and tensile strength of paper has been investigated. Flame-retardants were used preferably as a dry powdered mixture and added to the furnish. Both dipping and coating treatments were employed to apply flame-retardants to paper Flame-retardant paper was manufactured by treatment of $5{\sim}30%$ flame-retardants by weight of the paper on a dry weight. Paper's flame-retardant property and tensile strength were examined by comparison of char length and tensile index. As dosages of flame-retardant chemicals increased, flame-retardant property was improved but tensile index was decreased.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.91-98
• /
• 2016

Cellulose nanofibrils (CNF) was made from oil palm trunk (OPT) with soda-anthraquinone pulping, chlorine dioxide bleaching, carboxymethylation, followed by mechanical grinding. Size of this CNF was 16-40 nm of width confirmed by TEM. To evaluate CNF from OPT as cosmetics raw materials for moisturizing component, water holding properties was compared with hyaluronic acid and collagen. CNF from OPT had better water holding property than collagen or hyaluronic acid whether phenoxyethanol was added as antiseptic or without additive.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.222-235
• /
• 2017

In this study, finite element modeling was used to predict the material properties of tri-axially braided textile composite. The model was made based on an experimental test specimen which was also used to compare the final results. The full interlacing of tows was geometrically modelled, from which repeating parts that make up the whole braid called unit cells were identified based on the geometric and mechanical property periodicity. In order to simulate the repeating nature of the unit cell, periodic boundary conditions were applied. For validation of the method, a reference model was analyzed for which a very good agreement was obtained. Material property calculation was done by simulating uniaxial and pure shear tests on the unit cell. The comparison of these results with that of experimental test results showed an excellent agreement. Finally, parametric study on the effect of number of plies, stacking type (symmetric/anti-symmetric) and stacking phase shift was conducted.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.137-144
• /
• 1999

The finite element method was adopted to find out the natural frequencies of a sinusoidally tapered beam with simply supported boundary conditions. The parameters considered in the numerical analysis are the taper parameter, $\alpha$ ($\alpha$=0.0, 0.1, ~ , 2.0) and the sectional property parameters, m and n [(m, n):(0, 2), (1, 3), (2, 4)]. It is generally known that the results of the numerical analysis corresponding to each pair of sectional property parameters, (m, n) are represented by second order polynominals of $\alpha$ . The coefficients of a in the polynominals are determined by using the regression technique, which reveals small m in most cases of given sectional property parameters (m, n).

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.118-125
• /
• 2004

The assessment of fatigue property is one of the most indispensable factors to design mechanical structures or parts. For accurately assessing fatigue property, it is necessary to precisely identify the loading condition and material property of the objective structure. However, there are many kind of problems in conducting predictive activity for a design concerned with variable factor such as fatigue phenomenons and environments. Therefore, most of the fatigue problems have been assessed from exiting experiment data and prediction method. In this study, expert system is developed for simply conducting performance assessment of weldments based on Finite element Analysis carrying out performance improvement and safety assessment of welded structures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.782-785
• /
• 1997

In this study, the spectra was surface-treated using $Ar^+$ ion beam to improve the tensile property of spectra/vinylester composites. The effect of surface treatment on the tensile property of spectra/vinylester composites was investigated comparing tensile strength and stiffness of surface-treated spectra/vinylester composites with those of untreated spectra/vinylester composites. The results showed that the tensile strength and stiffness of surface-treated s spectra/vinylester composites were 12% and 22% higher than those of untreated spectra/vinylester composites.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.555-556
• /
• 2006

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권6호
• /
• pp.806-813
• /
• 1999

The effect of Post-Weld Heat Treatment(PWHT) of SS400 Steel was investigated with parameters such as micro vickers hardness corrosion potential polarization behaviors galvanic current Al anode generating current Al anode weight loss etc. Hardness of each parts(HAZ, BM, WM)by PWHT is lower than that of each parts by Non Post-Weld Heat Treatment(NPWHT) However hardness of WM of HAZ part was the highest among those three parts and HAZ area were also acted as cathode without any case of heat treatment. Potential difference between each three parts by PWHT was also smaller compared to NPWHT. Therefore it is suggested that Corrosion resistance property is increased by PWHT. However both Al anode generating current and anode weight loss was also decreased by PWHT compared to NPWHT when SS400 steel is cathodically protected by Al anode.

• 한국CDE학회논문집
• /
• 제8권4호
• /
• pp.262-269
• /
• 2003

An approach to compute characteristic curves such as section curves, reflection characteristic lines, and asymptotic curves on a surface is introduced. Each problem is formulated as a surface-plane inter-section problem. A single-valued function that represents the characteristics of a problem constructs a property surface on parametric space. Using a contouring algorithm, the property surface is intersected with a horizontal plane. The solution of the intersection yields a series of points which are mapped into object space to become characteristic curves. The approach proposed in this paper eliminates the use of traditional searching methods or non-linear differential equation solvers. Since the contouring algorithm has been known to be very robust and rapid, most of the problems are solved efficiently in realtime for the purpose of visualization. This approach can be extended to any geometric problem, if used with an appropriate formulation.